P2419 Code - Evaporative Emission System Switching Valve Control Circuit Low
Quick Answer
The P2419 code indicates a problem with the evaporative emission system switching valve control circuit being lower than the expected voltage range. Common causes include Faulty Evaporative Emission System Switching Valve: The valve itself may be malfunctioning, causing the control circuit to register a low voltage, Wiring Issues: Damage or corrosion to the wiring connected to the switching valve control circuit can disrupt the voltage flow, PCM (Powertrain Control Module) Failure: A problem with the PCM, which controls the evaporative emission system, can trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2419 indicates Evaporative Emission System Switching Valve Control Circuit Low.
- Common causes
- Common causes include Faulty Evaporative Emission System Switching Valve: The valve itself may be malfunctioning, causing the control circuit to register a low voltage, Wiring Issues: Damage or corrosion to the wiring connected to the switching valve control circuit can disrupt the voltage flow, PCM (Powertrain Control Module) Failure: A problem with the PCM, which controls the evaporative emission system, can trigger this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2419 Description
The P2419 code indicates a problem with the evaporative emission system switching valve control circuit being lower than the expected voltage range. This system is responsible for controlling the flow of fuel vapors from the gas tank to the engine for combustion, reducing emissions. When this valve control circuit is low, it can lead to issues with the vehicle's emissions control, potentially causing it to fail an emissions test. It can also impact the overall performance and fuel efficiency of the vehicle.
Common Causes of P2419
- Faulty Evaporative Emission System Switching Valve: The valve itself may be malfunctioning, causing the control circuit to register a low voltage.
- Wiring Issues: Damage or corrosion to the wiring connected to the switching valve control circuit can disrupt the voltage flow.
- PCM (Powertrain Control Module) Failure: A problem with the PCM, which controls the evaporative emission system, can trigger this code.
- Vacuum Leaks: Any leaks in the vacuum lines connected to the evaporative emission system can affect the valve's performance and trigger the code.
Symptoms of P2419
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Decreased Fuel Efficiency: A faulty evaporative emission system switching valve control circuit can lead to decreased fuel efficiency as the engine may not be operating optimally.
- Rough Idle: The engine may experience rough idling or hesitation during acceleration due to the improper flow of fuel vapors.
- Strong Fuel Odor: There may be a noticeable strong smell of fuel inside and/or outside of the vehicle.
- Failed Emissions Test: If the issue is not addressed, it can result in the vehicle failing an emissions test.
How to Fix P2419
- Diagnostic: Use a scan tool to retrieve the trouble code and perform a thorough inspection of the evaporative emission system components.
- Repair/Replace Switching Valve: If the valve is faulty, it will need to be repaired or replaced to ensure proper functioning.
- Check Wiring: Inspect the wiring connected to the switching valve control circuit for any damage or corrosion, repairing or replacing as needed.
- Address Vacuum Leaks: Check for any vacuum leaks in the system and repair them to prevent further issues.
- Clear Codes: Once the issue is resolved, clear the trouble codes and perform a test drive to ensure the problem has been fixed.
Cost to Fix P2419
The cost of repairing a P2419 code can vary depending on the specific cause of the issue. On average, the repair cost for this type of problem can range from $100 to $500, including parts and labor. However, it's important to note that labor rates at auto repair shops can vary widely, so it's recommended to obtain quotes from local shops to get a more accurate estimate.
Need more information about the P2419 code?
Need more information on how to fix the P2419 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2419 code diagnosed by a professional: Find a repair shop in your area
Code P2419 Information for Specific Makes
- P2419 BMW — Evaporative Emission System Switching Valve Control Circuit Low
- P2419 Dodge — Evaporative Emission System Switching Valve Control Circuit Low
- P2419 Lexus — Evaporative Emission System Switching Valve Control Circuit Low
- P2419 Scion — Evaporative Emission System Switching Valve Control Circuit Low
- P2419 Toyota — Evaporative Emission System Switching Valve Control Circuit Low
- P2419 Volvo — EVAP System Switching Valve Control Circuit Low
Frequently Asked Questions about P2419 Code
No Frequently Asked Questions about P2419 Code found.
Discuss the causes and fixes for P2419 OBDII Code
-
You probably have a problem with Leak Diagnostic Unit Valve.
P2419 Volvo - Leak Diagnostic Unit Valve Signal Too Low
Read more: https://www.autocodes.com/p24...
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.