P2482 2018 GMC Sierra Code - Exhaust Gas Temperature Sensor 5 Circuit High Voltage
Quick Answer
The P2482 diagnostic trouble code (DTC) indicates an issue with the Exhaust Gas Temperature (EGT) Sensor 5 Circuit High Voltage in a 2018 GMC Sierra. Common causes include Faulty EGT Sensor: The most common cause of the P2482 code is a faulty EGT sensor, which may be sending incorrect high voltage readings to the ECM, Wiring Issues: Damage or corrosion in the wiring connected to the EGT sensor can also trigger the high voltage signal, Exhaust Leaks: Leaks in the exhaust system can cause the EGT sensor to detect higher than normal exhaust gas temperatures. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2482 2018 GMC Sierra indicates Exhaust Gas Temperature Sensor 5 Circuit High Voltage.
- Common causes
- Common causes include Faulty EGT Sensor: The most common cause of the P2482 code is a faulty EGT sensor, which may be sending incorrect high voltage readings to the ECM, Wiring Issues: Damage or corrosion in the wiring connected to the EGT sensor can also trigger the high voltage signal, Exhaust Leaks: Leaks in the exhaust system can cause the EGT sensor to detect higher than normal exhaust gas temperatures.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2482 2018 GMC Sierra Description
The P2482 diagnostic trouble code (DTC) indicates an issue with the Exhaust Gas Temperature (EGT) Sensor 5 Circuit High Voltage in a 2018 GMC Sierra. The EGT sensor is responsible for monitoring the exhaust gas temperature in the vehicle's exhaust system. This information is crucial for the engine control module (ECM) to adjust fuel delivery and optimize engine performance. When the EGT sensor detects a high voltage signal, it means that the exhaust gas temperature is higher than normal, which can lead to various performance issues.
Common Causes of P2482 2018 GMC Sierra
- Faulty EGT Sensor: The most common cause of the P2482 code is a faulty EGT sensor, which may be sending incorrect high voltage readings to the ECM.
- Wiring Issues: Damage or corrosion in the wiring connected to the EGT sensor can also trigger the high voltage signal.
- Exhaust Leaks: Leaks in the exhaust system can cause the EGT sensor to detect higher than normal exhaust gas temperatures.
- Catalytic Converter Problems: Issues with the catalytic converter, such as clogging or damage, can affect the EGT sensor readings.
- ECM Malfunction: In rare cases, a malfunction in the engine control module (ECM) can lead to erroneous high voltage readings from the EGT sensor.
Symptoms of P2482 2018 GMC Sierra
- Check Engine Light: The most common symptom associated with the P2482 code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Engine Performance: The high voltage reading from the EGT sensor can lead to reduced engine performance, including decreased power and acceleration.
- Poor Fuel Efficiency: A malfunctioning EGT sensor can cause the ECM to adjust fuel delivery incorrectly, resulting in poor fuel efficiency.
- Increased Emissions: The high exhaust gas temperature can lead to increased emissions from the vehicle, which may fail emissions tests.
- Rough Idling: In some cases, the vehicle may experience rough idling or stalling due to the issues with the EGT sensor.
How to Fix P2482 2018 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the DTC and perform a thorough inspection of the EGT sensor, wiring, and exhaust system to identify the root cause of the high voltage reading.
- Replace EGT Sensor: If the EGT sensor is found to be faulty, replace it with a new sensor following the manufacturer's guidelines.
- Check Wiring: Inspect the wiring connected to the EGT sensor for any damage or corrosion, and repair or replace as necessary.
- Address Exhaust Leaks: Repair any leaks in the exhaust system to ensure accurate readings from the EGT sensor.
- Verify Repair: Clear the DTC from the ECM memory, and test drive the vehicle to ensure that the issue has been resolved and the check engine light does not reappear.
Cost to Fix P2482 2018 GMC Sierra
The cost of repairing the P2482 code related to the Exhaust Gas Temperature Sensor 5 Circuit High Voltage in a 2018 GMC Sierra can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of replacing an EGT sensor ranges from $150 to $300, including parts and labor. However, if additional repairs are needed, such as addressing exhaust leaks or replacing wiring, the total cost may increase.
Tech Notes for P2482 2018 GMC Sierra
Need more information about the P2482 2018 GMC Sierra code?
Need more information on how to fix the P2482 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2482 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2482 2018 GMC Sierra Code
What does the OBDII code P2482 mean on a 2018 GMC Sierra?
Code P2482 indicates an "Exhaust Gas Temperature Sensor 5 Circuit High Voltage" issue, meaning the voltage signal from sensor 5 is higher than the expected range.
What are the symptoms of code P2482 on a 2018 GMC Sierra?
Common symptoms include the check engine light turning on, reduced engine performance, poor fuel efficiency, and possible issues with the diesel particulate filter (DPF) system.
What causes the P2482 code on a 2018 GMC Sierra?
Typical causes include a faulty exhaust gas temperature (EGT) sensor, wiring issues such as damaged or corroded connectors, or an issue with the engine control module (ECM).
Can I drive my 2018 GMC Sierra with the P2482 code active?
While the vehicle may still be drivable, it’s not recommended. Driving with this code can lead to further damage to the DPF system or other exhaust components.
How do you diagnose the P2482 code on a GMC Sierra?
Diagnosis typically involves using a scan tool to confirm the code, inspecting the wiring and connections for damage, and testing the EGT sensor for proper operation and voltage output.
What is the function of the Exhaust Gas Temperature Sensor 5 on a 2018 GMC Sierra?
This sensor monitors the exhaust gas temperature to ensure proper operation of the emissions system and protect components like the DPF.
How do you fix the P2482 code on a 2018 GMC Sierra?
Common repairs include replacing the faulty EGT sensor, repairing or replacing damaged wiring or connectors, and clearing the code with a scan tool after repairs are complete.
How much does it cost to fix the P2482 code on a GMC Sierra?
Repair costs vary but typically range from $150 to $300, depending on whether the issue is a sensor replacement or wiring repair.
Can a bad EGT sensor affect fuel economy on a GMC Sierra?
Yes, a malfunctioning EGT sensor can lead to improper engine operation, reducing fuel efficiency and potentially causing other emissions-related issues.
Will clearing the P2482 code with a scan tool solve the problem?
Clearing the code may temporarily turn off the check engine light, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P2482 2018 GMC Sierra OBDII Code
Code P2482 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.