P240C Code - Evaporative Emission System Leak Detection Pump Heater Control Circuit High
Quick Answer
The P240C diagnostic trouble code (DTC) refers to an issue in the evaporative emission system leak detection pump heater control circuit, specifically indicating a high voltage condition. Common causes include Faulty Leak Detection Pump Heater: A malfunction in the leak detection pump heater itself can cause the control circuit to register a high voltage condition, Wiring Issues: Damaged or corroded wiring connecting the LDP heater to the control module can disrupt the voltage signal, Faulty Control Module: A malfunctioning control module that regulates the LDP heater's operation can lead to a high voltage condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P240C indicates Evaporative Emission System Leak Detection Pump Heater Control Circuit High.
- Common causes
- Common causes include Faulty Leak Detection Pump Heater: A malfunction in the leak detection pump heater itself can cause the control circuit to register a high voltage condition, Wiring Issues: Damaged or corroded wiring connecting the LDP heater to the control module can disrupt the voltage signal, Faulty Control Module: A malfunctioning control module that regulates the LDP heater's operation can lead to a high voltage condition.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P240C Description
The P240C diagnostic trouble code (DTC) refers to an issue in the evaporative emission system leak detection pump heater control circuit, specifically indicating a high voltage condition. This system is responsible for detecting leaks in the vehicle's fuel system, ensuring that harmful vapors are not released into the atmosphere. The leak detection pump (LDP) heater is essential for the proper functioning of the evaporative emission system, as it helps maintain optimal operating temperatures to enable accurate leak detection.
Common Causes of P240C
- Faulty Leak Detection Pump Heater: A malfunction in the leak detection pump heater itself can cause the control circuit to register a high voltage condition.
- Wiring Issues: Damaged or corroded wiring connecting the LDP heater to the control module can disrupt the voltage signal.
- Faulty Control Module: A malfunctioning control module that regulates the LDP heater's operation can lead to a high voltage condition.
- Electrical Short: An electrical short in the circuit can cause the voltage to spike, triggering the P240C code.
Symptoms of P240C
- Check Engine Light: The most common symptom associated with the P240C code is the illumination of the check engine light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A high voltage condition in the evaporative emission system can lead to increased fuel consumption due to improper leak detection.
- Rough Idle: The vehicle may experience rough idling or hesitation during acceleration as a result of the P240C code.
- Failed Emissions Test: If the evaporative emission system is not functioning correctly, the vehicle may fail emissions testing.
How to Fix P240C
- Diagnostic Scan: Begin by using an OBD-II scanner to retrieve the specific DTC, confirming the P240C code related to the evaporative emission system leak detection pump heater control circuit high.
- Inspect Wiring: Check the wiring harness for any signs of damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
- Test Leak Detection Pump Heater: Verify the functionality of the leak detection pump heater by testing its resistance and operation. Replace the heater if it is found to be faulty.
- Check Control Module: Inspect the control module for any signs of damage or malfunction. If necessary, replace the control module to address the high voltage condition.
- Clear Codes: Once the repairs are completed, clear the DTC using the OBD-II scanner to reset the check engine light and monitor the system for any recurring issues.
Cost to Fix P240C
The cost of repairing the P240C code can vary depending on the extent of the issue and the specific components that need to be replaced. On average, the parts required for this repair, such as a new leak detection pump heater or control module, can range from $100 to $300. Labor costs at an auto repair shop typically range from $80 to $150 per hour, with the total repair bill potentially amounting to several hundred dollars. It's recommended to obtain quotes from local auto repair shops to get a more accurate estimate based on your vehicle's make and model, as well as the severity of the issue.
Need more information about the P240C code?
Need more information on how to fix the P240C code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P240C code diagnosed by a professional: Find a repair shop in your area
Code P240C Information for Specific Makes
- P240C BMW — Evaporative Emission System Leak Detection Pump Heater Control Circuit High
Frequently Asked Questions about P240C Code
No Frequently Asked Questions about P240C Code found.
Discuss the causes and fixes for P240C OBDII Code
Code P240C comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.