P2402 Dodge Code - Evaporative Emission System Leak Detection Pump Control Circuit High
Quick Answer
The P2402 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the Evaporative Emission System Leak Detection Pump Control Circuit being too high. Common causes include Faulty Leak Detection Pump: The LDP itself may be faulty, causing the control circuit to register a high voltage, Wiring Issues: Damaged or corroded wiring connected to the LDP can lead to electrical problems and trigger the code, Faulty Evaporative Emission Control Module: Issues with the control module responsible for regulating the evaporative emission system can also trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2402 Dodge indicates Evaporative Emission System Leak Detection Pump Control Circuit High.
- Common causes
- Common causes include Faulty Leak Detection Pump: The LDP itself may be faulty, causing the control circuit to register a high voltage, Wiring Issues: Damaged or corroded wiring connected to the LDP can lead to electrical problems and trigger the code, Faulty Evaporative Emission Control Module: Issues with the control module responsible for regulating the evaporative emission system can also trigger this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2402 Dodge Description
The P2402 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the Evaporative Emission System Leak Detection Pump Control Circuit being too high. The evaporative emission system in a vehicle is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The Leak Detection Pump (LDP) is a crucial component of this system, as it helps to detect leaks in the system by drawing a vacuum and monitoring pressure levels.
Common Causes of P2402 Dodge
- Faulty Leak Detection Pump: The LDP itself may be faulty, causing the control circuit to register a high voltage.
- Wiring Issues: Damaged or corroded wiring connected to the LDP can lead to electrical problems and trigger the code.
- Faulty Evaporative Emission Control Module: Issues with the control module responsible for regulating the evaporative emission system can also trigger this code.
- Vacuum Leaks: Any leaks in the vacuum lines connected to the LDP can disrupt its functioning and lead to the code being triggered.
Symptoms of P2402 Dodge
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Rough Idling: The engine may experience rough idling or stalling due to the improper functioning of the evaporative emission system.
- Decreased Fuel Efficiency: A malfunctioning evaporative emission system can lead to decreased fuel efficiency as fuel vapors escape without being properly captured.
- Failed Emissions Test: If the vehicle is subjected to an emissions test, it may fail to meet the required standards due to increased emissions.
How to Fix P2402 Dodge
- Diagnose the Issue: Use an OBD-II scanner to read the trouble codes and perform a thorough inspection of the evaporative emission system to pinpoint the source of the problem.
- Replace the Leak Detection Pump: If the LDP is found to be faulty, it will need to be replaced with a new one to ensure proper functioning of the system.
- Repair Wiring: Address any damaged or corroded wiring connected to the LDP to restore proper electrical connections.
- Check and Replace Control Module: Inspect the evaporative emission control module for any faults and replace it if necessary to ensure proper system operation.
- Clear Codes and Test: After completing the repairs, clear the trouble codes from the vehicle's computer and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P2402 Dodge
The cost of repairing a P2402 DTC for a Dodge vehicle can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay anywhere from $200 to $500 for parts and labor to address this problem. Keep in mind that additional diagnostic time may be needed to accurately diagnose the issue, and labor rates at auto repair shops can range from $80 to $150 per hour. It's recommended to consult with a certified mechanic or dealership for a more accurate estimate based on your vehicle's make and model.
Need more information about the P2402 Dodge code?
Need more information on how to fix the P2402 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2402 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2402 Dodge Code
What does the OBDII code P2402 mean on a Dodge vehicle?
1. The P2402 code indicates that the evaporative emission system's leak detection pump control circuit has a high voltage issue, which may affect the system's ability to detect fuel vapor leaks. 2.
What are the common symptoms of the P2402 code in a Dodge?
Symptoms may include an illuminated check engine light, a failed emissions test, and a possible fuel odor around the vehicle. 3.
What causes the P2402 code to appear on a Dodge?
Common causes include a faulty leak detection pump, damaged wiring or connectors in the circuit, a malfunctioning EVAP system control module, or electrical issues such as a short or open circuit. 4.
Can I drive my Dodge with the P2402 code?
Yes, you can drive with this code, but it is not recommended for an extended period as it may lead to increased emissions and potentially other system issues. 5.
How is the P2402 code diagnosed on a Dodge?
A mechanic will use a scan tool to confirm the code, inspect EVAP system wiring and connectors, check the leak detection pump, and perform voltage and continuity tests on the circuit. 6.
How do I fix the P2402 code on my Dodge?
Repairs may include replacing the leak detection pump, repairing or replacing damaged wiring or connectors, or addressing issues with the EVAP system control module. 7.
How much does it cost to fix the P2402 code on a Dodge?
Repair costs can range from $100 to $400, depending on whether the issue is with wiring, the leak detection pump, or other components. 8.
Can a loose gas cap cause the P2402 code on a Dodge?
A loose gas cap typically triggers a different EVAP-related code, but it’s worth ensuring the gas cap is tight and in good condition as part of the diagnostic process. 9.
Will clearing the P2402 code with a scan tool fix the issue?
Clearing the code will reset the check engine light temporarily, but the underlying issue must be repaired to prevent the code from returning. 10.
How can I prevent the P2402 code from occurring on my Dodge?
Regular maintenance of the EVAP system, inspecting wiring and connectors for damage, and addressing any check engine light promptly can help prevent this code.
Discuss the causes and fixes for P2402 Dodge OBDII Code
Code P2402 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.