P2306 Dodge Code - Ignition Coil 'C' Primary Control Circuit Low
Quick Answer
The P2306 diagnostic trouble code (DTC) for Dodge vehicles indicates an issue with the ignition coil 'C' primary control circuit being low. Common causes include Faulty ignition coil 'C', Corroded or damaged wiring/connectors leading to the ignition coil, Issues with the powertrain control module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2306 Dodge indicates Ignition Coil 'C' Primary Control Circuit Low.
- Common causes
- Common causes include Faulty ignition coil 'C', Corroded or damaged wiring/connectors leading to the ignition coil, Issues with the powertrain control module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2306 Dodge Description
The P2306 diagnostic trouble code (DTC) for Dodge vehicles indicates an issue with the ignition coil 'C' primary control circuit being low. This means that the power signal going to the ignition coil for cylinder 'C' is below the expected range. The ignition coil is responsible for converting the low voltage from the battery into the high voltage needed to create a spark in the spark plugs, which ignites the air-fuel mixture in the combustion chamber. When the primary control circuit is low, it can lead to misfires, rough idling, and poor fuel economy.
Common Causes of P2306 Dodge
- Faulty ignition coil 'C'
- Corroded or damaged wiring/connectors leading to the ignition coil
- Issues with the powertrain control module (PCM)
- Electrical short circuit in the ignition coil circuit
- Engine overheating causing damage to the ignition coil
Symptoms of P2306 Dodge
- Engine misfires
- Rough idling or vibrations
- Poor fuel economy
- Engine hesitation during acceleration
- Illuminated check engine light
How to Fix P2306 Dodge
- Begin by diagnosing the specific cause of the issue, which may involve using a multimeter to check the continuity of the wiring and connectors leading to the ignition coil.
- If the ignition coil 'C' is found to be faulty, it should be replaced with a new one. Ensure that the replacement part is compatible with the vehicle's make and model.
- Check and repair any corroded or damaged wiring/connectors in the ignition coil circuit.
- Clear the error codes using an OBD-II scanner and test drive the vehicle to ensure that the issue has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the PCM or other related components.
Cost to Fix P2306 Dodge
The typical cost to repair the P2306 code for the ignition coil 'C' primary control circuit low can range from $150 to $300, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more accurate estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Need more information about the P2306 Dodge code?
Need more information on how to fix the P2306 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2306 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2306 Dodge Code
What does the OBDII code P2306 mean for a Dodge vehicle?
The code P2306 indicates an issue with the ignition coil 'C' primary control circuit, specifically a low voltage condition detected by the Powertrain Control Module (PCM).
What are the common symptoms of the P2306 code?
Symptoms include engine misfires, rough idling, reduced fuel efficiency, difficulty starting, and the Check Engine Light being illuminated.
What causes the P2306 code to appear?
Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil circuit, a malfunctioning PCM, or issues with the coil driver circuit.
Can a faulty ignition coil trigger the P2306 code?
Yes, a faulty ignition coil can cause the primary control circuit to have low voltage, triggering this code.
How can I diagnose the P2306 code?
Diagnose by checking the ignition coil 'C' and its related wiring, inspecting for damage or corrosion, and testing the coil's resistance and voltage using a multimeter.
What tools are needed to fix the P2306 code?
Common tools include a multimeter, a diagnostic scan tool, and basic hand tools for inspecting and replacing components.
How do you fix the P2306 code?
Repairs may involve replacing the faulty ignition coil, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.
Can driving with the P2306 code damage my Dodge vehicle?
Driving with this code can lead to engine misfires, which may damage the catalytic converter or other engine components over time.
Is it expensive to repair the P2306 code?
Repair costs depend on the cause but can range from replacing inexpensive wiring to the more costly replacement of the PCM or ignition coil.
Should I clear the P2306 code after repairs?
Yes, use a diagnostic tool to clear the code after repairs and test drive the vehicle to ensure the issue is resolved.
Discuss the causes and fixes for P2306 Dodge OBDII Code
Code P2306 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.