P2402 2006 Toyota Highlander Code - EVAP System Leak Detection Pump Control Circuit High
Quick Answer
The P2402 diagnostic trouble code (DTC) for a 2006 Toyota Highlander indicates a problem with the EVAP (Evaporative Emission Control) system Leak Detection Pump Control Circuit being too high. Common causes include Faulty Leak Detection Pump: The LDP itself may be malfunctioning and not responding to the control circuit properly, Wiring Issues: Corrosion, breaks, or shorts in the wiring that connects the LDP to the ECM can cause high circuit readings, Faulty Sensor: A sensor that is sending incorrect signals to the ECM can trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2402 2006 Toyota Highlander indicates EVAP System Leak Detection Pump Control Circuit High.
- Common causes
- Common causes include Faulty Leak Detection Pump: The LDP itself may be malfunctioning and not responding to the control circuit properly, Wiring Issues: Corrosion, breaks, or shorts in the wiring that connects the LDP to the ECM can cause high circuit readings, Faulty Sensor: A sensor that is sending incorrect signals to the ECM can trigger this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2402 2006 Toyota Highlander Description
The P2402 diagnostic trouble code (DTC) for a 2006 Toyota Highlander indicates a problem with the EVAP (Evaporative Emission Control) system Leak Detection Pump Control Circuit being too high. The EVAP system is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from escaping into the atmosphere. The Leak Detection Pump (LDP) is a key component of this system, as it pressurizes and tests the integrity of the system for leaks.
Common Causes of P2402 2006 Toyota Highlander
- Faulty Leak Detection Pump: The LDP itself may be malfunctioning and not responding to the control circuit properly.
- Wiring Issues: Corrosion, breaks, or shorts in the wiring that connects the LDP to the ECM can cause high circuit readings.
- Faulty Sensor: A sensor that is sending incorrect signals to the ECM can trigger this code.
- ECM Malfunction: A problem with the engine control module that controls the LDP can also be a cause of this issue.
Symptoms of P2402 2006 Toyota Highlander
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Rough Idle: A high control circuit for the LDP can cause the engine to run rough or idle inconsistently.
- Decreased Fuel Efficiency: A malfunctioning EVAP system can lead to decreased fuel efficiency as fuel vapors are not being properly captured and recycled.
- Failed Emissions Test: If the EVAP system is not functioning correctly, it may cause the vehicle to fail an emissions test.
How to Fix P2402 2006 Toyota Highlander
- Diagnose the Issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the EVAP system components.
- Test the Leak Detection Pump: Check the functionality of the LDP to determine if it is operating correctly.
- Inspect Wiring and Connections: Examine the wiring harness and connectors for any damage or corrosion that may be affecting the control circuit.
- Replace Faulty Components: Replace any faulty components such as the Leak Detection Pump, sensor, or wiring as needed.
- Clear Codes and Test Drive: Once the repairs are completed, clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2402 2006 Toyota Highlander
The typical repair costs for addressing a P2402 code on a 2006 Toyota Highlander can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may charge less. It's recommended to check with local shops for a more accurate estimate.
When is the Code Detected?
Need more information about the P2402 2006 Toyota Highlander code?
Need more information on how to fix the P2402 2006 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2402 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2402 2006 Toyota Highlander Code
1. What are the common symptoms of OBDII code P2402 in a 2006 Toyota Highlander?
- Common symptoms may include the check engine light illuminating on the dashboard, decreased fuel efficiency, and potential difficulties with passing emissions tests.
2. What does the OBDII code P2402 in a 2006 Toyota Highlander indicate?
- This code specifically points to a problem with the EVAP system Leak Detection Pump Control Circuit, indicating a high voltage condition.
3. What are some potential causes of OBDII code P2402 in a 2006 Toyota Highlander?
- Causes may include a faulty leak detection pump, damaged wiring or connectors in the circuit, a malfunctioning control module, or a vacuum leak in the evaporative emissions system.
4. How can I diagnose the issue related to OBDII code P2402 in my 2006 Toyota Highlander?
- Diagnosing the problem may involve using an OBDII scanner to retrieve and interpret the code, inspecting the wiring and connectors for any visible damage, and testing components like the leak detection pump for proper function.
5. Can I continue driving my 2006 Toyota Highlander with OBDII code P2402?
- It is generally not recommended to ignore this code and continue driving, as it can lead to increased emissions and potential damage to other components of the vehicle.
6. Is it possible to clear the OBDII code P2402 in a 2006 Toyota Highlander by simply resetting the check engine light?
- While resetting the check engine light may temporarily clear the code, it is important to address the underlying issue causing the fault code to prevent it from reoccurring.
7. How much does it typically cost to repair OBDII code P2402 in a 2006 Toyota Highlander?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve expenses for parts replacement, labor, and diagnostic fees.
8. Are there any DIY repair tips for addressing OBDII code P2402 in a 2006 Toyota Highlander?
- DIY repair tips may include checking and cleaning electrical connectors, inspecting hoses for leaks, and ensuring all components in the EVAP system are properly connected.
9. Can a faulty gas cap trigger OBDII code P2402 in a 2006 Toyota Highlander?
- While a faulty gas cap is more commonly associated with other EVAP system codes, it is still a good idea to check and ensure the gas cap is properly sealed to rule out any potential issues.
10. How long does it typically take to repair OBDII code P2402 in a 2006 Toyota Highlander?
- The repair time can vary depending on the exact cause of the issue and the availability of parts, but it may range from a few hours to a day at a professional repair shop.
Discuss the causes and fixes for P2402 2006 Toyota Highlander OBDII Code
Code P2402 2006 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.