Engine-Codes.com
Engine-Codes – Dodge – P2480 Dodge

P2480 Dodge Code - Exhaust Gas Temperature Sensor Circuit/Open Bank 1 Sensor 5

Quick Answer

The P2480 diagnostic trouble code for Dodge vehicles indicates a problem with the Exhaust Gas Temperature Sensor Circuit/Open on Bank 1 Sensor 5. Common causes include Faulty Exhaust Gas Temperature Sensor: The sensor itself may be malfunctioning or have failed, leading to the open circuit, Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM, ECM Malfunction: A malfunction in the engine control module can prevent it from receiving accurate data from the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2480 Dodge indicates Exhaust Gas Temperature Sensor Circuit/Open Bank 1 Sensor 5.
Common causes
Common causes include Faulty Exhaust Gas Temperature Sensor: The sensor itself may be malfunctioning or have failed, leading to the open circuit, Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM, ECM Malfunction: A malfunction in the engine control module can prevent it from receiving accurate data from the sensor.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2480 Dodge Description

The P2480 diagnostic trouble code for Dodge vehicles indicates a problem with the Exhaust Gas Temperature Sensor Circuit/Open on Bank 1 Sensor 5. This sensor is responsible for monitoring the exhaust gas temperature in the exhaust system and sending this information to the engine control module (ECM). The ECM uses this data to adjust fuel delivery and optimize engine performance.

OBDII Code P2480 Dodge - Exhaust Gas Temperature Sensor Circuit/Open Bank 1 Sensor 5
P2480 Dodge Code - Exhaust Gas Temperature Sensor Circuit/Open Bank 1 Sensor 5

Common Causes of P2480 Dodge

  1. Faulty Exhaust Gas Temperature Sensor: The sensor itself may be malfunctioning or have failed, leading to the open circuit.
  2. Wiring Issues: Damaged or corroded wiring connections can disrupt the signal between the sensor and the ECM.
  3. ECM Malfunction: A malfunction in the engine control module can prevent it from receiving accurate data from the sensor.
  4. Exhaust System Leaks: Leaks in the exhaust system can affect the sensor's readings and trigger the P2480 code.
  5. Sensor Placement: If the sensor is improperly placed or installed, it may not provide accurate temperature readings.

Symptoms of P2480 Dodge

  1. Check Engine Light: The most common symptom associated with the P2480 code is the illumination of the Check Engine Light on the vehicle's dashboard.
  2. Reduced Power: The vehicle may go into a reduced power mode to prevent damage, resulting in decreased acceleration and overall performance.
  3. Poor Fuel Efficiency: A faulty exhaust gas temperature sensor can lead to improper fuel delivery, causing the vehicle to consume more fuel than usual.
  4. Rough Idling: The engine may experience rough idling or stalling due to incorrect temperature readings.
  5. Increased Emissions: The vehicle may produce higher emissions than usual due to the inaccurate data being sent to the ECM.

How to Fix P2480 Dodge

  1. Diagnostic Scan: Use a diagnostic scanner to retrieve the trouble codes and pinpoint the issue with the exhaust gas temperature sensor.
  2. Inspect Sensor: Check the sensor itself for any visible damage or signs of malfunction. Replace the sensor if necessary.
  3. Check Wiring: Inspect the wiring connections for any damage, corrosion, or loose connections. Repair or replace as needed.
  4. Clear Codes: Clear the trouble codes from the ECM and reset the system to see if the issue persists.
  5. Test Drive: Take the vehicle for a test drive to ensure that the repair has resolved the problem and that the Check Engine Light does not reappear.

Cost to Fix P2480 Dodge

The typical repair costs for addressing the P2480 code on a Dodge vehicle can range from $150 to $400, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It is advisable to check with local repair shops for a more accurate estimate based on your specific situation.

Need more information about the P2480 Dodge code?

Need more information on how to fix the P2480 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2480 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2480 Dodge Code

1. What are the common symptoms of OBDII code P2480 in a Dodge vehicle?

The common symptoms of code P2480 include a check engine light illuminated on the dashboard, reduced engine performance, and potential issues with the exhaust system.

2. What does the OBDII code P2480 Dodge indicate?

OBDII code P2480 indicates a problem with the Exhaust Gas Temperature Sensor Circuit/Open for Bank 1 Sensor 5 in a Dodge vehicle.

3. What are the possible causes of OBDII code P2480 in a Dodge?

The possible causes of code P2480 can include a faulty exhaust gas temperature sensor, wiring issues in the sensor circuit, a bad connection, or a damaged sensor.

4. How can I diagnose the OBDII code P2480 in my Dodge?

Diagnosing code P2480 involves using an OBDII scanner to retrieve the code, checking the wiring and connections of Bank 1 Sensor 5, and testing the sensor itself for proper functionality.

5. Can I still drive my Dodge with OBDII code P2480 present?

It is not recommended to drive your Dodge with code P2480 present, as it can lead to potential engine damage or other issues. It's best to address the problem promptly.

6. How can I repair OBDII code P2480 in my Dodge?

Repairing code P2480 involves replacing the faulty exhaust gas temperature sensor if necessary, repairing any damaged wiring or connections, and clearing the code with an OBDII scanner.

7. Is it possible to reset OBDII code P2480 in a Dodge without fixing the underlying issue?

While you can clear the code temporarily, it will likely reappear if the underlying issue causing code P2480 is not addressed. It's crucial to fix the problem to prevent further issues.

8. Are there any tips to prevent OBDII code P2480 from occurring in my Dodge?

To prevent code P2480, it's essential to perform regular maintenance on your vehicle, including checking the exhaust system components and sensors for any signs of wear or damage.

9. How serious is OBDII code P2480 in a Dodge?

Code P2480 should be taken seriously as it can affect the performance and efficiency of your vehicle. Ignoring the issue can lead to more significant problems over time.

10. Can a DIY enthusiast fix OBDII code P2480 in a Dodge?

Depending on your skills and experience, a DIY enthusiast may be able to address code P2480 by following repair guides and using the necessary tools. However, if unsure, it's best to consult a professional mechanic.

Discuss the causes and fixes for P2480 Dodge OBDII Code

Submit a New Comment

Code P2480 Dodge comments

No comments found for this page.