P2307 Dodge Code - Ignition Coil 'C' Primary Control Circuit High
Quick Answer
The P2307 diagnostic trouble code for Dodge vehicles indicates a problem with the ignition coil 'C' primary control circuit being too high. Common causes include Faulty ignition coil 'C', Wiring or connection issues in the ignition coil 'C' primary control circuit, ECM software or hardware issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2307 Dodge indicates Ignition Coil 'C' Primary Control Circuit High.
- Common causes
- Common causes include Faulty ignition coil 'C', Wiring or connection issues in the ignition coil 'C' primary control circuit, ECM software or hardware issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2307 Dodge Description
The P2307 diagnostic trouble code for Dodge vehicles indicates a problem with the ignition coil 'C' primary control circuit being too high. The ignition coil is a crucial component of the ignition system, responsible for converting low voltage from the battery into the high voltage needed to ignite the fuel-air mixture in the engine cylinders. The primary control circuit refers to the circuit that controls the operation of the ignition coil.
Common Causes of P2307 Dodge
- Faulty ignition coil 'C'
- Wiring or connection issues in the ignition coil 'C' primary control circuit
- ECM software or hardware issues
- Electrical short in the ignition system
- Corrosion or damage to the ignition coil 'C' primary control circuit
Symptoms of P2307 Dodge
- Engine misfires
- Rough idling or uneven engine performance
- Decreased fuel efficiency
- Check Engine Light illuminated
- Stalling or difficulty starting the vehicle
How to Fix P2307 Dodge
- Diagnose the issue by using a scan tool to read the fault codes and perform a thorough inspection of the ignition coil 'C' primary control circuit.
- Inspect the wiring and connections related to the ignition coil 'C' for any damage, corrosion, or loose connections.
- Test the ignition coil 'C' for proper operation, checking for resistance and continuity.
- Replace the ignition coil 'C' if it is found to be faulty, ensuring it is the correct part for the specific vehicle make and model.
- Clear the fault codes from the ECM and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P2307 Dodge
The cost of repairing the P2307 code for the ignition coil 'C' primary control circuit high can vary depending on the specific cause of the issue and the labor rates in your area. On average, the cost of replacing an ignition coil can range from $100 to $300, including parts and labor. Additional costs may be incurred if wiring repairs or ECM diagnostics are required. It is recommended to consult with a qualified mechanic or auto repair shop to get a more accurate estimate based on your vehicle's specific needs. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors.
Need more information about the P2307 Dodge code?
Need more information on how to fix the P2307 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2307 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2307 Dodge Code
1. What does the OBDII code P2307 mean on a Dodge vehicle?
P2307 indicates an issue with the ignition coil 'C' primary control circuit, specifically a high voltage condition.
2. What are the common symptoms of code P2307 in a Dodge?
Symptoms may include a misfiring engine, rough idling, decreased fuel efficiency, reduced engine performance, and the Check Engine Light illuminated.
3. What causes the P2307 code in a Dodge?
Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, a malfunctioning Powertrain Control Module (PCM), or corrosion in the electrical connections.
4. How do I diagnose the P2307 code in my Dodge?
Start by inspecting the ignition coil and its wiring for visible damage or corrosion. Use a multimeter to check for proper voltage and continuity in the ignition coil circuit.
5. Can a bad ignition coil trigger the P2307 code?
Yes, a faulty ignition coil is one of the most common causes of the P2307 code.
6. Is it safe to drive with the P2307 code on my Dodge?
Driving with this code is not recommended, as it can lead to engine misfires, reduced performance, and potential damage to other engine components.
7. How can I fix the P2307 code on my Dodge?
Repairs may include replacing the ignition coil, repairing or replacing damaged wiring or connectors, and clearing corrosion from electrical connections.
8. How much does it cost to fix the P2307 code on a Dodge?
Repair costs vary, but replacing an ignition coil typically ranges from $100 to $300, including parts and labor.
9. Can a failing PCM cause the P2307 code?
Yes, although less common, a malfunctioning PCM can cause this code by failing to properly control the ignition coil circuit.
10. Will clearing the P2307 code with a scan tool fix the issue?
Clearing the code will reset the Check Engine Light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2307 Dodge OBDII Code
Code P2307 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.