P2312 2017 GMC Sierra Code - Ignition Coil 5 Control Circuit Low Voltage
Quick Answer
The P2312 diagnostic trouble code (DTC) for a 2017 GMC Sierra specifically refers to the Ignition Coil 5 Control Circuit Low Voltage. Common causes include Faulty ignition coil, Damaged wiring or connectors in the control circuit, Issues with the engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2312 2017 GMC Sierra indicates Ignition Coil 5 Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty ignition coil, Damaged wiring or connectors in the control circuit, Issues with the engine control module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2312 2017 GMC Sierra Description
The P2312 diagnostic trouble code (DTC) for a 2017 GMC Sierra specifically refers to the Ignition Coil 5 Control Circuit Low Voltage. This code indicates that there is an issue with the electrical circuit that controls the ignition coil for cylinder 5 in the engine. The ignition coil is a crucial component in the ignition system of a vehicle, responsible for converting the low voltage from the battery into the high voltage needed to create a spark in the spark plugs. This spark is essential for igniting the air-fuel mixture in the combustion chamber, ultimately powering the engine.
Common Causes of P2312 2017 GMC Sierra
- Faulty ignition coil
- Damaged wiring or connectors in the control circuit
- Issues with the engine control module (ECM)
- Battery or charging system problems
- Environmental factors such as moisture or corrosion
Symptoms of P2312 2017 GMC Sierra
- Rough idling or engine misfires
- Decreased engine performance
- Reduced fuel efficiency
- Engine stalling
- Increased emissions
How to Fix P2312 2017 GMC Sierra
- Begin by conducting a visual inspection of the ignition coil, wiring, and connectors to check for any obvious signs of damage or wear.
- Use a multimeter to test the voltage in the control circuit for ignition coil 5 to determine if it is indeed low.
- If the voltage is low, replace the ignition coil and repair any damaged wiring or connectors in the circuit.
- Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, further diagnostics may be necessary to identify any underlying ECM or charging system issues.
Cost to Fix P2312 2017 GMC Sierra
The typical repair costs for addressing an Ignition Coil 5 Control Circuit Low Voltage issue can range from $100 to $300, including parts and labor. However, specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Need more information about the P2312 2017 GMC Sierra code?
Need more information on how to fix the P2312 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2312 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2312 2017 GMC Sierra Code
1. What does the OBDII code P2312 mean on a 2017 GMC Sierra?
P2312 indicates a "Ignition Coil 5 Control Circuit Low Voltage," meaning the engine control module (ECM) has detected a low voltage issue in the control circuit for ignition coil 5.
2. What are the common symptoms of P2312 in a 2017 GMC Sierra?
Symptoms may include engine misfires, rough idling, reduced engine power, poor fuel economy, or the Check Engine Light being illuminated.
3. What causes the P2312 code to appear?
Common causes include a faulty ignition coil, damaged wiring or connectors in the coil 5 control circuit, a failing ECM, or corrosion at electrical connections.
4. How do I diagnose the P2312 code on my GMC Sierra?
Use an OBDII scanner to confirm the code, inspect the ignition coil 5 and its wiring for damage or corrosion, and test the voltage and resistance in the circuit to ensure proper operation.
5. Can I drive my 2017 GMC Sierra with a P2312 code?
Driving with this code is not recommended as it can lead to engine misfires, reduced performance, and potential damage to other engine components like the catalytic converter.
6. How do I fix the P2312 code on a 2017 GMC Sierra?
Repairs may include replacing the ignition coil for cylinder 5, repairing or replacing damaged wiring or connectors in the circuit, or addressing any issues with the ECM.
7. How much does it cost to fix the P2312 code on a GMC Sierra?
Repair costs vary but typically range from $150 to $400, depending on whether the issue is with the ignition coil, wiring, or ECM.
8. Can a bad spark plug cause the P2312 code?
While spark plugs themselves don’t directly cause this code, a faulty spark plug in cylinder 5 can strain the ignition coil, potentially leading to circuit issues.
9. What tools do I need to troubleshoot the P2312 code?
You'll need an OBDII scanner, a multimeter to test voltage and resistance, and possibly a wiring diagram for the ignition system.
10. How can I prevent the P2312 code from reoccurring?
Regularly inspect and maintain the ignition system, including coils, wiring, and spark plugs, and promptly address any issues to prevent future electrical circuit failures.
Discuss the causes and fixes for P2312 2017 GMC Sierra OBDII Code
Code P2312 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.