P2314 Dodge Code - Ignition Coil 'E' Secondary Circuit
Quick Answer
The P2314 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the ignition coil 'E' secondary circuit. Common causes include Faulty ignition coil 'E', Damaged or corroded wiring in the secondary circuit, Loose or disconnected electrical connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2314 Dodge indicates Ignition Coil 'E' Secondary Circuit.
- Common causes
- Common causes include Faulty ignition coil 'E', Damaged or corroded wiring in the secondary circuit, Loose or disconnected electrical connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2314 Dodge Description
The P2314 diagnostic trouble code (DTC) for Dodge vehicles indicates a problem with the ignition coil 'E' secondary circuit. The ignition coil is a crucial component in the ignition system that converts the low voltage from the battery into the high voltage needed to create a spark in the spark plugs. In this case, the secondary circuit of ignition coil 'E' is experiencing an issue, which can lead to misfires, poor engine performance, and potential long-term damage if not addressed promptly.
Common Causes of P2314 Dodge
- Faulty ignition coil 'E'
- Damaged or corroded wiring in the secondary circuit
- Loose or disconnected electrical connectors
- Issues with the Engine Control Module (ECM)
- Extreme weather conditions affecting the ignition system
Symptoms of P2314 Dodge
- Check Engine Light illuminated
- Rough idling
- Engine misfires
- Hesitation or stumbling during acceleration
- Stalling
How to Fix P2314 Dodge
- Diagnose the specific cause of the issue by using a scan tool to read the DTC and perform a visual inspection of the ignition coil 'E' and associated components.
- Test the ignition coil 'E' using a multimeter to check for proper resistance and continuity.
- Inspect the wiring in the secondary circuit for damage or corrosion and repair or replace as necessary.
- Ensure all electrical connectors are securely connected and free of corrosion.
- Clear the DTC and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P2314 Dodge
The cost to repair the ignition coil 'E' secondary circuit issue can vary depending on the cause of the problem and the labor rates at the auto repair shop. On average, the parts cost for a new ignition coil ranges from $50 to $150, while labor costs can range from $100 to $200. Overall, the total repair cost for this issue typically falls between $150 and $350. It's important to keep in mind that these estimates are general guidelines, and actual costs may vary based on location, vehicle make and model, and other factors.
Need more information about the P2314 Dodge code?
Need more information on how to fix the P2314 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2314 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2314 Dodge Code
What does the OBDII code P2314 mean on a Dodge?
P2314 indicates a fault in the ignition coil 'E' secondary circuit, which means the engine control module (ECM) has detected an issue with the performance or functionality of the ignition coil for cylinder 'E'.
What are the common symptoms of code P2314 in a Dodge?
Symptoms may include engine misfires, rough idling, reduced engine performance, poor fuel economy, and the illumination of the check engine light.
What causes the P2314 code to appear on a Dodge?
Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition circuit, a malfunctioning spark plug, or, less commonly, an issue with the engine control module (ECM).
Can I drive my Dodge with the P2314 code?
Driving with this code is not recommended, as it can lead to engine misfires, reduced performance, and potential long-term damage to the catalytic converter.
How do I diagnose the P2314 code on a Dodge?
Perform a visual inspection of the ignition coil, wiring, and connectors for damage. Use an OBDII scanner to confirm the code and test the ignition coil and related components with a multimeter for proper resistance and voltage.
What is the ignition coil 'E' in a Dodge?
Ignition coil 'E' refers to the specific coil responsible for providing spark to a designated cylinder, which varies by engine type. Consult your vehicle's service manual to identify its location.
How do I fix the P2314 code on my Dodge?
Repairs may involve replacing the ignition coil, repairing damaged wiring or connectors, replacing the spark plug for the affected cylinder, or reprogramming or replacing the ECM if necessary.
How much does it cost to fix code P2314 on a Dodge?
The cost depends on the repair. Replacing an ignition coil typically costs $100–$300, while fixing wiring or connectors may vary. ECM replacement or reprogramming can cost $500–$1,500.
Can a bad spark plug cause the P2314 code on a Dodge?
Yes, a worn or faulty spark plug can cause ignition coil issues and trigger the P2314 code by disrupting the secondary circuit's operation.
Will clearing the P2314 code fix the problem?
Clearing the code will turn off the check engine light temporarily, but it won’t fix the underlying issue. The code will return if the problem isn’t properly addressed.
Discuss the causes and fixes for P2314 Dodge OBDII Code
-
No, the P2314 could be set by a problem with the ignition coil wires or by the coil itself.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.