P2471 2014 Chevrolet Silverado Code - Exhaust Gas Temperature Sensor 4 Circuit High Voltage
Quick Answer
The P2471 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates a problem with the Exhaust Gas Temperature (EGT) Sensor 4 Circuit showing high voltage. Common causes include Faulty EGT Sensor: The sensor itself may be malfunctioning, leading to incorrect temperature readings, Wiring Issues: Damaged or corroded wiring connecting the EGT sensor to the ECM can cause high voltage readings, ECM Malfunction: A problem with the engine control module can also trigger the P2471 code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2471 2014 Chevrolet Silverado indicates Exhaust Gas Temperature Sensor 4 Circuit High Voltage.
- Common causes
- Common causes include Faulty EGT Sensor: The sensor itself may be malfunctioning, leading to incorrect temperature readings, Wiring Issues: Damaged or corroded wiring connecting the EGT sensor to the ECM can cause high voltage readings, ECM Malfunction: A problem with the engine control module can also trigger the P2471 code.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2471 2014 Chevrolet Silverado Description
The P2471 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates a problem with the Exhaust Gas Temperature (EGT) Sensor 4 Circuit showing high voltage. The EGT sensor is a crucial component in monitoring the temperature of the exhaust gases leaving the engine. This information is vital for the engine control module (ECM) to adjust fuel delivery and other parameters to optimize performance and emissions.
Common Causes of P2471 2014 Chevrolet Silverado
- Faulty EGT Sensor: The sensor itself may be malfunctioning, leading to incorrect temperature readings.
- Wiring Issues: Damaged or corroded wiring connecting the EGT sensor to the ECM can cause high voltage readings.
- ECM Malfunction: A problem with the engine control module can also trigger the P2471 code.
- Exhaust System Leak: A leak in the exhaust system can cause higher than normal exhaust gas temperatures, triggering the code.
- Software Update Needed: In some cases, a software update for the ECM may be required to resolve the issue.
Symptoms of P2471 2014 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Performance: The vehicle may experience a decrease in performance, such as reduced power or acceleration.
- Increased Emissions: High exhaust gas temperatures can lead to increased emissions output, potentially noticeable during emissions testing.
- Rough Idling: The engine may idle roughly or inconsistently due to incorrect fuel delivery adjustments.
How to Fix P2471 2014 Chevrolet Silverado
- Diagnostic Check: Begin by performing a diagnostic check to confirm the P2471 code and pinpoint the exact cause of the issue.
- EGT Sensor Replacement: If the sensor is found to be faulty, replace it with a new one to ensure accurate temperature readings.
- Wiring Inspection: Check the wiring connecting the EGT sensor to the ECM for any damage or corrosion. Repair or replace as needed.
- ECM Testing: Test the engine control module to ensure it is functioning correctly. Replace if necessary.
- Clearing Codes: After completing the repairs, clear the DTCs from the vehicle's memory and perform a test drive to verify that the issue has been resolved.
Cost to Fix P2471 2014 Chevrolet Silverado
The cost of repairing a P2471 code on a 2014 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, the cost of replacing an EGT sensor can range from $100 to $200, including parts and labor. However, if additional repairs such as wiring replacement or ECM testing are required, the total cost could be higher. It's recommended to consult with a qualified mechanic or auto repair shop for an accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates and diagnostic fees can vary, so it's advisable to shop around for the best deal.
Tech Notes for P2471 2014 Chevrolet Silverado
Need more information about the P2471 2014 Chevrolet Silverado code?
Need more information on how to fix the P2471 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2471 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2471 2014 Chevrolet Silverado Code
1. What does the OBDII code P2471 mean on a 2014 Chevrolet Silverado?
P2471 indicates that the Engine Control Module (ECM) has detected a high voltage signal from Exhaust Gas Temperature (EGT) Sensor 4, which monitors exhaust temperatures to protect components like the catalytic converter.
2. What are the common symptoms of code P2471 in a 2014 Chevrolet Silverado?
Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, or the vehicle entering limp mode.
3. What causes the P2471 code to appear on a 2014 Chevrolet Silverado?
Common causes include a faulty EGT sensor 4, damaged wiring or connectors in the sensor circuit, a short to power, or an issue with the ECM.
4. Where is Exhaust Gas Temperature Sensor 4 located on a 2014 Chevrolet Silverado?
EGT Sensor 4 is typically located in the exhaust system, downstream of the catalytic converter or diesel particulate filter, depending on engine configuration.
5. Can I drive my 2014 Chevrolet Silverado with a P2471 code?
While the vehicle may still be drivable, it's not recommended as prolonged driving with this code can lead to further damage to the exhaust system or emissions components.
6. How do I troubleshoot the P2471 code on a 2014 Chevrolet Silverado?
Start by inspecting the wiring and connectors for damage, testing the EGT sensor's resistance with a multimeter, and checking for any shorts or open circuits in the wiring.
7. How do I fix the P2471 code on my 2014 Chevrolet Silverado?
Repairs may include replacing the faulty EGT sensor 4, repairing or replacing damaged wiring or connectors, or reprogramming/updating the ECM if necessary.
8. How much does it cost to fix a P2471 code on a 2014 Chevrolet Silverado?
The cost can vary, but replacing the EGT sensor typically ranges from $100 to $300, including parts and labor, depending on your location and repair shop.
9. Can a faulty EGT sensor 4 cause other issues in my 2014 Chevrolet Silverado?
Yes, a faulty EGT sensor can lead to improper exhaust temperature readings, which may cause damage to the catalytic converter or diesel particulate filter over time.
10. Will clearing the P2471 code fix the issue on my 2014 Chevrolet Silverado?
Clearing the code will turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will likely reappear.
Discuss the causes and fixes for P2471 2014 Chevrolet Silverado OBDII Code
Code P2471 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.