P247A Dodge Code - Exhaust Gas Temperature Out of Range Bank 1 Sensor 3
Quick Answer
The P247A diagnostic trouble code for Dodge vehicles indicates that the exhaust gas temperature for Bank 1 Sensor 3 is out of range. Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues, Clogged or damaged exhaust system. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P247A Dodge indicates Exhaust Gas Temperature Out of Range Bank 1 Sensor 3.
- Common causes
- Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues, Clogged or damaged exhaust system.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P247A Dodge Description
The P247A diagnostic trouble code for Dodge vehicles indicates that the exhaust gas temperature for Bank 1 Sensor 3 is out of range. This means that the exhaust gas temperature sensor located in bank 1, sensor 3 is detecting a temperature that is either too high or too low, which can lead to performance issues and potential damage to the vehicle if not addressed promptly. The exhaust gas temperature sensor is an important component in the emissions system of the vehicle, as it helps regulate the temperature of the exhaust gases leaving the engine.
Common Causes of P247A Dodge
- Faulty exhaust gas temperature sensor
- Wiring or connector issues
- Clogged or damaged exhaust system
- Problems with the engine's combustion process
Symptoms of P247A Dodge
- Decreased fuel efficiency
- Reduced power output
- Rough idling or misfiring
- Engine overheating
- Check Engine Light illuminated
How to Fix P247A Dodge
- Begin by diagnosing the issue using a scan tool to determine the exact cause of the out-of-range exhaust gas temperature reading.
- Inspect the exhaust gas temperature sensor, wiring, and connectors for any visible damage or corrosion. Replace any faulty components.
- Check the exhaust system for any obstructions or damage that could be affecting the temperature readings. Clear any clogs or repair damage as needed.
- Test the engine's combustion process to ensure it is functioning correctly and adjust as necessary to bring the exhaust gas temperature back into the appropriate range.
- Clear the diagnostic trouble code from the vehicle's computer and test drive to verify that the issue has been resolved.
Cost to Fix P247A Dodge
The typical repair costs for addressing the P247A code for Dodge vehicles can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor in your area. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is recommended to obtain quotes from multiple shops to ensure you are getting a fair price for the repair. Keep in mind that rates at dealerships or in metropolitan areas may be higher, while independent shops may offer more competitive pricing.
Need more information about the P247A Dodge code?
Need more information on how to fix the P247A Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P247A Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P247A Dodge Code
What does the OBDII code P247A mean?
The code P247A indicates that the Exhaust Gas Temperature (EGT) sensor for Bank 1, Sensor 3, is reporting a temperature that is outside the expected range.
What symptoms might I experience with a P247A code?
Common symptoms include illuminated check engine light, reduced engine performance, increased emissions, and potential issues with the vehicle's exhaust system.
What causes the P247A code to trigger?
The code can be triggered by a faulty EGT sensor, wiring issues, exhaust leaks, or problems with the engine control module (ECM) that affect sensor readings.
How can I diagnose the issue related to the P247A code?
To diagnose the issue, check the EGT sensor and its wiring for damage, verify the sensor's resistance with a multimeter, and inspect for exhaust leaks near the sensor.
What are the potential fixes for a P247A code?
Potential fixes include replacing the faulty EGT sensor, repairing damaged wiring, fixing exhaust leaks, or reprogramming or replacing the ECM if it’s determined to be faulty.
Can I drive my vehicle with a P247A code?
While it may be possible to drive the vehicle, it is not recommended as it can lead to further damage or increased emissions. It’s best to address the issue promptly.
How do I clear the P247A code after repairs?
You can clear the code using an OBDII scanner, or by disconnecting the vehicle's battery for a short period. However, ensure that the underlying issue has been resolved first.
Is the P247A code serious?
Yes, the P247A code can indicate issues that may affect engine performance and emissions. It’s advisable to address it to avoid potential damage and ensure compliance with emissions regulations.
What is the location of Bank 1, Sensor 3 in a Dodge vehicle?
Bank 1 typically refers to the side of the engine with the first cylinder, and Sensor 3 is usually located downstream of the turbocharger or after the catalytic converter in the exhaust system.
Will a P247A code cause my vehicle to fail an emissions test?
Yes, since the code indicates an issue with the exhaust system, it could cause your vehicle to fail an emissions test due to increased emissions or improper exhaust temperature readings.
Discuss the causes and fixes for P247A Dodge OBDII Code
Code P247A Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.