P2402 2005 Toyota Prius Code - EVAP System Leak Detection Pump Control Circuit High
Quick Answer
The P2402 diagnostic trouble code (DTC) for a 2005 Toyota Prius refers to an issue with the EVAP (Evaporative Emission Control) system leak detection pump control circuit being high. Common causes include Faulty leak detection pump, Wiring or connector issues in the control circuit, Corrosion or damage to the EVAP system components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2402 2005 Toyota Prius indicates EVAP System Leak Detection Pump Control Circuit High.
- Common causes
- Common causes include Faulty leak detection pump, Wiring or connector issues in the control circuit, Corrosion or damage to the EVAP system components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2402 2005 Toyota Prius Description
The P2402 diagnostic trouble code (DTC) for a 2005 Toyota Prius refers to an issue with the EVAP (Evaporative Emission Control) system leak detection pump control circuit being high. The EVAP system is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The leak detection pump is a key component of this system, as it pressurizes the fuel system to check for leaks.
Common Causes of P2402 2005 Toyota Prius
- Faulty leak detection pump
- Wiring or connector issues in the control circuit
- Corrosion or damage to the EVAP system components
- Vacuum leaks in the EVAP system
- Software issues in the vehicle's onboard computer
Symptoms of P2402 2005 Toyota Prius
- Check engine light illuminated
- Decreased fuel efficiency
- Strong fuel odor
- Failed emissions test
- Rough idling or stalling
How to Fix P2402 2005 Toyota Prius
- Diagnose the specific cause of the high circuit reading using a scan tool to pinpoint the issue.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Test the leak detection pump to ensure it is functioning properly, replacing it if necessary.
- Check for any vacuum leaks in the EVAP system and repair as needed.
- Clear the DTC and reset the check engine light to verify that the issue has been resolved.
Cost to Fix P2402 2005 Toyota Prius
The cost of repairing a P2402 DTC on a 2005 Toyota Prius can vary depending on the specific cause of the issue. In general, the cost of parts for this repair can range from $100 to $300, with labor costs adding an additional $100 to $200. Overall, the total repair cost is typically between $200 and $500. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P2402 2005 Toyota Prius code?
Need more information on how to fix the P2402 2005 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2402 2005 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2402 2005 Toyota Prius Code
1. What does OBDII code P2402 mean on a 2005 Toyota Prius?
- OBDII code P2402 indicates a problem with the EVAP system leak detection pump control circuit being high.
2. What are common symptoms of OBDII code P2402 on a 2005 Toyota Prius?
- Common symptoms include the check engine light being illuminated, rough idling, decreased fuel efficiency, and potential issues with emissions.
3. What are possible causes of OBDII code P2402 on a 2005 Toyota Prius?
- Possible causes include a faulty leak detection pump, damaged wiring or connectors in the circuit, a malfunctioning EVAP system pressure sensor, or a defective ECM.
4. How can I diagnose OBDII code P2402 on my 2005 Toyota Prius?
- Diagnosing OBDII code P2402 may involve checking the integrity of the wiring and connectors in the EVAP system, testing the leak detection pump, and verifying the operation of the EVAP system pressure sensor.
5. Can I still drive my 2005 Toyota Prius with OBDII code P2402?
- It is generally safe to drive your vehicle with code P2402, but it is recommended to have the issue diagnosed and repaired as soon as possible to avoid potential emissions problems.
6. How can I repair OBDII code P2402 on my 2005 Toyota Prius?
- Repairing code P2402 may involve replacing the leak detection pump, repairing damaged wiring or connectors, replacing the EVAP system pressure sensor, or reprogramming the ECM.
7. Can I reset OBDII code P2402 on my 2005 Toyota Prius?
- Yes, you can reset the code using an OBDII scanner or by disconnecting the battery for a few minutes. However, the underlying issue causing the code should still be addressed.
8. Will OBDII code P2402 on a 2005 Toyota Prius cause emissions test failure?
- Yes, code P2402 may cause your vehicle to fail emissions testing as it indicates a problem with the EVAP system, which is crucial for controlling emissions.
9. How much does it cost to repair OBDII code P2402 on a 2005 Toyota Prius?
- The cost of repairing code P2402 can vary depending on the specific issue, but it may range from $100 to $500 or more, including parts and labor.
10. How often does OBDII code P2402 occur on a 2005 Toyota Prius?
- OBDII code P2402 is not a common code for a 2005 Toyota Prius, but it can occur due to various factors affecting the EVAP system.
Discuss the causes and fixes for P2402 2005 Toyota Prius OBDII Code
Code P2402 2005 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.