P247C Dodge Code - Exhaust Gas Temperature Out of Range Bank 2 Sensor 1
Quick Answer
The P247C diagnostic trouble code for Dodge vehicles indicates that the exhaust gas temperature measured by Bank 2 Sensor 1 is out of range. Common causes include Faulty Bank 2 Sensor 1, Wiring or connector issues, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247C Dodge indicates Exhaust Gas Temperature Out of Range Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty Bank 2 Sensor 1, Wiring or connector issues, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P247C Dodge Description
The P247C diagnostic trouble code for Dodge vehicles indicates that the exhaust gas temperature measured by Bank 2 Sensor 1 is out of range. This sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine. When the temperature readings are outside of the expected range, it can lead to poor engine performance, reduced fuel efficiency, and potential damage to other components of the exhaust system.
Common Causes of P247C Dodge
- Faulty Bank 2 Sensor 1
- Wiring or connector issues
- Exhaust leaks near the sensor
- Engine running too lean or too rich
- Malfunctioning catalytic converter
Symptoms of P247C Dodge
- Check Engine Light illuminated on the dashboard
- Reduced engine performance or power
- Increased fuel consumption
- Rough idling or engine misfires
- Strong exhaust odor or smoke coming from the tailpipe
How to Fix P247C Dodge
- Connect an OBD-II scanner to the vehicle to confirm the P247C code and identify the specific sensor.
- Inspect the sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor's resistance and voltage to determine if it is functioning correctly.
- Replace the sensor if it is found to be faulty or damaged.
- Clear the error code and perform a test drive to ensure the issue has been resolved.
Cost to Fix P247C Dodge
The cost of repairing the P247C code on a Dodge vehicle can vary depending on the specific issue and the labor rates in your area. Generally, replacing a faulty sensor can cost between $150 to $300, including parts and labor. However, additional repairs or diagnostic tests may increase the overall cost. It's recommended to contact local auto repair shops for a more accurate estimate based on your vehicle's make and model.
Need more information about the P247C Dodge code?
Need more information on how to fix the P247C Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247C Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247C Dodge Code
1. What are the common symptoms of OBDII code P247C in a Dodge?
- Common symptoms include reduced engine performance, increased fuel consumption, and the illumination of the check engine light.
2. What does the OBDII code P247C indicating "Exhaust Gas Temperature Out of Range Bank 2 Sensor 1" mean for a Dodge vehicle?
- This code indicates that the exhaust gas temperature sensor in Bank 2 Sensor 1 is detecting a temperature outside the normal operating range.
3. What are the possible causes of OBDII code P247C in a Dodge?
- Possible causes include a faulty exhaust gas temperature sensor, wiring issues, exhaust system leaks, or a malfunctioning catalytic converter.
4. How can I diagnose the OBDII code P247C in my Dodge?
- To diagnose this code, you can use an OBDII scanner to read the code and check the exhaust gas temperature sensor readings. Inspect the wiring and connections for any issues.
5. Can driving with OBDII code P247C in a Dodge cause further damage?
- Driving with this code may lead to poor engine performance and increased fuel consumption. It is recommended to address the issue promptly to prevent potential damage to the catalytic converter.
6. How can I repair OBDII code P247C in my Dodge?
- Repair options include replacing the faulty exhaust gas temperature sensor, repairing any wiring issues, fixing exhaust leaks, or addressing any catalytic converter problems.
7. Is it safe to continue driving my Dodge with OBDII code P247C?
- While you may be able to drive the vehicle with this code, it is recommended to address the issue promptly to prevent potential engine damage and ensure optimal performance.
8. Will resetting the OBDII code P247C in my Dodge make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not addressed, the code is likely to reappear.
9. How much does it typically cost to repair OBDII code P247C in a Dodge?
- The cost of repair can vary depending on the exact cause of the code and the labor rates in your area. It is best to consult with a mechanic for a more accurate estimate.
10. Can I fix OBDII code P247C in my Dodge myself, or should I take it to a professional?
- While some DIY enthusiasts may be able to address this code themselves, it is recommended to seek the expertise of a qualified mechanic, especially for more complex issues like exhaust system repairs.
Discuss the causes and fixes for P247C Dodge OBDII Code
Code P247C Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.