P246E Code - Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4
Quick Answer
The P246E diagnostic trouble code (DTC) refers to an issue with the Exhaust Gas Temperature (EGT) Sensor Circuit for Bank 1 Sensor 4. Common causes include Faulty EGT sensor, Wiring or connector issues in the EGT sensor circuit, ECM software or programming issues. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P246E indicates Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4.
- Common causes
- Common causes include Faulty EGT sensor, Wiring or connector issues in the EGT sensor circuit, ECM software or programming issues.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P246E Description
The P246E diagnostic trouble code (DTC) refers to an issue with the Exhaust Gas Temperature (EGT) Sensor Circuit for Bank 1 Sensor 4. This sensor is responsible for monitoring the exhaust gas temperature in the exhaust system. The EGT sensor provides crucial data to the engine control module (ECM) to ensure optimal fuel combustion and emissions control. When this sensor circuit malfunctions, it can lead to a variety of performance issues and potentially cause long-term damage to the vehicle.
Common Causes of P246E
- Faulty EGT sensor
- Wiring or connector issues in the EGT sensor circuit
- ECM software or programming issues
- Exhaust system leaks or damage
- DPF regeneration failure
Symptoms of P246E
- Check Engine Light illuminated on the dashboard
- Reduced engine performance or power
- Increased fuel consumption
- Rough idling or engine misfires
- Increased emissions output
How to Fix P246E
- Begin by conducting a visual inspection of the EGT sensor, wiring, and connectors for any signs of damage or corrosion.
- Use a multimeter to test the EGT sensor's resistance and voltage output to determine if it is functioning correctly.
- If the EGT sensor is faulty, replace it with a new, OEM-quality sensor and ensure proper installation.
- Check and repair any damaged wiring or connectors in the EGT sensor circuit.
- Clear the DTC with a diagnostic scan tool and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P246E
The typical repair costs for addressing the P246E code can vary depending on the specific vehicle make and model, as well as the labor rates in your area. On average, the parts for an EGT sensor replacement can range from $100 to $300, while the labor costs may add another $100 to $200. Overall, the total repair cost for this issue could be in the range of $200 to $500. It's recommended to consult with local auto repair shops to get a more accurate estimate based on your vehicle's requirements. Labor rates can vary widely, so it's advisable to shop around for the best deal.
Need more information about the P246E code?
Need more information on how to fix the P246E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P246E code diagnosed by a professional: Find a repair shop in your area
Code P246E Information for Specific Makes
- P246E Chevrolet — Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4
- P246E Dodge — Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4
- P246E Ford — Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4
- P246E GMC — Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4
Frequently Asked Questions about P246E Code
1. What are common symptoms of OBDII code P246E?
- Common symptoms include decreased fuel efficiency, loss of engine power, and the illumination of the Check Engine Light.
2. What does OBDII code P246E indicate?
- OBDII code P246E indicates an issue with the Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4.
3. What are possible causes of code P246E?
- Possible causes of P246E include a faulty exhaust gas temperature sensor, damaged wiring or connectors, or issues with the sensor circuit.
4. How can I diagnose the cause of OBDII code P246E?
- Diagnose P246E by visually inspecting the sensor and its connections, testing the sensor for proper functionality, and checking for any damaged wiring.
5. How can I repair OBDII code P246E?
- Repair options for P246E may include replacing the exhaust gas temperature sensor, repairing or replacing damaged wiring, or addressing any issues with the sensor circuit.
6. Can I drive my vehicle with OBDII code P246E?
- It is not recommended to drive your vehicle with code P246E as it can lead to further damage and potentially affect the performance of your vehicle.
7. How urgent is it to address OBDII code P246E?
- It is important to address code P246E promptly to prevent any potential damage to the engine or emissions system.
8. Will resetting the Check Engine Light fix OBDII code P246E?
- Resetting the Check Engine Light may temporarily turn it off, but it will not fix the underlying issue causing code P246E.
9. Can a DIY enthusiast fix OBDII code P246E?
- Depending on the cause, a DIY enthusiast with the necessary tools and knowledge may be able to fix code P246E, especially if it involves sensor replacement or simple wiring repairs.
10. How can I prevent OBDII code P246E from recurring?
- To prevent code P246E from recurring, ensure regular maintenance of your vehicle, promptly address any related issues, and use quality parts when performing repairs.
Discuss the causes and fixes for P246E OBDII Code
Code P246E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.