P2402 2007 Toyota Camry Code - EVAP System Leak Detection Pump Control Circuit High
Quick Answer
The P2402 diagnostic trouble code for a 2007 Toyota Camry indicates a problem with the EVAP (Evaporative Emission Control System) System Leak Detection Pump Control Circuit being too high. Common causes include Faulty Leak Detection Pump: The LDP itself may be malfunctioning, causing the control circuit to read high voltage, Wiring Issues: Damaged or corroded wiring connecting the LDP to the ECM can cause electrical problems, Faulty Sensor: A malfunctioning sensor within the EVAP system can lead to incorrect voltage readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2402 2007 Toyota Camry indicates EVAP System Leak Detection Pump Control Circuit High.
- Common causes
- Common causes include Faulty Leak Detection Pump: The LDP itself may be malfunctioning, causing the control circuit to read high voltage, Wiring Issues: Damaged or corroded wiring connecting the LDP to the ECM can cause electrical problems, Faulty Sensor: A malfunctioning sensor within the EVAP system can lead to incorrect voltage readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2402 2007 Toyota Camry Description
The P2402 diagnostic trouble code for a 2007 Toyota Camry indicates a problem with the EVAP (Evaporative Emission Control System) System Leak Detection Pump Control Circuit being too high. The EVAP system is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The Leak Detection Pump (LDP) is a key component of this system, as it pressurizes and tests the integrity of the system for leaks.
Common Causes of P2402 2007 Toyota Camry
- Faulty Leak Detection Pump: The LDP itself may be malfunctioning, causing the control circuit to read high voltage.
- Wiring Issues: Damaged or corroded wiring connecting the LDP to the ECM can cause electrical problems.
- Faulty Sensor: A malfunctioning sensor within the EVAP system can lead to incorrect voltage readings.
- ECM Malfunction: A problem with the engine control module can also trigger this code.
Symptoms of P2402 2007 Toyota Camry
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Rough Idle: A rough or unstable idle may occur due to the improper functioning of the EVAP system.
- Decreased Fuel Efficiency: A decrease in fuel efficiency may be noticed as the EVAP system is not operating optimally.
- Failed Emissions Test: If the issue is not addressed, it may lead to a failed emissions test due to increased emissions.
How to Fix P2402 2007 Toyota Camry
- Diagnose the Issue: Use a scan tool to retrieve the trouble code and perform further diagnostics to pinpoint the exact cause of the high voltage reading.
- Inspect Wiring: Check the wiring harness for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test Leak Detection Pump: Test the LDP to determine if it is functioning properly. Replace if necessary.
- Check Sensors: Inspect all sensors related to the EVAP system to ensure they are working correctly.
- Clear Codes: Once the issue is resolved, clear the trouble code and test drive the vehicle to ensure the problem has been fixed.
Cost to Fix P2402 2007 Toyota Camry
The cost of repairing a P2402 code on a 2007 Toyota Camry can vary depending on the specific cause of the issue. In general, the cost of parts for this repair can range from $100 to $300, with the Leak Detection Pump itself being a significant portion of the cost. Labor costs can range from $100 to $300, depending on the shop's hourly rate and the complexity of the repair. It's important to note that additional diagnostic time may be needed to pinpoint the exact cause of the code, so the final cost may vary. It's recommended to consult with a trusted mechanic or repair shop for a more accurate estimate based on your specific situation.
When is the Code Detected?
Need more information about the P2402 2007 Toyota Camry code?
Need more information on how to fix the P2402 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2402 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2402 2007 Toyota Camry Code
1. What are the common symptoms of OBDII code P2402 in a 2007 Toyota Camry?
- Common symptoms include the check engine light coming on, decreased fuel efficiency, and potential issues with the vehicle's emissions system.
2. What does the OBDII code P2402 indicate in a 2007 Toyota Camry?
- OBDII code P2402 indicates a problem with the EVAP System Leak Detection Pump Control Circuit being too high in a 2007 Toyota Camry.
3. What are the possible causes of OBDII code P2402 in a 2007 Toyota Camry?
- Possible causes include a faulty leak detection pump, damaged wiring or connectors in the circuit, or a malfunctioning EVAP system pressure sensor.
4. How can I diagnose the OBDII code P2402 in my 2007 Toyota Camry?
- Diagnosing this code typically involves using a scan tool to check for other related trouble codes, testing the leak detection pump and its circuit, and inspecting the EVAP system components for any signs of damage.
5. What are the repair options for fixing OBDII code P2402 in a 2007 Toyota Camry?
- Repair options include replacing the leak detection pump, repairing or replacing damaged wiring or connectors, and fixing any issues with the EVAP system pressure sensor.
6. Can I continue driving my 2007 Toyota Camry with OBDII code P2402?
- It is not recommended to continue driving with this code present, as it can lead to increased emissions and potential damage to the vehicle's emissions system.
7. How much does it typically cost to repair OBDII code P2402 in a 2007 Toyota Camry?
- The cost of repair can vary depending on the exact cause of the code, but it may range from $200 to $500, including parts and labor.
8. Are there any DIY tips for troubleshooting OBDII code P2402 in a 2007 Toyota Camry?
- DIY tips include checking for loose or damaged wiring, inspecting the leak detection pump for signs of wear, and ensuring all EVAP system components are properly connected.
9. How long does it take to repair OBDII code P2402 in a 2007 Toyota Camry?
- The repair time can vary depending on the exact cause of the code and the availability of parts, but it typically takes a few hours to a full day to complete the repair.
10. Can OBDII code P2402 in a 2007 Toyota Camry cause any other issues if left untreated?
- If left untreated, OBDII code P2402 can potentially lead to a failed emissions test, decreased fuel efficiency, and further damage to the vehicle's emissions system.
Discuss the causes and fixes for P2402 2007 Toyota Camry OBDII Code
Code P2402 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.