P2437 Code - Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 2
Quick Answer
The P2437 diagnostic trouble code (DTC) refers to a fault in the Secondary Air Injection System Air Flow/Pressure Sensor Circuit on Bank 2 of the vehicle. Common causes include Faulty Air Flow/Pressure Sensor: The sensor itself could be malfunctioning, providing incorrect readings to the vehicle's computer, Wiring Issues: Damage or corrosion in the wiring harness connected to the sensor can cause poor electrical connections and lead to the code, Vacuum Leaks: Any leaks in the vacuum system that affects the air flow/pressure readings can trigger the P2437 code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2437 indicates Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 2.
- Common causes
- Common causes include Faulty Air Flow/Pressure Sensor: The sensor itself could be malfunctioning, providing incorrect readings to the vehicle's computer, Wiring Issues: Damage or corrosion in the wiring harness connected to the sensor can cause poor electrical connections and lead to the code, Vacuum Leaks: Any leaks in the vacuum system that affects the air flow/pressure readings can trigger the P2437 code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2437 Description
The P2437 diagnostic trouble code (DTC) refers to a fault in the Secondary Air Injection System Air Flow/Pressure Sensor Circuit on Bank 2 of the vehicle. This system is responsible for reducing harmful emissions by injecting fresh air into the exhaust stream during cold start conditions to help with the combustion process. The air flow/pressure sensor in this system measures the flow of air and pressure levels to ensure proper operation.
Common Causes of P2437
- Faulty Air Flow/Pressure Sensor: The sensor itself could be malfunctioning, providing incorrect readings to the vehicle's computer.
- Wiring Issues: Damage or corrosion in the wiring harness connected to the sensor can cause poor electrical connections and lead to the code.
- Vacuum Leaks: Any leaks in the vacuum system that affects the air flow/pressure readings can trigger the P2437 code.
- Clogged Air Filter: A clogged air filter can restrict the flow of air to the sensor, causing it to detect lower readings.
- Exhaust System Blockage: Blockages in the exhaust system can disrupt the flow of air and pressure levels, leading to sensor errors.
Symptoms of P2437
- Check Engine Light: The most common symptom associated with the P2437 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Rough Idle: The engine may experience a rough idle or hesitation during acceleration due to the improper air flow/pressure readings.
- Decreased Fuel Efficiency: A decrease in fuel efficiency may be noticed as a result of the faulty sensor affecting the combustion process.
- Increased Emissions: The vehicle may fail emissions tests or emit higher levels of pollutants due to the improper functioning of the air flow/pressure sensor.
How to Fix P2437
- Diagnose the Issue: Use a diagnostic scanner to retrieve the specific code and pinpoint the exact cause of the fault.
- Inspect Wiring and Connections: Check the wiring harness and connections to the air flow/pressure sensor for any damage or corrosion. Repair or replace as needed.
- Replace Sensor: If the sensor is found to be faulty, replace it with a new, OEM-quality sensor to ensure proper operation.
- Clear Codes: After completing the repair, clear the codes and test drive the vehicle to ensure the issue has been resolved.
- Perform Emissions Test: If necessary, perform an emissions test to verify that the vehicle is now compliant with emissions regulations.
Cost to Fix P2437
The cost of repairing the P2437 code can vary depending on the extent of the issue and the specific vehicle make and model. Typically, the cost of replacing the air flow/pressure sensor can range from $200 to $400, including parts and labor. Additional costs for diagnostic testing, wiring repairs, or other necessary parts may increase the total repair bill. It is advisable to consult with a trusted mechanic or repair shop to receive an accurate cost estimate based on your vehicle's specific needs and any additional repairs that may be required.
Need more information about the P2437 code?
Need more information on how to fix the P2437 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2437 code diagnosed by a professional: Find a repair shop in your area
Code P2437 Information for Specific Makes
- P2437 Buick — Secondary Air Injection System Pressure Sensor Circuit Low Voltage Bank 2
- P2437 Cadillac — Secondary Air Injection System Pressure Sensor Circuit Low Voltage Bank 2
- P2437 Chevrolet — Secondary Air Injection System Pressure Sensor Circuit Low Voltage Bank 2
- P2437 Dodge — Secondary Air Injection System Air Flow/Pressure Sensor Circuit Low Bank 2
- P2437 GMC — Secondary Air Injection System Pressure Sensor Circuit Low Voltage Bank 2
Frequently Asked Questions about P2437 Code
No Frequently Asked Questions about P2437 Code found.
Discuss the causes and fixes for P2437 OBDII Code
Code P2437 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.