Engine-CodesGMC – P2463 GMC

P2463 GMC Code - Diesel Particulate Filter Soot Accumulation

Quick Answer

The P2463 GMC code refers to Diesel Particulate Filter (DPF) Soot Accumulation. Common causes include Failure of the DPF regeneration system, Low-quality fuel leading to excess soot production, Short city driving cycles that do not allow for proper regeneration. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2463 GMC indicates Diesel Particulate Filter Soot Accumulation.
Common causes
Common causes include Failure of the DPF regeneration system, Low-quality fuel leading to excess soot production, Short city driving cycles that do not allow for proper regeneration.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2463 GMC Description

The P2463 GMC code refers to Diesel Particulate Filter (DPF) Soot Accumulation. The Diesel Particulate Filter is a critical component in modern diesel engines that helps reduce emissions by trapping and storing particulate matter, or soot, from the exhaust gases. Over time, the DPF can become clogged with soot, leading to reduced engine performance and increased emissions. When the soot accumulation reaches a certain level, the vehicle's onboard computer will trigger the P2463 code to alert the driver of the issue.

OBDII Code P2463 GMC - Diesel Particulate Filter Soot Accumulation
P2463 GMC Code - Diesel Particulate Filter Soot Accumulation

Common Causes of P2463 GMC

  1. Failure of the DPF regeneration system
  2. Low-quality fuel leading to excess soot production
  3. Short city driving cycles that do not allow for proper regeneration
  4. Faulty sensors monitoring DPF performance
  5. Engine mechanical issues affecting exhaust flow

Symptoms of P2463 GMC

  1. Reduced engine power and acceleration
  2. Decreased fuel efficiency
  3. Increased exhaust emissions
  4. Vehicle going into limp mode
  5. Illumination of the check engine light

How to Fix P2463 GMC

  1. Perform a forced regeneration of the DPF to clear out excess soot
  2. Inspect and replace any faulty sensors related to the DPF system
  3. Check for any mechanical issues that may be affecting exhaust flow
  4. Use a professional DPF cleaning service or replace the DPF if necessary
  5. Ensure proper fuel quality and driving habits to prevent future soot accumulation

Cost to Fix P2463 GMC

The cost of repairing a P2463 GMC code can vary depending on the extent of the issue and the specific repairs needed. In general, the cost of replacing a Diesel Particulate Filter can range from $1000 to $3000, including parts and labor. However, additional costs may be incurred if other components of the emissions system need to be replaced or repaired. It's important to consult with a qualified mechanic or dealership to get an accurate estimate based on your vehicle's make and model, as well as the severity of the issue. Diagnostic time and labor rates at auto repair shops can vary, typically ranging between $80 and $150 per hour.

Tech Notes for P2463 GMC

To resolve this, you will have to change the Diesel Particulate Filter and reset the code with an OBDII scanner.



There is a Factory Service Bulletin for the following GMC models:

2007-2009 GMC TopKick

2007-2018 GMC Sierra

2007-2020 GMC Savana

2016-2020 GMC Canyon

2018-2019 GMC Terrain

2019 GMC Sierra Limited, Sierra 1500 (New Model)

2019 GMC Sierra 2500/3500

2020 GMC Sierra 1500

2020 GMC Sierra 2500HD/3500HD

GMC Factory Service Bulletin OBDII Code P2463



The Diesel Particulate Filter (DPF) will clean itself as part of normal operation. Several factors including fuel consumed, hours of engine operation, and miles are driven are monitored by the Engine Control Module (ECM). The self-cleaning occurs approximately once per tank of fuel. Under certain driving conditions, such as extended idling, stop-and-go traffic, etc., the DPF cannot clean itself.

Need more information about the P2463 GMC code?

Need more information on how to fix the P2463 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2463 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2463 GMC Code

No Frequently Asked Questions about P2463 GMC Code found.

Discuss the causes and fixes for P2463 GMC OBDII Code

Code P2463 GMC comments

No comments found for this page.