P2466 Code - Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 3
Quick Answer
The P2466 diagnostic trouble code (DTC) refers to an issue with the Exhaust Gas Temperature (EGT) Sensor Circuit for Bank 2 Sensor 3 in a vehicle's exhaust system. Common causes include Faulty EGT Sensor: The EGT sensor itself may be malfunctioning, causing inaccurate readings or no signal at all, Wiring Issues: Damaged or corroded wiring connecting the EGT sensor to the ECM can disrupt the signal and trigger the P2466 code, Poor Electrical Connection: Loose or poor electrical connections between the sensor and the ECM can also lead to the code being triggered. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2466 indicates Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 3.
- Common causes
- Common causes include Faulty EGT Sensor: The EGT sensor itself may be malfunctioning, causing inaccurate readings or no signal at all, Wiring Issues: Damaged or corroded wiring connecting the EGT sensor to the ECM can disrupt the signal and trigger the P2466 code, Poor Electrical Connection: Loose or poor electrical connections between the sensor and the ECM can also lead to the code being triggered.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2466 Description
The P2466 diagnostic trouble code (DTC) refers to an issue with the Exhaust Gas Temperature (EGT) Sensor Circuit for Bank 2 Sensor 3 in a vehicle's exhaust system. This sensor is responsible for monitoring the exhaust gas temperature after it has passed through the catalytic converter. The EGT sensor provides crucial data to the engine control module (ECM) to optimize fuel efficiency, emissions, and overall engine performance.
Common Causes of P2466
- Faulty EGT Sensor: The EGT sensor itself may be malfunctioning, causing inaccurate readings or no signal at all.
- Wiring Issues: Damaged or corroded wiring connecting the EGT sensor to the ECM can disrupt the signal and trigger the P2466 code.
- Poor Electrical Connection: Loose or poor electrical connections between the sensor and the ECM can also lead to the code being triggered.
- Exhaust System Leak: A leak in the exhaust system near the EGT sensor can affect its operation and trigger the code.
- ECM Malfunction: In rare cases, a malfunction in the engine control module (ECM) may be the cause of the issue.
Symptoms of P2466
- Check Engine Light: The most common symptom associated with the P2466 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A faulty EGT sensor can cause the engine to run less efficiently, resulting in decreased fuel economy.
- Poor Performance: The vehicle may experience a reduction in overall performance, such as decreased power and acceleration.
- Rough Idling: A malfunctioning EGT sensor can also lead to rough idling or engine misfires.
- Increased Emissions: The vehicle may emit higher levels of harmful emissions due to improper monitoring of exhaust gas temperature.
How to Fix P2466
- Diagnose the Issue: Begin by using an OBD-II scanner to retrieve the specific code and confirm that it is indeed P2466 related to the EGT sensor circuit.
- Inspect Wiring and Connections: Check the wiring harness connecting the EGT sensor to the ECM for any signs of damage, corrosion, or loose connections.
- Test EGT Sensor: Test the EGT sensor itself to determine if it is faulty and needs replacement.
- Repair or Replace Components: Depending on the findings, repair any damaged wiring, replace the EGT sensor if necessary, and ensure all connections are secure.
- Clear Codes and Test Drive: Clear the DTC from the ECM memory, reset the Check Engine Light, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2466
The typical repair costs for addressing the P2466 code related to the Exhaust Gas Temperature Sensor Circuit can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. It's important to note that most auto repair shops charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops. To obtain a more accurate estimate, it's advisable to consult local rates for this repair.
Need more information about the P2466 code?
Need more information on how to fix the P2466 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2466 code diagnosed by a professional: Find a repair shop in your area
Code P2466 Information for Specific Makes
- P2466 Chevrolet — Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 3
- P2466 Dodge — Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 3
- P2466 Ford — Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 3
- P2466 GMC — Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 3
Frequently Asked Questions about P2466 Code
No Frequently Asked Questions about P2466 Code found.
Discuss the causes and fixes for P2466 OBDII Code
Code P2466 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.