P247F Ford Code - Exhaust Gas Temperature Out of Range Bank 2 Sensor 4
Quick Answer
The P247F Ford diagnostic trouble code indicates that the exhaust gas temperature is out of range for Bank 2 Sensor 4. Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues, Malfunctioning ECM. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247F Ford indicates Exhaust Gas Temperature Out of Range Bank 2 Sensor 4.
- Common causes
- Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues, Malfunctioning ECM.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P247F Ford Description
The P247F Ford diagnostic trouble code indicates that the exhaust gas temperature is out of range for Bank 2 Sensor 4. This means that the exhaust gas temperature sensor located downstream in the exhaust system after the catalytic converter on the second bank of cylinders and fourth sensor position is reading a value that is outside of the expected range. This can have a significant impact on the vehicle's performance and emissions.
Common Causes of P247F Ford
- Faulty exhaust gas temperature sensor
- Wiring or connector issues
- Malfunctioning ECM
- Exhaust leaks
- Catalytic converter problem
Symptoms of P247F Ford
- Check engine light illuminated on the dashboard
- Decreased engine performance
- Reduced fuel efficiency
- Increased emissions
- Vehicle going into limp mode
How to Fix P247F Ford
- Connect a diagnostic scanner to the vehicle's OBD-II port to retrieve the specific fault codes and confirm that P247F is the issue.
- Inspect the exhaust gas temperature sensor, wiring, and connectors for any signs of damage or corrosion. Replace any faulty components.
- Check for exhaust leaks and repair them if necessary.
- Test the ECM to ensure it is functioning correctly. If not, replace or reprogram as needed.
- Clear the fault codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P247F Ford
The typical repair costs for resolving the P247F Ford code can vary depending on the specific cause of the issue. In general, the cost of replacing a faulty exhaust gas temperature sensor can range from $100 to $300, while repairing wiring or connector issues may cost between $50 to $150. If the ECM needs to be replaced or reprogrammed, this can cost anywhere from $200 to $800. Additionally, the cost of labor can range from $80 to $150 per hour, and the total repair cost will also depend on the specific diagnosis time required. It's recommended to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model.
Need more information about the P247F Ford code?
Need more information on how to fix the P247F Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247F Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247F Ford Code
1. What are common symptoms of the OBDII code P247F for Exhaust Gas Temperature Out of Range Bank 2 Sensor 4 in a Ford vehicle?
- Common symptoms include reduced engine performance, poor fuel efficiency, and the illumination of the Check Engine Light.
2. What are the possible causes of the P247F code in a Ford vehicle?
- Possible causes include a faulty exhaust gas temperature sensor, issues with the exhaust system, wiring or connector problems, or software glitches.
3. How can I diagnose the P247F code in my Ford vehicle?
- Diagnosing the code may involve using an OBDII scanner to retrieve the fault codes, checking the exhaust gas temperature sensor for proper functionality, and inspecting the wiring and connectors for any damage.
4. What is the recommended repair for the P247F code in a Ford vehicle?
- The recommended repair may include replacing the faulty exhaust gas temperature sensor, repairing any damaged wiring or connectors, and addressing any issues with the exhaust system.
5. Can I drive my Ford vehicle with the P247F code present?
- It is not recommended to drive with the P247F code present, as it can lead to further damage to the engine or emissions system.
6. How much does it typically cost to repair the P247F code in a Ford vehicle?
- The cost of repair can vary depending on the root cause of the issue, but it may range from $100 to $500 or more, including parts and labor.
7. Will resetting the Check Engine Light clear the P247F code in a Ford vehicle?
- Resetting the Check Engine Light may temporarily turn off the light, but the underlying issue causing the P247F code will need to be diagnosed and repaired to prevent it from reoccurring.
8. How often does the P247F code occur in Ford vehicles?
- The P247F code is relatively uncommon, but it can still occur due to sensor malfunctions, exhaust system issues, or other factors.
9. Are there any DIY tips for addressing the P247F code in a Ford vehicle?
- DIY tips may include checking the exhaust gas temperature sensor for visible damage, ensuring the wiring and connectors are secure, and performing a visual inspection of the exhaust system.
10. Can a mechanic easily fix the P247F code in a Ford vehicle?
- A qualified mechanic should be able to diagnose and repair the P247F code in a Ford vehicle by following proper diagnostic procedures and using the necessary tools and equipment.
Discuss the causes and fixes for P247F Ford OBDII Code
Code P247F Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.