P2460 Dodge Code - Diesel Particulate Filter Pressure Sensor 'B' Circuit Low
Quick Answer
The P2460 diagnostic trouble code (DTC) for Dodge vehicles specifically points to an issue with the Diesel Particulate Filter (DPF) Pressure Sensor 'B' Circuit registering a low voltage. Common causes include Faulty DPF pressure sensor, Damaged wiring or connections, ECM software issues. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2460 Dodge indicates Diesel Particulate Filter Pressure Sensor 'B' Circuit Low.
- Common causes
- Common causes include Faulty DPF pressure sensor, Damaged wiring or connections, ECM software issues.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2460 Dodge Description
The P2460 diagnostic trouble code (DTC) for Dodge vehicles specifically points to an issue with the Diesel Particulate Filter (DPF) Pressure Sensor 'B' Circuit registering a low voltage. The DPF is a crucial component in modern diesel engines, designed to trap and remove harmful particulate matter from the exhaust gases before they are released into the environment. The pressure sensor is responsible for monitoring the pressure within the DPF to ensure optimal performance and efficiency.
Common Causes of P2460 Dodge
- Faulty DPF pressure sensor
- Damaged wiring or connections
- ECM software issues
- Clogged DPF filter
- Exhaust system leaks or damage
Symptoms of P2460 Dodge
- Illumination of the check engine light
- Reduced engine performance or power
- Increased fuel consumption
- Difficulty starting the engine
- Excessive exhaust smoke or emissions
How to Fix P2460 Dodge
- Use an OBD-II scanner to confirm the P2460 code and diagnose the specific issue with the DPF pressure sensor 'B' circuit.
- Inspect the sensor, wiring, and connections for any visible damage or corrosion. Replace any faulty components.
- Check the DPF filter for clogging or damage. Clean or replace the filter if necessary.
- Reset the ECM to clear the code and monitor the system for any recurring issues.
- Test drive the vehicle to ensure that the repair has resolved the problem and the check engine light stays off.
Cost to Fix P2460 Dodge
The cost of repairing a P2460 DTC can vary depending on the specific cause of the issue and the labor rates in your area. Typically, replacing a faulty DPF pressure sensor can range from $150 to $300, while addressing wiring or connection problems may cost between $100 and $200. If the DPF filter needs to be cleaned or replaced, additional costs can range from $200 to $800. Overall, the total repair cost for this issue could range from $300 to $1000, including parts and labor. Keep in mind that these are rough estimates, and actual costs may vary based on the vehicle's make and model, as well as the mechanic's rates. It's recommended to consult with a professional technician for a more accurate assessment.
Need more information about the P2460 Dodge code?
Need more information on how to fix the P2460 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2460 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2460 Dodge Code
1. What does the OBDII code P2460 mean on a Dodge vehicle?
P2460 indicates that the Diesel Particulate Filter (DPF) Pressure Sensor "B" circuit is reporting a low voltage or signal, which may affect the performance of the DPF system.
2. What are the common symptoms of code P2460 in a Dodge?
Symptoms may include a check engine light, poor engine performance, reduced fuel efficiency, and the vehicle entering limp mode.
3. What causes the P2460 code to trigger in a Dodge?
Common causes include a faulty DPF pressure sensor, wiring or connector issues, a clogged or damaged DPF, or a malfunctioning ECM.
4. Can a dirty Diesel Particulate Filter cause the P2460 code?
Yes, a clogged or restricted DPF can cause abnormal pressure readings, which may trigger the P2460 code.
5. How do you diagnose the P2460 code in a Dodge?
Diagnosis involves checking the DPF pressure sensor, inspecting the wiring and connectors for damage or corrosion, and testing the DPF for blockages or damage.
6. Can you drive with a P2460 code on a Dodge?
Driving with this code is not recommended, as it can lead to engine performance issues and potential damage to the DPF or other components.
7. How can a P2460 code be fixed in a Dodge?
Repairs may include replacing the DPF pressure sensor, repairing damaged wiring or connectors, cleaning or replacing the DPF, or updating the ECM software.
8. How much does it cost to fix the P2460 code on a Dodge?
Repair costs vary but typically range from $100 to $500, depending on the specific issue and whether the DPF needs replacement.
9. Can a software update resolve the P2460 code on a Dodge?
In some cases, an ECM software update may resolve the issue if the code is caused by incorrect sensor calibration or programming.
10. How can the P2460 code be prevented in the future?
Regular maintenance, such as using the correct fuel, ensuring proper driving habits to allow for DPF regeneration, and addressing sensor or wiring issues promptly, can help prevent the P2460 code.
Discuss the causes and fixes for P2460 Dodge OBDII Code
Code P2460 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.