P2482 2016 GMC Sierra Code - Exhaust Gas Temperature Sensor 5 Circuit High Voltage
Quick Answer
The P2482 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the Exhaust Gas Temperature Sensor 5 Circuit High Voltage. Common causes include Faulty Exhaust Gas Temperature Sensor 5, Damaged wiring or connectors in the sensor circuit, ECM software issues. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2482 2016 GMC Sierra indicates Exhaust Gas Temperature Sensor 5 Circuit High Voltage.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor 5, Damaged wiring or connectors in the sensor circuit, ECM software issues.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2482 2016 GMC Sierra Description
The P2482 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the Exhaust Gas Temperature Sensor 5 Circuit High Voltage. This sensor is responsible for monitoring the exhaust gas temperature in the vehicle's exhaust system. When the sensor detects a high voltage signal, it means that the exhaust gas temperature is higher than normal, which can lead to various issues with the vehicle's performance.
Common Causes of P2482 2016 GMC Sierra
- Faulty Exhaust Gas Temperature Sensor 5.
- Damaged wiring or connectors in the sensor circuit.
- ECM software issues.
- Exhaust system leaks.
- Extreme driving conditions leading to high exhaust gas temperatures.
Symptoms of P2482 2016 GMC Sierra
- Check Engine Light illuminated on the dashboard.
- Decreased fuel efficiency.
- Rough idling or stalling.
- Increased emissions.
- Reduced engine performance.
How to Fix P2482 2016 GMC Sierra
- Begin by diagnosing the issue using a scan tool to confirm the P2482 code and identify the specific cause of the high voltage signal.
- Inspect the Exhaust Gas Temperature Sensor 5, wiring, and connectors for any visible damage or corrosion. Replace any faulty components.
- Clear the DTC and reset the ECM to see if the code reappears after repairs.
- Test drive the vehicle to ensure that the issue has been resolved and that the sensor is now providing accurate data to the ECM.
- If the problem persists, further diagnostics may be required to pinpoint the exact cause of the high voltage signal.
Cost to Fix P2482 2016 GMC Sierra
The typical repair costs for addressing the P2482 code on a 2016 GMC Sierra can range from $200 to $500, including parts and labor. This estimate may vary depending on the specific cause of the issue, the cost of replacement parts, and labor rates at auto repair shops. It's recommended to consult with a professional mechanic to get an accurate quote based on the individual circumstances of the vehicle. Keep in mind that rates for diagnosis time and labor can vary based on location, vehicle make and model, and the type of engine.
Tech Notes for P2482 2016 GMC Sierra
Need more information about the P2482 2016 GMC Sierra code?
Need more information on how to fix the P2482 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2482 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2482 2016 GMC Sierra Code
1. What does the OBDII code P2482 mean for a 2016 GMC Sierra?
The P2482 code indicates a high voltage issue in the circuit of Exhaust Gas Temperature (EGT) Sensor 5, which monitors exhaust gas temperatures.
2. What are the common symptoms of the P2482 code in a GMC Sierra?
Symptoms may include the check engine light turning on, poor fuel efficiency, reduced engine performance, or the vehicle entering limp mode.
3. What causes the P2482 Exhaust Gas Temperature Sensor 5 Circuit High Voltage code?
Causes can include a faulty EGT sensor, damaged wiring or connectors, a short circuit, or corrosion in the sensor's electrical components.
4. Can I drive my 2016 GMC Sierra with the P2482 code?
Driving with this code is not recommended, as it may lead to engine damage or further issues with the emissions system.
5. How is the P2482 trouble code diagnosed?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the EGT sensor and its wiring, and testing the sensor's voltage with a multimeter.
6. How do I fix the P2482 code on my GMC Sierra?
Repairs may involve replacing the faulty EGT sensor, repairing damaged wiring, cleaning corroded connectors, or updating the vehicle’s ECU software if necessary.
7. Where is Exhaust Gas Temperature Sensor 5 located on a 2016 GMC Sierra?
Sensor 5 is typically located in the exhaust system, downstream near the Diesel Particulate Filter (DPF) or catalytic converter.
8. How much does it cost to fix the P2482 code on a 2016 GMC Sierra?
Repair costs vary but typically range from $150 to $400, depending on whether the EGT sensor needs replacement or if wiring repairs are required.
9. Can a bad EGT sensor cause other issues in my GMC Sierra?
Yes, a faulty EGT sensor can affect emissions control, reduce fuel efficiency, and cause engine overheating or damage to the DPF system.
10. How can I prevent the P2482 code from reoccurring?
Regular maintenance, inspecting and cleaning exhaust system components, and addressing wiring issues promptly can help prevent this code from returning.
Discuss the causes and fixes for P2482 2016 GMC Sierra OBDII Code
Code P2482 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.