P2310 2017 GMC Sierra Code - Ignition Coil 4 Control Circuit High Voltage
Quick Answer
The P2310 diagnostic trouble code (DTC) in a 2017 GMC Sierra indicates that there is a high voltage condition in the control circuit of ignition coil 4. Common causes include Faulty ignition coil: The ignition coil itself may be malfunctioning, causing high voltage in the control circuit, Wiring issues: Damaged or corroded wiring connecting the ignition coil to the ECM can disrupt the voltage levels, ECM malfunction: A problem with the Engine Control Module can also lead to high voltage in the ignition coil circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2310 2017 GMC Sierra indicates Ignition Coil 4 Control Circuit High Voltage.
- Common causes
- Common causes include Faulty ignition coil: The ignition coil itself may be malfunctioning, causing high voltage in the control circuit, Wiring issues: Damaged or corroded wiring connecting the ignition coil to the ECM can disrupt the voltage levels, ECM malfunction: A problem with the Engine Control Module can also lead to high voltage in the ignition coil circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2310 2017 GMC Sierra Description
The P2310 diagnostic trouble code (DTC) in a 2017 GMC Sierra indicates that there is a high voltage condition in the control circuit of ignition coil 4. This means that the Engine Control Module (ECM) has detected an abnormal voltage level in the ignition coil circuit that is beyond the specified range. The ignition coil plays a crucial role in the ignition system by converting the low voltage from the battery into the high voltage needed to create a spark in the spark plug, which ignites the air-fuel mixture in the combustion chamber. When the ignition coil control circuit experiences high voltage, it can lead to various issues affecting the vehicle's performance.
Common Causes of P2310 2017 GMC Sierra
- Faulty ignition coil: The ignition coil itself may be malfunctioning, causing high voltage in the control circuit.
- Wiring issues: Damaged or corroded wiring connecting the ignition coil to the ECM can disrupt the voltage levels.
- ECM malfunction: A problem with the Engine Control Module can also lead to high voltage in the ignition coil circuit.
- Short circuit: A short circuit in the ignition coil control circuit can cause abnormal voltage levels.
- Overvoltage: Excessive voltage from the battery or alternator can result in high voltage in the ignition coil control circuit.
Symptoms of P2310 2017 GMC Sierra
- Rough idling: The engine may run unevenly or have a noticeable shake at idle.
- Misfires: The vehicle may experience misfires, which can result in a loss of power and decreased fuel efficiency.
- Decreased acceleration: The vehicle may struggle to accelerate smoothly or quickly.
- Engine stalling: The engine may stall unexpectedly while driving, especially at lower speeds.
- Check Engine Light: The Check Engine Light may illuminate on the dashboard to indicate a problem with the ignition coil control circuit.
How to Fix P2310 2017 GMC Sierra
- Diagnose the issue: Use a scan tool to retrieve the DTC and perform a thorough inspection of the ignition coil control circuit to identify the root cause of the high voltage.
- Test the ignition coil: Check the ignition coil for proper functioning by conducting a resistance test or using an oscilloscope to analyze the coil's output.
- Inspect wiring: Examine the wiring harness for any damage, corrosion, or loose connections that may be causing the high voltage condition.
- Replace faulty components: If the ignition coil or any wiring is found to be defective, replace them with new parts to restore normal operation.
- Clear DTC and test drive: After completing the repairs, clear the DTC from the ECM memory and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P2310 2017 GMC Sierra
The typical repair costs for addressing a P2310 code related to the ignition coil control circuit high voltage in a 2017 GMC Sierra can vary depending on the specific cause of the issue. On average, the parts required for this repair, such as a new ignition coil or wiring harness, can range from $50 to $200. Labor costs at auto repair shops typically range between $80 and $150 per hour, with the total labor time for this repair likely falling within 1-2 hours. Therefore, the total cost for addressing this issue could range from $130 to $500, including parts and labor. It is recommended to check with local auto repair shops for accurate estimates based on your location and vehicle specifics.
Need more information about the P2310 2017 GMC Sierra code?
Need more information on how to fix the P2310 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2310 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2310 2017 GMC Sierra Code
1. What does the OBDII code P2310 mean on a 2017 GMC Sierra?
P2310 indicates a high voltage issue in the Ignition Coil 4 control circuit, which could affect the engine's performance.
2. What are the symptoms of code P2310 on a 2017 GMC Sierra?
Common symptoms include engine misfires, rough idling, reduced engine performance, and the Check Engine Light turning on.
3. What causes the P2310 code to appear on a 2017 GMC Sierra?
Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, or a malfunctioning Powertrain Control Module (PCM).
4. Can I drive my 2017 GMC Sierra with the P2310 code?
Driving with this code can lead to poor engine performance and potential damage to other components, so it’s best to address the issue promptly.
5. How do I diagnose the P2310 code on my 2017 GMC Sierra?
Start by inspecting the wiring and connectors for Ignition Coil 4, testing the coil itself, and checking for proper voltage and ground signals.
6. How is the P2310 code fixed on a 2017 GMC Sierra?
Repairs may include replacing the faulty ignition coil, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.
7. Can a bad spark plug cause the P2310 code on a 2017 GMC Sierra?
While it’s unlikely, a severely worn or damaged spark plug in Cylinder 4 could impact ignition and should be checked during the diagnostic process.
8. What tools are needed to fix the P2310 code on a 2017 GMC Sierra?
You may need an OBDII scanner, a multimeter, and basic hand tools to inspect and test the ignition coil circuit.
9. How much does it cost to repair the P2310 code on a 2017 GMC Sierra?
Repair costs vary but typically range from $150 to $400, depending on whether the ignition coil, wiring, or PCM needs replacement.
10. Can a dead battery cause the P2310 code on a 2017 GMC Sierra?
A weak or dead battery is unlikely to directly cause this code, but low voltage can sometimes lead to electrical issues in the ignition system.
Discuss the causes and fixes for P2310 2017 GMC Sierra OBDII Code
Code P2310 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.