P2248 Acura Code - O2 Sensor Reference Voltage Performance Bank 2 Sensor 1
Quick Answer
The O2 Sensor Reference Voltage Performance Bank 2 Sensor 1 diagnostic trouble code (DTC) P2248 in Acura vehicles indicates a potential issue with the oxygen sensor's reference voltage in bank 2 sensor 1. Common causes include Faulty O2 sensor in bank 2 sensor 1, Wiring or connector damage or corrosion, Malfunctioning engine control module (ECU). Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2248 Acura indicates O2 Sensor Reference Voltage Performance Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty O2 sensor in bank 2 sensor 1, Wiring or connector damage or corrosion, Malfunctioning engine control module (ECU).
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2248 Acura Description
The O2 Sensor Reference Voltage Performance Bank 2 Sensor 1 diagnostic trouble code (DTC) P2248 in Acura vehicles indicates a potential issue with the oxygen sensor's reference voltage in bank 2 sensor 1. The oxygen sensor, also known as the O2 sensor, plays a crucial role in monitoring the oxygen content in the exhaust gases, providing feedback to the engine control module (ECU) to adjust the air-fuel mixture for optimal combustion. The reference voltage is the voltage supplied to the O2 sensor for its operation, and any deviation from the expected voltage range can trigger this code.
Common Causes of P2248 Acura
- Faulty O2 sensor in bank 2 sensor 1
- Wiring or connector damage or corrosion
- Malfunctioning engine control module (ECU)
- Issues with the reference voltage supply
- Exhaust leaks near the O2 sensor
Symptoms of P2248 Acura
- Check Engine Light illuminated on the dashboard
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation or lack of power during acceleration
- Increased emissions output
How to Fix P2248 Acura
- Use an OBD-II scanner to retrieve the specific fault code and confirm the diagnosis.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Test the O2 sensor in bank 2 sensor 1 for proper operation and replace if found to be faulty.
- Check the reference voltage supply to ensure it is within the specified range, addressing any issues with the voltage supply.
- Clear the fault code and perform a test drive to verify that the issue has been resolved.
Cost to Fix P2248 Acura
The typical repair costs for addressing the P2248 code in an Acura vehicle can vary depending on the specific cause of the issue. Replacement O2 sensors can range from $50 to $200, while wiring repairs or ECU replacement can add to the overall cost. Labor rates at auto repair shops typically range between $80 and $150 per hour, with the total repair cost likely falling between $150 to $500 or more, including parts and labor. It is advisable to obtain quotes from local auto repair shops to get a more accurate estimate based on your location and vehicle model.
Need more information about the P2248 Acura code?
Need more information on how to fix the P2248 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2248 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2248 Acura Code
1. What does the OBDII code P2248 mean for an Acura?
P2248 indicates an issue with the O2 sensor reference voltage performance for Bank 2, Sensor 1. This typically means the sensor is not receiving or sending the correct reference voltage.
2. What are the common symptoms of P2248 in an Acura?
Common symptoms include a check engine light, decreased fuel efficiency, rough idling, poor engine performance, and possibly increased emissions.
3. What causes the P2248 code on an Acura?
Possible causes include a faulty oxygen sensor (Bank 2, Sensor 1), damaged wiring or connectors, a malfunctioning powertrain control module (PCM), or an exhaust leak near the sensor.
4. Which oxygen sensor is affected by the P2248 code?
The code affects the oxygen sensor on Bank 2, Sensor 1, which is the upstream sensor on the side of the engine opposite Cylinder 1.
5. How do you diagnose the P2248 code on an Acura?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and wiring, checking for exhaust leaks, and testing the sensor's reference voltage and signal output.
6. Can I drive my Acura with the P2248 code?
Driving with this code is not recommended, as it may result in poor performance, increased fuel consumption, and potential damage to the catalytic converter.
7. How do you fix the P2248 code on an Acura?
Repairs may include replacing the oxygen sensor, repairing damaged wiring or connectors, fixing exhaust leaks, or reprogramming or replacing the PCM if necessary.
8. How much does it cost to fix the P2248 code on an Acura?
Repair costs vary but typically range from $200 to $500, depending on whether the oxygen sensor needs replacement or additional repairs are required.
9. Can a dirty air filter cause the P2248 code?
While unlikely, a severely clogged air filter can affect engine performance and sensor readings, so it’s worth inspecting and replacing if necessary.
10. How can I prevent the P2248 code on my Acura?
Regular maintenance, including inspecting and replacing oxygen sensors as needed, checking for exhaust leaks, and keeping wiring in good condition, can help prevent this code.
Discuss the causes and fixes for P2248 Acura OBDII Code
Code P2248 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.