P2328 Chrysler Code - Ignition Coil 'J' Primary Control Circuit High
Quick Answer
The P2328 Chrysler code refers to the ignition coil 'J' primary control circuit high. Common causes include Faulty ignition coil 'J', Damaged wiring or connectors in the primary control circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2328 Chrysler indicates Ignition Coil 'J' Primary Control Circuit High.
- Common causes
- Common causes include Faulty ignition coil 'J', Damaged wiring or connectors in the primary control circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2328 Chrysler Description
The P2328 Chrysler code refers to the ignition coil 'J' primary control circuit high. This means that the engine control module (ECM) has detected an abnormally high voltage in the primary control circuit of the ignition coil 'J'. The ignition coil is responsible for converting the low-voltage battery power into the high-voltage spark needed to ignite the fuel mixture in the engine cylinders. When the primary control circuit voltage is too high, it can lead to issues with the ignition system, resulting in poor engine performance, misfires, and potentially engine stalling.
Common Causes of P2328 Chrysler
- Faulty ignition coil 'J'
- Damaged wiring or connectors in the primary control circuit
- Malfunctioning ECM
- Power supply issues to the ignition coil
- Corrosion or moisture in the ignition system components
Symptoms of P2328 Chrysler
- Engine misfires or rough idling
- Loss of power or acceleration
- Check Engine Light illuminated
- Engine stalling or difficulty starting
- Reduced fuel efficiency
How to Fix P2328 Chrysler
- Perform a thorough inspection of the ignition coil 'J', wiring, and connectors for any visible damage or corrosion.
- Test the primary control circuit voltage using a multimeter to determine if it is within the specified range.
- Replace the ignition coil 'J' if it is found to be faulty.
- Repair or replace any damaged wiring or connectors in the primary control circuit.
- Clear the diagnostic trouble codes from the ECM and perform a test drive to ensure the issue has been resolved.
Cost to Fix P2328 Chrysler
The cost to repair the P2328 Chrysler code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. On average, the parts for an ignition coil replacement can range from $50 to $200, while the labor costs can range from $100 to $200. Overall, the total repair costs for this issue could range from $150 to $400. It is important to note that these are rough estimates, and actual costs may vary based on the location, vehicle make and model, and other factors. It is recommended to consult with a qualified mechanic for a more accurate cost estimate.
Need more information about the P2328 Chrysler code?
Need more information on how to fix the P2328 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2328 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2328 Chrysler Code
1. What does the OBDII code P2328 mean on a Chrysler?
P2328 indicates an issue with the Ignition Coil 'J' Primary Control Circuit, specifically that the voltage is higher than expected.
2. What are the common symptoms of the P2328 code on a Chrysler?
Symptoms may include engine misfires, rough idling, reduced power, poor fuel economy, and the Check Engine Light being illuminated.
3. What causes the P2328 code on a Chrysler?
Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, a malfunctioning Powertrain Control Module (PCM), or excessive resistance in the circuit.
4. Can I drive my Chrysler with the P2328 code?
While the vehicle may still run, driving with this code can cause further damage to the ignition system or catalytic converter if misfires occur. It's best to address the issue promptly.
5. How do I diagnose the P2328 code on a Chrysler?
Start by inspecting the ignition coil and its wiring for damage or loose connections. Use a multimeter to check for proper voltage and continuity. If no issues are found, test or replace the ignition coil.
6. How do I fix the P2328 code on a Chrysler?
Repairs may include replacing the ignition coil, repairing or replacing damaged wiring, cleaning or reconnecting corroded connectors, or, in rare cases, reprogramming or replacing the PCM.
7. How much does it cost to repair the P2328 code on a Chrysler?
Repair costs vary but typically range from $100 to $300 for parts and labor, depending on whether the ignition coil or wiring needs replacement.
8. Can a bad PCM cause the P2328 code on a Chrysler?
Yes, though it is less common, a malfunctioning PCM can send incorrect signals to the ignition coil, triggering this code.
9. How can I prevent the P2328 code from recurring?
Regular maintenance, including inspecting the ignition system and addressing any wiring issues promptly, can help prevent this code from reappearing.
10. Does the P2328 code always mean the ignition coil is bad?
No, the problem could also stem from wiring issues, connector problems, or PCM faults. Proper diagnosis is essential before replacing any components.
Discuss the causes and fixes for P2328 Chrysler OBDII Code
Code P2328 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.