P247D Ford Code - Exhaust Gas Temperature Out of Range Bank 2 Sensor 2
Quick Answer
The P247D Ford diagnostic trouble code indicates that the exhaust gas temperature from Bank 2 Sensor 2 is out of the normal operating range. Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247D Ford indicates Exhaust Gas Temperature Out of Range Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P247D Ford Description
The P247D Ford diagnostic trouble code indicates that the exhaust gas temperature from Bank 2 Sensor 2 is out of the normal operating range. This sensor is typically located after the catalytic converter on the right side of the engine. The exhaust gas temperature sensor plays a crucial role in monitoring the temperature of the exhaust gases to ensure optimal engine performance and emissions control.
Common Causes of P247D Ford
- Faulty exhaust gas temperature sensor
- Wiring or connector issues
- Exhaust leaks near the sensor
- Catalytic converter malfunction
- ECM software issues
Symptoms of P247D Ford
- Reduced engine performance or power
- Increased fuel consumption
- Illuminated Check Engine Light
- Rough idling or misfiring
- Failed emissions test
How to Fix P247D Ford
- Use an OBD-II scanner to retrieve the specific fault code and confirm the diagnosis.
- Inspect the exhaust gas temperature sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor's resistance and voltage output to determine if it is functioning correctly.
- Check for exhaust leaks near the sensor and repair as necessary.
- Replace the exhaust gas temperature sensor if it is faulty or damaged.
Cost to Fix P247D Ford
The cost of repairing the P247D Ford code can vary depending on the specific cause of the issue and the labor rates in your area. On average, the cost of replacing an exhaust gas temperature sensor ranges from $100 to $300, including parts and labor. Additional costs may apply if there are wiring or exhaust system repairs needed. It is advisable to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on your vehicle's make and model. Labor rates typically range from $80 to $150 per hour, but rates may vary based on location and shop type.
Need more information about the P247D Ford code?
Need more information on how to fix the P247D Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247D Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247D Ford Code
1. What are the common symptoms of OBDII code P247D in a Ford vehicle?
- Common symptoms include poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P247D Ford indicate about the exhaust gas temperature on Bank 2 Sensor 2?
- This code indicates that the exhaust gas temperature reading from Bank 2 Sensor 2 is out of the normal range specified by the vehicle's computer.
3. What are the possible causes of OBDII code P247D in a Ford vehicle?
- Possible causes include a faulty exhaust gas temperature sensor, wiring issues, exhaust system leaks, or problems with the vehicle's engine control module (ECM).
4. How can I diagnose the OBDII code P247D in my Ford vehicle?
- Diagnosing this code typically involves using a scan tool to read the specific trouble code, checking the exhaust gas temperature sensor's readings, and inspecting the wiring and connections for any issues.
5. What are some tips for repairing OBDII code P247D in a Ford vehicle?
- Repair tips may include replacing the faulty exhaust gas temperature sensor, repairing any wiring issues, fixing exhaust leaks, and ensuring proper connection of the sensor to the ECM.
6. Can I continue driving my Ford vehicle with OBDII code P247D present?
- It is not recommended to continue driving with this code present, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
7. How much does it typically cost to repair OBDII code P247D in a Ford vehicle?
- Repair costs can vary depending on the specific cause of the code and the labor rates in your area. It is advisable to get a diagnostic assessment from a qualified mechanic for an accurate estimate.
8. Is it possible to reset the OBDII code P247D in a Ford vehicle without repairing the issue?
- While you can clear the code using a scan tool, it is not recommended to do so without addressing the underlying problem, as the issue may persist and potentially cause more serious issues in the future.
9. How long does it usually take to repair OBDII code P247D in a Ford vehicle?
- The repair time can vary depending on the complexity of the issue and the availability of parts. Some repairs may be completed within a few hours, while others may take longer.
10. Are there any preventive measures to avoid OBDII code P247D in a Ford vehicle?
- Regular maintenance, such as checking the exhaust system for leaks, ensuring proper sensor function, and addressing any engine performance issues promptly, can help prevent the occurrence of this code.
Discuss the causes and fixes for P247D Ford OBDII Code
Code P247D Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.