P2303 2017 GMC Sierra Code - Ignition Coil 2 Control Circuit Low Voltage
Quick Answer
The diagnostic trouble code P2303 for a 2017 GMC Sierra refers to an issue with the Ignition Coil 2 Control Circuit experiencing low voltage. Common causes include Faulty ignition coil 2, Damaged wiring or connectors in the ignition coil circuit, Malfunctioning ECM or PCM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2303 2017 GMC Sierra indicates Ignition Coil 2 Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty ignition coil 2, Damaged wiring or connectors in the ignition coil circuit, Malfunctioning ECM or PCM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2303 2017 GMC Sierra Description
The diagnostic trouble code P2303 for a 2017 GMC Sierra refers to an issue with the Ignition Coil 2 Control Circuit experiencing low voltage. In a vehicle's ignition system, the ignition coil plays a crucial role in converting the low voltage from the battery into the high voltage needed to ignite the fuel-air mixture in the engine's combustion chamber. Ignition coils are typically controlled by the engine control module (ECM) or powertrain control module (PCM). When the ECM detects that the voltage in the control circuit for ignition coil 2 is lower than the specified range, it triggers the P2303 trouble code.
Common Causes of P2303 2017 GMC Sierra
- Faulty ignition coil 2
- Damaged wiring or connectors in the ignition coil circuit
- Malfunctioning ECM or PCM
- Issues with the power supply to the ignition coil
- Electrical interference or corrosion
Symptoms of P2303 2017 GMC Sierra
- Engine misfires
- Rough idling or hesitation
- Reduced engine performance
- Illumination of the check engine light
- Engine stalling or difficulty starting
How to Fix P2303 2017 GMC Sierra
- Begin by diagnosing the specific cause of the low voltage in the ignition coil 2 control circuit using a diagnostic scanner and multimeter.
- Inspect the ignition coil 2, wiring, and connectors for any signs of damage or corrosion. Replace any faulty components.
- Test the power supply to the ignition coil to ensure it is within the specified range.
- Clear the trouble code from the ECM's memory and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnostic testing may be required to identify any underlying issues with the ECM or PCM.
Cost to Fix P2303 2017 GMC Sierra
The cost of repairing the Ignition Coil 2 Control Circuit Low Voltage issue can vary depending on the specific cause of the problem and the labor rates in your area. In general, replacing a faulty ignition coil or repairing damaged wiring may cost between $150 and $300, including parts and labor. However, if the ECM or PCM is found to be at fault, the repair costs can increase significantly. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your vehicle's make and model.
Need more information about the P2303 2017 GMC Sierra code?
Need more information on how to fix the P2303 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2303 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2303 2017 GMC Sierra Code
1. What does the OBDII code P2303 mean on a 2017 GMC Sierra?
P2303 indicates that the ignition coil 2 control circuit is experiencing low voltage, which can affect the engine's performance.
2. What are the common symptoms of code P2303 on a 2017 GMC Sierra?
Symptoms include engine misfires, rough idling, reduced power, poor fuel economy, and the check engine light being illuminated.
3. What causes the P2303 code to appear on my GMC Sierra?
Common causes include a faulty ignition coil, damaged wiring or connectors in the coil 2 circuit, a failing powertrain control module (PCM), or corroded terminals.
4. Can I drive my 2017 GMC Sierra with the P2303 code?
Driving with this code is not recommended as it can lead to engine misfires and potentially damage the catalytic converter over time.
5. How do I diagnose the P2303 code on my GMC Sierra?
Start by inspecting the ignition coil 2 and its wiring for damage or corrosion. Use a multimeter to check voltage and continuity in the circuit. If necessary, test the ignition coil and PCM.
6. What is the most common fix for the P2303 code on a GMC Sierra?
The most common fix is replacing the faulty ignition coil and repairing or replacing any damaged wiring or connectors.
7. How much does it cost to fix the P2303 code on a 2017 GMC Sierra?
The cost can vary, but replacing an ignition coil typically costs $50–$150 for the part, with additional labor costs if done by a mechanic.
8. Can a bad battery cause the P2303 code on a GMC Sierra?
Yes, a weak or failing battery can result in low voltage, potentially triggering this code.
9. How can I prevent the P2303 code from recurring?
Regularly inspect and maintain the ignition system, including coils, wiring, and connectors, and ensure your battery is in good condition.
10. Do I need to clear the code after repairs on my GMC Sierra?
Yes, use an OBDII scanner to clear the code and verify the issue is resolved. If the code returns, further diagnosis may be needed.
Discuss the causes and fixes for P2303 2017 GMC Sierra OBDII Code
Code P2303 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.