P2487 Ford Code - Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5
Quick Answer
The P2487 Ford code indicates a problem with the Exhaust Gas Temperature (EGT) Sensor Circuit High for Bank 2 Sensor 5. Common causes include Faulty EGT Sensor: The EGT sensor itself may be faulty and in need of replacement, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause circuit high readings, Connector Problems: Poor connections at the sensor or ECM can lead to high voltage signals being sent. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2487 Ford indicates Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 5.
- Common causes
- Common causes include Faulty EGT Sensor: The EGT sensor itself may be faulty and in need of replacement, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause circuit high readings, Connector Problems: Poor connections at the sensor or ECM can lead to high voltage signals being sent.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2487 Ford Description
The P2487 Ford code indicates a problem with the Exhaust Gas Temperature (EGT) Sensor Circuit High for Bank 2 Sensor 5. This sensor is responsible for monitoring the exhaust gas temperature in order to optimize the engine's performance and emissions. When this sensor detects a high voltage signal, it triggers the code to be stored in the vehicle's computer system.
Common Causes of P2487 Ford
- Faulty EGT Sensor: The EGT sensor itself may be faulty and in need of replacement.
- Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can cause circuit high readings.
- Connector Problems: Poor connections at the sensor or ECM can lead to high voltage signals being sent.
- ECM Malfunction: A malfunction in the engine control module can also trigger this code.
Symptoms of P2487 Ford
- Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in power and acceleration due to the incorrect data being provided by the EGT sensor.
- Increased Emissions: The vehicle may fail emissions tests due to the malfunctioning sensor causing higher emissions levels.
- Rough Idle: The engine may idle roughly or inconsistently as a result of the EGT sensor issue.
How to Fix P2487 Ford
- Diagnose the Issue: Use a diagnostic scanner to retrieve the specific fault code and pinpoint the exact cause of the problem.
- Inspect Wiring and Connectors: Check the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Replace EGT Sensor: If the sensor is found to be faulty, it will need to be replaced with a new one.
- Clear Fault Code: After completing the repair, clear the fault code from the vehicle's computer system to reset the Check Engine Light.
- Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the EGT sensor is functioning properly.
Cost to Fix P2487 Ford
The cost of repairing a P2487 Ford code can vary depending on the specific cause of the issue and the labor rates in your area. On average, replacing an EGT sensor can cost between $150 and $250, including parts and labor. However, if additional wiring repairs or an ECM replacement is necessary, the cost could increase significantly. It's recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's make and model.
Need more information about the P2487 Ford code?
Need more information on how to fix the P2487 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2487 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2487 Ford Code
1. What does the OBDII code P2487 mean on a Ford vehicle?
P2487 indicates that the Exhaust Gas Temperature (EGT) Sensor Circuit High for Bank 2 Sensor 5 has been detected, meaning the sensor is reading a voltage outside its normal range.
2. What are the common symptoms of code P2487 in a Ford?
Symptoms may include an illuminated Check Engine Light, reduced engine performance, increased emissions, poor fuel economy, or the vehicle entering limp mode.
3. What causes the P2487 code to trigger?
Common causes include a faulty exhaust gas temperature sensor, damaged wiring or connectors, a short to power in the circuit, or a malfunctioning powertrain control module (PCM).
4. How can I diagnose the P2487 code?
Start by inspecting the EGT sensor and its wiring for damage or corrosion. Use a multimeter to check for proper voltage and resistance. Scan the vehicle for additional codes that could indicate related issues.
5. Can I drive my Ford with a P2487 code?
While it may be possible to drive short distances, it is not recommended. Prolonged driving can lead to increased emissions, reduced fuel efficiency, and potential damage to the exhaust system.
6. How do I fix the P2487 code on my Ford?
Repairs might include replacing the faulty EGT sensor, repairing or replacing damaged wiring or connectors, or reprogramming/updating the PCM if necessary.
7. Where is Bank 2 Sensor 5 located?
On Ford vehicles, Bank 2 refers to the side of the engine opposite Bank 1 (typically the side without cylinder 1), and Sensor 5 is usually located further downstream in the exhaust system near or after the catalytic converter.
8. What tools are needed to fix the P2487 code?
You may need an OBDII scanner, a multimeter, basic hand tools, and possibly a replacement EGT sensor to address the issue.
9. How much does it cost to repair the P2487 code on a Ford?
The cost depends on the specific repair. Replacing an EGT sensor typically costs between $100 and $300, including parts and labor, but wiring repairs or PCM updates may vary.
10. Can a dirty or clogged exhaust system cause the P2487 code?
Yes, a clogged exhaust system can cause excessive heat or pressure, potentially leading to an abnormal reading from the EGT sensor and triggering the code.
Discuss the causes and fixes for P2487 Ford OBDII Code
Code P2487 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.