P2474 GMC Code - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 4
Quick Answer
The P2474 GMC diagnostic trouble code refers to the Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 4. Common causes include Faulty exhaust gas temperature sensor, Damaged wiring or connectors in the sensor circuit, ECM software issues. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2474 GMC indicates Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 4.
- Common causes
- Common causes include Faulty exhaust gas temperature sensor, Damaged wiring or connectors in the sensor circuit, ECM software issues.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2474 GMC Description
The P2474 GMC diagnostic trouble code refers to the Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 4. This code indicates that there is a problem with the exhaust gas temperature sensor located in bank 2, which is typically associated with the right side of the engine. The sensor is responsible for measuring the temperature of the exhaust gases and sending this information to the engine control module (ECM) for proper fuel and air mixture adjustments.
Common Causes of P2474 GMC
- Faulty exhaust gas temperature sensor
- Damaged wiring or connectors in the sensor circuit
- ECM software issues
- Exhaust leaks near the sensor
- Exhaust gas temperature sensor circuit short or open
Symptoms of P2474 GMC
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation or lack of power during acceleration
- Engine misfires
- Check Engine Light illuminated
How to Fix P2474 GMC
- Perform a thorough inspection of the exhaust gas temperature sensor and its wiring for any visible damage or corrosion.
- Use a multimeter to test the sensor's resistance and voltage outputs to ensure it is functioning within the manufacturer's specifications.
- If the sensor is faulty, replace it with a new one and clear the diagnostic trouble codes from the ECM.
- Check the wiring and connectors for any signs of damage or corrosion, repair or replace as needed.
- Perform a final test drive to ensure the issue has been resolved and the Check Engine Light does not reappear.
Cost to Fix P2474 GMC
The typical repair costs for addressing the P2474 GMC code can vary depending on the specific cause of the issue and the cost of parts and labor. In general, replacing an exhaust gas temperature sensor can range from $100 to $300, while addressing wiring or connector issues may add additional costs. Labor rates at auto repair shops can vary but typically range between $80 and $150 per hour. It's advisable to check with local shops for a more accurate estimate based on your location and vehicle make and model.
Need more information about the P2474 GMC code?
Need more information on how to fix the P2474 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2474 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2474 GMC Code
1. What are common symptoms of OBDII code P2474 GMC?
- Common symptoms include reduced engine performance, increased fuel consumption, and the illumination of the Check Engine light.
2. What does OBDII code P2474 GMC indicate?
- This code indicates an issue with the Exhaust Gas Temperature Sensor Circuit Range/Performance for Bank 2 Sensor 4 in a GMC vehicle.
3. What are possible causes of OBDII code P2474 GMC?
- Possible causes include a faulty exhaust gas temperature sensor, wiring or connection issues, exhaust system leaks, or a malfunctioning engine control module (ECM).
4. How can I diagnose the cause of OBDII code P2474 GMC?
- Diagnosis typically involves checking the exhaust gas temperature sensor's resistance, inspecting the wiring and connections for damage, and performing a thorough inspection of the exhaust system.
5. Can I continue driving with OBDII code P2474 GMC?
- It is not recommended to continue driving with this code as it can lead to potential engine damage and may cause further issues if left unresolved.
6. How can I repair OBDII code P2474 GMC?
- Repair may involve replacing the exhaust gas temperature sensor, repairing any damaged wiring or connections, fixing exhaust leaks, or resetting the ECM after addressing the underlying issue.
7. Is it possible to reset OBDII code P2474 GMC without making repairs?
- While clearing the code may temporarily turn off the Check Engine light, it is not a permanent solution as the underlying issue causing the code will still persist.
8. Can a DIY enthusiast fix OBDII code P2474 GMC?
- Depending on the root cause, some DIY enthusiasts may be able to address this code by replacing the sensor or fixing minor wiring issues. However, more complex issues may require professional assistance.
9. How much does it cost to fix OBDII code P2474 GMC?
- The cost of fixing this code can vary depending on the specific issue, parts needed, and labor rates. It is recommended to obtain quotes from local mechanics or dealerships for an accurate estimate.
10. How often does OBDII code P2474 GMC occur in GMC vehicles?
- While not as common as some other OBDII codes, P2474 can still occur in GMC vehicles, especially in models equipped with exhaust gas temperature sensors.
Discuss the causes and fixes for P2474 GMC OBDII Code
Code P2474 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.