P2428 Ford Code - Exhaust Gas Temperature Too High Bank 1
Quick Answer
The P2428 Ford diagnostic trouble code (DTC) indicates that the exhaust gas temperature in bank 1 is too high. Common causes include Malfunctioning exhaust gas temperature sensor, Clogged diesel particulate filter, Faulty exhaust gas recirculation system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2428 Ford indicates Exhaust Gas Temperature Too High Bank 1.
- Common causes
- Common causes include Malfunctioning exhaust gas temperature sensor, Clogged diesel particulate filter, Faulty exhaust gas recirculation system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2428 Ford Description
The P2428 Ford diagnostic trouble code (DTC) indicates that the exhaust gas temperature in bank 1 is too high. This code is typically found in vehicles with diesel engines that are equipped with a diesel particulate filter (DPF) system. The DPF is designed to capture and store soot particles from the exhaust to reduce emissions. When the exhaust gas temperature becomes too high, it can lead to issues with the DPF system, potentially causing damage to the filter and affecting the vehicle's performance.
Common Causes of P2428 Ford
- Malfunctioning exhaust gas temperature sensor
- Clogged diesel particulate filter
- Faulty exhaust gas recirculation system
- Restricted exhaust system
- Engine running too rich
Symptoms of P2428 Ford
- Decreased fuel efficiency
- Reduced engine power
- Illumination of the check engine light
- Increased exhaust emissions
- Engine overheating
How to Fix P2428 Ford
- Check and replace the exhaust gas temperature sensor if faulty.
- Inspect and clean or replace the diesel particulate filter.
- Check and repair any issues with the exhaust gas recirculation system.
- Inspect and clear any restrictions in the exhaust system.
- Address any engine running too rich issues by checking the fuel system and adjusting as necessary.
Cost to Fix P2428 Ford
The cost of repairing a P2428 Ford code can vary depending on the specific cause of the issue and the extent of the repair needed. In general, the cost of parts for this repair can range from $100 to $500, with labor costs adding an additional $100 to $300. This brings the total repair cost to approximately $200 to $800. It's important to note that these are rough estimates and actual costs may vary based on factors such as location, vehicle make and model, and labor rates. It's recommended to consult a professional mechanic for a more accurate cost estimate.
Need more information about the P2428 Ford code?
Need more information on how to fix the P2428 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2428 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2428 Ford Code
What does the OBDII code P2428 mean for Ford vehicles?
The P2428 code indicates that the exhaust gas temperature (EGT) is too high in bank 1, which can lead to engine performance issues and potential damage if not addressed.
What are the common symptoms of the P2428 code?
Common symptoms include illuminated check engine light, reduced engine performance, increased fuel consumption, and potential overheating of the engine.
What might cause the P2428 code to trigger?
Possible causes include a faulty EGT sensor, issues with the exhaust system such as blockages or leaks, problems with the fuel system, or a malfunctioning engine control module (ECM).
How can I diagnose the P2428 code?
To diagnose the P2428 code, you should start with a visual inspection of the exhaust system, check for any exhaust leaks, test the EGT sensor for proper operation, and scan the vehicle's computer for other related codes.
What repairs might be necessary for code P2428?
Repairs may include replacing a faulty EGT sensor, fixing exhaust leaks, cleaning or replacing clogged exhaust components, and reprogramming or replacing the ECM if it is malfunctioning.
Is it safe to drive with the P2428 code?
While it may be possible to drive with the P2428 code, it is not recommended as it can lead to further engine damage or performance issues. It's best to address the issue promptly.
How can I prevent the P2428 code from occurring?
Regular maintenance, such as checking and replacing exhaust components, ensuring proper fuel quality, and using the correct engine oil, can help prevent the occurrence of the P2428 code.
What should I do if I clear the P2428 code but it returns?
If the code returns after clearing, further diagnostics are needed to identify the underlying issue. Consider seeking professional assistance to accurately diagnose and repair the problem.
Can the P2428 code affect my vehicle’s emissions?
Yes, the P2428 code can affect emissions by causing the engine to run inefficiently, which may lead to increased emissions output and potential failure in emissions testing.
Discuss the causes and fixes for P2428 Ford OBDII Code
Code P2428 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.