P2246 Acura Code - O2 Sensor Reference Voltage Circuit High Bank 1 Sensor 1
Quick Answer
The P2246 diagnostic trouble code (DTC) for Acura vehicles indicates an issue with the O2 sensor reference voltage circuit being too high in Bank 1 Sensor 1. Common causes include Faulty O2 sensor, Damaged wiring or connectors in the O2 sensor circuit, Malfunctioning ECM. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2246 Acura indicates O2 Sensor Reference Voltage Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty O2 sensor, Damaged wiring or connectors in the O2 sensor circuit, Malfunctioning ECM.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2246 Acura Description
The P2246 diagnostic trouble code (DTC) for Acura vehicles indicates an issue with the O2 sensor reference voltage circuit being too high in Bank 1 Sensor 1. The oxygen sensor (O2 sensor) is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion.
Common Causes of P2246 Acura
- Faulty O2 sensor
- Damaged wiring or connectors in the O2 sensor circuit
- Malfunctioning ECM
- Power supply issues to the O2 sensor
- Exhaust leaks affecting sensor readings
Symptoms of P2246 Acura
- Decreased fuel efficiency
- Engine misfires or rough idle
- Check Engine Light illuminated
- Reduced engine power
- Increased emissions
How to Fix P2246 Acura
- Use an OBD-II scanner to confirm the P2246 code and diagnose the specific issue.
- Inspect the O2 sensor, wiring, and connectors for any signs of damage or corrosion.
- Test the O2 sensor reference voltage using a multimeter to verify the high voltage reading.
- Replace the faulty O2 sensor or repair any damaged wiring or connectors as needed.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2246 Acura
The cost of repairing a P2246 code can vary depending on the specific cause of the issue and the cost of parts and labor in your area. On average, replacing an O2 sensor can range from $100 to $300, while addressing wiring or connector issues may add to the total cost. Labor rates at auto repair shops typically range from $80 to $150 per hour, so it's advisable to check with local shops for a more accurate estimate based on your vehicle make and model.
Need more information about the P2246 Acura code?
Need more information on how to fix the P2246 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2246 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2246 Acura Code
1. What are the common symptoms of OBDII code P2246 in an Acura related to the O2 Sensor Reference Voltage Circuit High Bank 1 Sensor 1?
- Common symptoms include poor fuel efficiency, rough idling, engine misfires, and potentially a noticeable decrease in engine performance.
2. What typically causes the OBDII code P2246 to trigger in an Acura?
- This code is usually triggered by issues such as a faulty O2 sensor, a damaged wiring harness, or a problem with the engine control module (ECM).
3. How can I diagnose the O2 Sensor Reference Voltage Circuit High Bank 1 Sensor 1 issue in my Acura?
- To diagnose this issue, you can use an OBDII scanner to retrieve the specific fault code, inspect the O2 sensor and its wiring for damage, and test the sensor's voltage output.
4. Can I continue driving my Acura with the P2246 code active?
- It is not recommended to drive your vehicle with the P2246 code active, as it can lead to further damage to the engine and negatively impact fuel efficiency.
5. What are some repair tips for fixing the OBDII code P2246 in my Acura?
- Repair tips include replacing the faulty O2 sensor, repairing or replacing damaged wiring, and resetting the fault code using an OBDII scanner after completing the repairs.
6. Is it possible to reset the OBDII code P2246 in an Acura without fixing the underlying issue?
- While you can reset the code using an OBDII scanner, it is essential to address the underlying problem to prevent the code from reoccurring.
7. How much does it typically cost to repair the O2 Sensor Reference Voltage Circuit High Bank 1 Sensor 1 issue in an Acura?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
8. Can a DIY enthusiast fix the OBDII code P2246 in an Acura?
- While some experienced DIY enthusiasts may be able to address this issue themselves, it is recommended to seek professional help if you are not familiar with automotive repairs involving sensors and wiring.
9. Will fixing the O2 Sensor Reference Voltage Circuit High Bank 1 Sensor 1 problem improve my Acura's performance?
- Yes, addressing this issue can improve your Acura's performance, fuel efficiency, and overall drivability.
10. How long does it take to repair the OBDII code P2246 issue in an Acura?
- The repair time can vary depending on the extent of the problem and the availability of parts, but it typically takes a few hours to complete the necessary repairs.
Discuss the causes and fixes for P2246 Acura OBDII Code
Code P2246 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.