P2314 Chrysler Code - Ignition Coil 'E' Secondary Circuit
Quick Answer
The P2314 Chrysler diagnostic trouble code indicates a problem with the Ignition Coil 'E' Secondary Circuit. Common causes include Faulty ignition coil, Damaged spark plugs, Wiring harness issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2314 Chrysler indicates Ignition Coil 'E' Secondary Circuit.
- Common causes
- Common causes include Faulty ignition coil, Damaged spark plugs, Wiring harness issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2314 Chrysler Description
The P2314 Chrysler diagnostic trouble code indicates a problem with the Ignition Coil 'E' Secondary Circuit. In a vehicle's ignition system, the ignition coil is responsible for converting low voltage from the battery into the high voltage needed to ignite the fuel-air mixture in the combustion chambers. The secondary circuit of the ignition coil is crucial for delivering this high voltage spark to the spark plugs, which in turn ignites the air-fuel mixture to power the engine.
Common Causes of P2314 Chrysler
- Faulty ignition coil
- Damaged spark plugs
- Wiring harness issues
- Engine control module (ECM) malfunction
- Poor electrical connections
Symptoms of P2314 Chrysler
- Engine misfires
- Rough idling
- Poor acceleration
- Decreased fuel efficiency
- Engine stalling
How to Fix P2314 Chrysler
- Perform a visual inspection of the ignition coil, spark plugs, and wiring harness to check for any visible damage.
- Test the ignition coil with a multimeter to determine if it is functioning within the manufacturer's specifications.
- Replace any faulty ignition coils, damaged spark plugs, or defective wiring harness components.
- Clear the diagnostic trouble codes from the vehicle's ECM and perform a test drive to ensure the issue has been resolved.
Cost to Fix P2314 Chrysler
The typical repair costs for addressing the Ignition Coil 'E' Secondary Circuit issue can vary depending on the extent of the problem and the specific components that need to be replaced. On average, the cost of replacing an ignition coil can range from $100 to $300, while replacing spark plugs may cost around $50 to $150. Labor costs can add an additional $80 to $150 per hour, with the total repair bill potentially ranging from $200 to $500 or more. It's important to consult with a trusted mechanic or auto repair shop to get an accurate estimate based on the vehicle's make and model, as well as the local labor rates.
Need more information about the P2314 Chrysler code?
Need more information on how to fix the P2314 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2314 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2314 Chrysler Code
1. What are the common symptoms of OBDII code P2314 in a Chrysler related to the Ignition Coil 'E' Secondary Circuit?
- Common symptoms include engine misfires, rough idling, lack of power, and potential stalling.
2. What are the possible causes of OBDII code P2314 in a Chrysler?
- Possible causes include a faulty ignition coil 'E', wiring issues in the secondary circuit, or a problem with the Engine Control Module (ECM).
3. How can I diagnose the issue causing OBDII code P2314 in my Chrysler?
- You can start by visually inspecting the ignition coil 'E' and its wiring for any visible damage. Using a multimeter, you can test the resistance of the coil and check for continuity in the circuit.
4. Can a bad spark plug cause OBDII code P2314 to appear in a Chrysler?
- While a bad spark plug can contribute to ignition issues, OBDII code P2314 specifically relates to problems in the Ignition Coil 'E' Secondary Circuit.
5. What are some repair tips for resolving OBDII code P2314 in a Chrysler?
- Repair tips may include replacing the faulty ignition coil 'E', repairing any damaged wiring in the secondary circuit, or resetting the ECM after repairs are made.
6. Is it safe to continue driving my Chrysler with OBDII code P2314 present?
- It is not recommended to drive with this code present, as it can lead to more serious engine issues and potential damage over time.
7. How much does it typically cost to repair OBDII code P2314 in a Chrysler at a professional mechanic or dealership?
- Repair costs can vary depending on the exact cause of the issue, but expect to pay for diagnostic time, replacement parts, and labor, which can range from around $100 to $500 or more.
8. Can resetting the OBDII system clear the P2314 code in a Chrysler temporarily?
- Resetting the system may temporarily clear the code, but if the underlying issue causing P2314 is not addressed, the code is likely to reappear.
9. Are there any preventative maintenance steps I can take to avoid OBDII code P2314 in my Chrysler?
- Regularly inspecting and maintaining your ignition system, including the coils and wiring, can help prevent issues that lead to OBDII code P2314.
10. Can a DIY enthusiast with basic automotive knowledge repair OBDII code P2314 in a Chrysler themselves?
- Depending on the specific cause, a DIY enthusiast may be able to replace the ignition coil 'E' or repair simple wiring issues, but more complex diagnostics and repairs may require professional assistance.
Discuss the causes and fixes for P2314 Chrysler OBDII Code
Code P2314 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.