P2402 2013 Toyota RAV4 Code - Evaporative Emission Leak Detection Pump Stuck ON
Quick Answer
The P2402 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 indicates that the Evaporative Emission Leak Detection Pump is stuck ON. Common causes include Faulty Leak Detection Pump: The most common cause of the P2402 code is a malfunctioning Evaporative Emission Leak Detection Pump that is stuck in the ON position, Wiring or Electrical Issues: A damaged or corroded wiring harness, connectors, or electrical components related to the LDP can also trigger this code, Vacuum Leaks: Any leaks in the vacuum lines or hoses connected to the evaporative emissions system can disrupt its operation and lead to the P2402 code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2402 2013 Toyota RAV4 indicates Evaporative Emission Leak Detection Pump Stuck ON.
- Common causes
- Common causes include Faulty Leak Detection Pump: The most common cause of the P2402 code is a malfunctioning Evaporative Emission Leak Detection Pump that is stuck in the ON position, Wiring or Electrical Issues: A damaged or corroded wiring harness, connectors, or electrical components related to the LDP can also trigger this code, Vacuum Leaks: Any leaks in the vacuum lines or hoses connected to the evaporative emissions system can disrupt its operation and lead to the P2402 code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2402 2013 Toyota RAV4 Description
The P2402 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 indicates that the Evaporative Emission Leak Detection Pump is stuck ON. This system is a crucial component of the vehicle's evaporative emissions control system, which is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from being released into the atmosphere. The Leak Detection Pump (LDP) is designed to detect leaks in the evaporative emissions system by pressurizing the system and monitoring for leaks.
Common Causes of P2402 2013 Toyota RAV4
- Faulty Leak Detection Pump: The most common cause of the P2402 code is a malfunctioning Evaporative Emission Leak Detection Pump that is stuck in the ON position.
- Wiring or Electrical Issues: A damaged or corroded wiring harness, connectors, or electrical components related to the LDP can also trigger this code.
- Vacuum Leaks: Any leaks in the vacuum lines or hoses connected to the evaporative emissions system can disrupt its operation and lead to the P2402 code.
- EVAP System Blockage: Blockages in the EVAP system, such as a clogged charcoal canister or vent valve, can prevent the system from functioning properly and trigger the code.
- Software or Calibration Issues: In some cases, software glitches or calibration errors in the vehicle's onboard computer system can also cause the P2402 code to be stored.
Symptoms of P2402 2013 Toyota RAV4
- Check Engine Light: The most common symptom associated with the P2402 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A malfunctioning evaporative emissions system can lead to increased fuel consumption due to the inefficient management of fuel vapors.
- Rough Idle: The engine may experience rough idling or hesitation when the Leak Detection Pump is stuck ON.
- Failed Emissions Test: If the vehicle is subjected to an emissions test, it may fail to meet the required standards due to increased emissions caused by the malfunctioning system.
How to Fix P2402 2013 Toyota RAV4
- Diagnose the Issue: Begin by using a diagnostic scan tool to retrieve the trouble codes and pinpoint the specific cause of the P2402 code.
- Inspect Wiring and Connections: Check the wiring harness, connectors, and electrical components related to the LDP for any damage or corrosion. Repair or replace any faulty parts as needed.
- Test the Leak Detection Pump: Test the functionality of the Evaporative Emission Leak Detection Pump to determine if it is stuck ON. Replace the pump if it fails the test.
- Check for Vacuum Leaks: Inspect the vacuum lines and hoses for any leaks or damage. Repair or replace any affected components to ensure proper operation of the EVAP system.
- Clear Codes and Perform Test Drive: After completing the repairs, clear the trouble codes from the vehicle's computer system and perform a test drive to verify that the issue has been resolved.
Cost to Fix P2402 2013 Toyota RAV4
The typical repair costs for addressing the P2402 code on a 2013 Toyota RAV4 may range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less for repairs.
Need more information about the P2402 2013 Toyota RAV4 code?
Need more information on how to fix the P2402 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2402 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2402 2013 Toyota RAV4 Code
1. What does OBDII code P2402 mean for a 2013 Toyota RAV4?
The code P2402 in a 2013 Toyota RAV4 indicates a problem with the Evaporative Emission Leak Detection Pump being stuck ON.
2. What are the common symptoms of OBDII code P2402 in a Toyota RAV4?
Common symptoms of code P2402 may include the illumination of the check engine light on the dashboard and possible issues with the vehicle's emission system.
3. What are the possible causes of OBDII code P2402 in a 2013 Toyota RAV4?
Potential causes of code P2402 include a faulty Evaporative Emission Leak Detection Pump, wiring issues, or a malfunction in the related components of the evaporative emission system.
4. How serious is OBDII code P2402 in a Toyota RAV4?
While code P2402 may not necessarily cause immediate drivability issues, it is important to address this problem promptly to ensure proper functioning of the vehicle's emission control system.
5. Can I continue driving my Toyota RAV4 with OBDII code P2402?
It is generally safe to drive the vehicle with code P2402, but it is recommended to have the issue diagnosed and repaired at the earliest convenience to prevent potential damage to the emission system.
6. How can I diagnose OBDII code P2402 in my 2013 Toyota RAV4?
Diagnosing code P2402 usually involves using a diagnostic scanner to retrieve the code, inspecting the Evaporative Emission Leak Detection Pump and related components, and testing the system for proper operation.
7. What are the possible repair options for OBDII code P2402 in a Toyota RAV4?
Repair options for code P2402 may include replacing the Evaporative Emission Leak Detection Pump, repairing any damaged wiring, or addressing any other issues identified during the diagnosis.
8. Can I reset the check engine light after fixing OBDII code P2402 in my Toyota RAV4?
Once the underlying issue causing code P2402 is fixed, the check engine light can be reset using a diagnostic scanner to clear the code and turn off the warning light.
9. How much does it cost to repair OBDII code P2402 in a 2013 Toyota RAV4?
The cost of repairing code P2402 can vary depending on the specific cause of the issue, the cost of parts, and the labor rates of the repair shop. It is recommended to get a few quotes from different mechanics.
10. How often does OBDII code P2402 occur in 2013 Toyota RAV4 vehicles?
While the frequency of code P2402 can vary, it is not an uncommon issue in 2013 Toyota RAV4 vehicles, particularly as they age and components wear out.
Discuss the causes and fixes for P2402 2013 Toyota RAV4 OBDII Code
Code P2402 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.