P2403 Dodge Code - Evaporative Emission System Leak Detection Pump Sense Circuit/Open
Quick Answer
The P2403 diagnostic trouble code for Dodge vehicles refers to an issue with the evaporative emission system leak detection pump sense circuit being open. Common causes include Faulty Leak Detection Pump: The most common cause of the P2403 code is a malfunctioning leak detection pump that is unable to detect leaks in the evaporative emission system, Open or Shorted Circuit: A break or short in the LDP sense circuit can prevent the pump from functioning properly, Wiring Issues: Damaged or corroded wiring connecting the LDP to the vehicle's electrical system can also trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2403 Dodge indicates Evaporative Emission System Leak Detection Pump Sense Circuit/Open.
- Common causes
- Common causes include Faulty Leak Detection Pump: The most common cause of the P2403 code is a malfunctioning leak detection pump that is unable to detect leaks in the evaporative emission system, Open or Shorted Circuit: A break or short in the LDP sense circuit can prevent the pump from functioning properly, Wiring Issues: Damaged or corroded wiring connecting the LDP to the vehicle's electrical system can also trigger this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2403 Dodge Description
The P2403 diagnostic trouble code for Dodge vehicles refers to an issue with the evaporative emission system leak detection pump sense circuit being open. The evaporative emission system is designed to capture and store fuel vapors from the fuel tank to prevent them from being released into the atmosphere. The leak detection pump (LDP) is a key component of this system, responsible for monitoring the system for leaks by pressurizing it and checking for any drop in pressure.
Common Causes of P2403 Dodge
- Faulty Leak Detection Pump: The most common cause of the P2403 code is a malfunctioning leak detection pump that is unable to detect leaks in the evaporative emission system.
- Open or Shorted Circuit: A break or short in the LDP sense circuit can prevent the pump from functioning properly.
- Wiring Issues: Damaged or corroded wiring connecting the LDP to the vehicle's electrical system can also trigger this code.
- Faulty Evaporative Emission System Components: Issues with other components of the evaporative emission system, such as the purge valve or charcoal canister, can also lead to the P2403 code.
Symptoms of P2403 Dodge
- Check Engine Light: The most common symptom associated with the P2403 code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Fuel Efficiency: A malfunctioning evaporative emission system can lead to decreased fuel efficiency as fuel vapors are not being properly captured and recycled.
- Failed Emissions Test: If the issue is not resolved, it can result in a failed emissions test due to increased emissions from the vehicle.
- Strong Fuel Odor: A noticeable fuel odor inside or outside the vehicle can be a sign of a leak in the evaporative emission system.
How to Fix P2403 Dodge
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and pinpoint the exact cause of the problem.
- Inspect Wiring and Connections: Check the wiring and connections related to the LDP to ensure that there are no breaks, shorts, or corrosion.
- Test the Leak Detection Pump: Test the functionality of the LDP to determine if it is working properly or needs to be replaced.
- Replace Faulty Components: If the issue is with the LDP or other components of the evaporative emission system, replace them as needed.
- Clear the Code: Once the repairs are completed, clear the trouble code from the vehicle's computer system to turn off the check engine light.
Cost to Fix P2403 Dodge
The typical repair costs for addressing a P2403 code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, the cost of replacing a leak detection pump can range from $200 to $400, including parts and labor. However, additional costs may be incurred if other components of the evaporative emission system need to be replaced or if there are wiring issues that need to be addressed. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle.
Need more information about the P2403 Dodge code?
Need more information on how to fix the P2403 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2403 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2403 Dodge Code
What does the OBDII code P2403 mean for a Dodge vehicle?
P2403 indicates an issue with the Evaporative Emission System Leak Detection Pump Sense Circuit, specifically an open or malfunction in the circuit.
What are the common symptoms of P2403 in a Dodge?
Symptoms include the check engine light turning on, possible fuel smell near the vehicle, and failed emissions tests. Performance issues are uncommon.
What causes the P2403 code to appear?
Common causes include a faulty leak detection pump, damaged or corroded wiring, a failed control module, or loose/defective electrical connections.
Can I drive my Dodge with the P2403 code active?
While the vehicle may still be drivable, it's best to address the issue promptly to prevent further damage and ensure emissions compliance.
How is the P2403 code diagnosed in a Dodge?
A technician typically uses an OBDII scanner, inspects the leak detection pump and its wiring for damage, and checks voltage and resistance in the circuit.
What repairs can fix the P2403 code?
Repairs may include replacing the leak detection pump, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming the control module.
How much does it cost to fix a P2403 code?
The repair cost depends on the issue but typically ranges from $100 to $400, including parts and labor.
What tools are needed to troubleshoot P2403?
You may need an OBDII scanner, a multimeter for checking electrical continuity, and basic hand tools for inspecting and replacing components.
Can a loose gas cap cause P2403?
No, a loose gas cap is more likely to trigger codes like P0455 or P0442. P2403 is specifically related to the leak detection pump circuit.
Will clearing the P2403 code solve the problem?
Clearing the code may temporarily turn off the check engine light, but the issue will return unless the underlying problem is properly fixed.
Discuss the causes and fixes for P2403 Dodge OBDII Code
Code P2403 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.