P2247 Mercury Code - O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1
Quick Answer
The P2247 diagnostic trouble code (DTC) for Mercury vehicles indicates an issue with the O2 sensor reference voltage circuit on Bank 2 Sensor 1. Common causes include Faulty O2 Sensor: The most common cause of the P2247 code is a malfunctioning O2 sensor on Bank 2 Sensor 1, Wiring Issues: Damaged or corroded wiring connections can disrupt the reference voltage circuit and trigger the code, ECM Malfunction: A problem with the engine control module (ECM) can prevent the proper voltage signal from reaching the O2 sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2247 Mercury indicates O2 Sensor Reference Voltage Circuit Open Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty O2 Sensor: The most common cause of the P2247 code is a malfunctioning O2 sensor on Bank 2 Sensor 1, Wiring Issues: Damaged or corroded wiring connections can disrupt the reference voltage circuit and trigger the code, ECM Malfunction: A problem with the engine control module (ECM) can prevent the proper voltage signal from reaching the O2 sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2247 Mercury Description
The P2247 diagnostic trouble code (DTC) for Mercury vehicles indicates an issue with the O2 sensor reference voltage circuit on Bank 2 Sensor 1. O2 sensors, also known as oxygen sensors, play a crucial role in monitoring the oxygen levels in the exhaust gases of a vehicle. This particular sensor is located on bank 2 of the engine, which is typically the side that does not contain cylinder number 1. The reference voltage circuit is responsible for providing a stable voltage signal to the O2 sensor to ensure accurate readings.
Common Causes of P2247 Mercury
- Faulty O2 Sensor: The most common cause of the P2247 code is a malfunctioning O2 sensor on Bank 2 Sensor 1.
- Wiring Issues: Damaged or corroded wiring connections can disrupt the reference voltage circuit and trigger the code.
- ECM Malfunction: A problem with the engine control module (ECM) can prevent the proper voltage signal from reaching the O2 sensor.
- Exhaust System Leaks: Leaks in the exhaust system can affect the readings of the O2 sensor, leading to an open circuit error.
- Sensor Placement: Incorrect installation or placement of the O2 sensor can also cause issues with the reference voltage circuit.
Symptoms of P2247 Mercury
- Check Engine Light: The most common symptom associated with the P2247 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A malfunctioning O2 sensor can cause the engine to run rich or lean, resulting in decreased fuel efficiency.
- Rough Idle: The engine may experience rough idling or hesitation when the O2 sensor reference voltage circuit is open.
- Stalling: In severe cases, the vehicle may stall or have difficulty starting due to incorrect air-fuel mixture adjustments.
- Increased Emissions: A faulty O2 sensor can lead to increased emissions, potentially causing the vehicle to fail emissions tests.
How to Fix P2247 Mercury
- Diagnostic: Use a scan tool to retrieve the DTC and pinpoint the exact cause of the issue. Check the wiring connections and inspect the O2 sensor for any visible damage.
- Replace O2 Sensor: If the O2 sensor is faulty, replace Bank 2 Sensor 1 with a new sensor that meets the manufacturer's specifications.
- Repair Wiring: Repair or replace any damaged wiring connections in the O2 sensor reference voltage circuit to ensure a stable voltage signal.
- Reset ECM: Clear the DTC and reset the engine control module (ECM) to ensure that the new sensor is reading accurately and the issue is resolved.
- Test Drive: Take the vehicle for a test drive to ensure that the Check Engine Light does not reappear and that the engine is running smoothly with proper fuel efficiency.
Cost to Fix P2247 Mercury
The cost of repairing the O2 sensor reference voltage circuit open on Bank 2 Sensor 1 can vary depending on the make and model of the vehicle, as well as the location and labor rates of the auto repair shop. Typically, the parts cost for a new O2 sensor can range from $50 to $200, while the labor cost for the repair process can range from $100 to $300. In total, the repair for the P2247 code may cost between $150 and $500, including parts and labor. It is advisable to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the specific vehicle and location.
Need more information about the P2247 Mercury code?
Need more information on how to fix the P2247 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2247 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2247 Mercury Code
What does the OBDII code P2247 mean for a Mercury vehicle?
1. P2247 indicates an issue with the O2 Sensor Reference Voltage Circuit Open for Bank 2 Sensor 1, meaning the sensor is not receiving the proper voltage signal from the ECU. 2.
What are the symptoms of code P2247 in a Mercury vehicle?
Common symptoms include poor fuel economy, rough idling, engine misfires, reduced performance, and the check engine light illuminating. 3.
What causes the P2247 code to appear in Mercury vehicles?
Possible causes include a damaged oxygen sensor, broken or corroded wiring, a faulty ECU, or a poor electrical connection in the O2 sensor circuit. 4.
Which oxygen sensor is affected by P2247 in a Mercury?
P2247 refers to the upstream oxygen sensor (Sensor 1) on Bank 2, which is the side of the engine opposite Bank 1. 5.
Can I drive my Mercury with a P2247 code?
Driving with a P2247 code is not recommended, as it can lead to poor engine performance, increased emissions, and potential damage to other components over time. 6.
How do I diagnose the P2247 code in a Mercury?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and wiring for damage, and testing the reference voltage with a multimeter. 7.
How do I fix the P2247 code on a Mercury vehicle?
Repairs may involve replacing the faulty oxygen sensor, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming or replacing the ECU. 8.
How much does it cost to fix the P2247 code in a Mercury?
Costs vary depending on the issue, but replacing an O2 sensor typically costs $150–$400, while wiring repairs or ECU replacement could be more expensive. 9.
Can I clear the P2247 code without fixing the problem?
Clearing the code without fixing the underlying issue is not recommended, as the code will likely return and the vehicle's performance will not improve. 10.
What tools do I need to troubleshoot the P2247 code in a Mercury?
You’ll need an OBDII scanner, a multimeter for voltage testing, and possibly a wiring diagram for the specific vehicle model.
Discuss the causes and fixes for P2247 Mercury OBDII Code
Code P2247 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.