P2245 Ford Code - O2 Sensor Reference Voltage Circuit Low Bank 1 Sensor 1
Quick Answer
The P2245 Ford O2 Sensor Reference Voltage Circuit Low Bank 1 Sensor 1 diagnostic trouble code (DTC) indicates that there is a low voltage condition in the reference circuit for the oxygen sensor located in the exhaust system of the vehicle. Common causes include Faulty oxygen sensor, Wiring or connector issues in the sensor circuit, ECM malfunction. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2245 Ford indicates O2 Sensor Reference Voltage Circuit Low Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty oxygen sensor, Wiring or connector issues in the sensor circuit, ECM malfunction.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2245 Ford Description
The P2245 Ford O2 Sensor Reference Voltage Circuit Low Bank 1 Sensor 1 diagnostic trouble code (DTC) indicates that there is a low voltage condition in the reference circuit for the oxygen sensor located in the exhaust system of the vehicle. This sensor is responsible for monitoring the oxygen content in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. A low reference voltage can lead to inaccurate sensor readings, which can negatively impact engine performance, fuel efficiency, and emissions levels.
Common Causes of P2245 Ford
- Faulty oxygen sensor
- Wiring or connector issues in the sensor circuit
- ECM malfunction
- Exhaust system leaks
- Corrosion or damage to sensor components
Symptoms of P2245 Ford
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Illuminated check engine light
- Failed emissions test
How to Fix P2245 Ford
- Use a scan tool to confirm the P2245 code and identify the specific sensor causing the issue.
- Inspect the wiring and connectors for any damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the oxygen sensor using a multimeter to check for proper voltage output. Replace the sensor if it is faulty.
- Clear the DTC and reset the ECM to see if the code returns after repairs.
- Perform a road test to ensure the issue has been resolved and monitor the oxygen sensor readings for accuracy.
Cost to Fix P2245 Ford
The cost of repairing a P2245 Ford O2 Sensor Reference Voltage Circuit Low Bank 1 Sensor 1 code can vary depending on the specific cause of the issue. In general, replacing an oxygen sensor can range from $100 to $300, including parts and labor. However, if additional repairs or component replacements are necessary, the cost could increase. Diagnostic time and labor rates at auto repair shops can also impact the final cost, so it's recommended to obtain quotes from multiple sources for a more accurate estimate.
Need more information about the P2245 Ford code?
Need more information on how to fix the P2245 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2245 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2245 Ford Code
1. What does the OBDII code P2245 mean on a Ford vehicle?
P2245 indicates an issue with the O2 sensor reference voltage circuit for Bank 1 Sensor 1, specifically that the voltage is lower than expected.
2. What are the common symptoms of a P2245 code?
Symptoms may include the check engine light turning on, poor fuel economy, rough idling, hesitation during acceleration, or increased emissions.
3. What causes the P2245 code on a Ford?
Common causes include a faulty oxygen sensor, damaged wiring or connectors in the circuit, a malfunctioning powertrain control module (PCM), or corrosion in the electrical connections.
4. Which sensor is affected by the P2245 code?
Bank 1 Sensor 1 refers to the upstream oxygen sensor located before the catalytic converter on the side of the engine with cylinder 1.
5. Is it safe to drive with a P2245 code?
Driving with this code is generally not recommended as it may lead to reduced engine performance, higher emissions, and potential damage to the catalytic converter.
6. How do I diagnose a P2245 code?
Diagnosis involves inspecting the oxygen sensor and wiring for damage, testing the reference voltage with a multimeter, and using a scan tool to monitor sensor data.
7. Can a P2245 code be caused by a bad PCM?
While rare, a malfunctioning PCM can cause the P2245 code if it fails to provide the correct reference voltage to the oxygen sensor.
8. How do I fix the P2245 code on my Ford?
Repairs may include replacing the oxygen sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the PCM if necessary.
9. How much does it cost to fix a P2245 code?
The cost can vary, but replacing an oxygen sensor typically costs $150–$300, while wiring repairs or PCM replacement may be more expensive depending on the extent of the issue.
10. Can a vacuum leak cause the P2245 code?
A vacuum leak is unlikely to directly cause P2245, but it could affect engine performance and sensor readings, potentially contributing to related issues.
Discuss the causes and fixes for P2245 Ford OBDII Code
Code P2245 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.