Engine-Codes.com
Engine-Codes – Scion – P2240 Scion

P2240 Scion Code - A/F Sensor Bank 2 Open Circuit

Quick Answer

The P2240 code for Scion indicates that there is an open circuit in the A/F (Air/Fuel) sensor located in Bank 2 of the vehicle's exhaust system. Common causes include Faulty A/F sensor in Bank 2, Loose or damaged wiring/connectors in the sensor circuit, Corrosion or buildup on sensor connections. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P2240 Scion indicates A/F Sensor Bank 2 Open Circuit.
Common causes
Common causes include Faulty A/F sensor in Bank 2, Loose or damaged wiring/connectors in the sensor circuit, Corrosion or buildup on sensor connections.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
What is this?
Table of contents Created and updated by William Orellana on Aug 19, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2240 Scion Description

The P2240 code for Scion indicates that there is an open circuit in the A/F (Air/Fuel) sensor located in Bank 2 of the vehicle's exhaust system. The A/F sensor is responsible for monitoring the air-to-fuel ratio in the exhaust gases and sending this data to the engine control module (ECM). An open circuit in the sensor can disrupt this communication, leading to potential issues with the engine's performance, fuel efficiency, and emissions output.

OBDII Code P2240 Scion - A/F Sensor Bank 2 Open Circuit
P2240 Scion Code - A/F Sensor Bank 2 Open Circuit

Common Causes of P2240 Scion

  1. Faulty A/F sensor in Bank 2
  2. Loose or damaged wiring/connectors in the sensor circuit
  3. Corrosion or buildup on sensor connections
  4. Exhaust leaks near the sensor
  5. ECM software issues

Symptoms of P2240 Scion

  1. Decreased fuel efficiency
  2. Rough idling or stalling
  3. Check Engine Light illuminated
  4. Increased emissions output
  5. Engine misfires

How to Fix P2240 Scion

  1. Use a diagnostic scanner to confirm the P2240 code and pinpoint the issue in Bank 2.
  2. Inspect the A/F sensor and its wiring for any visible damage or corrosion.
  3. Test the sensor's resistance and voltage output to determine if it is functioning properly.
  4. Replace the A/F sensor in Bank 2 if it is found to be faulty.
  5. Clear the code from the ECM and perform a test drive to confirm the issue has been resolved.

Cost to Fix P2240 Scion

The cost of repairing a P2240 code for a Scion can vary depending on the specific model and year of the vehicle, as well as the labor rates in your area. On average, replacing an A/F sensor in Bank 2 can cost between $200 and $400, including parts and labor. Additionally, diagnostic time and labor rates at auto repair shops can range from $80 to $150 per hour, so it's recommended to check with local shops for an accurate estimate.

Need more information about the P2240 Scion code?

Need more information on how to fix the P2240 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2240 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2240 Scion Code

1. What does the OBDII code P2240 mean on a Scion?

P2240 indicates an "A/F Sensor Bank 2 Open Circuit," which means the engine control module (ECM) has detected an open or malfunction in the air-fuel ratio (A/F) sensor circuit for Bank 2.

2. What are common symptoms of a P2240 code on a Scion?

Symptoms may include reduced fuel efficiency, poor engine performance, rough idling, hesitation during acceleration, and an illuminated Check Engine Light.

3. What causes the P2240 code to appear in a Scion?

Common causes include a faulty A/F sensor, damaged or corroded wiring, a loose or disconnected sensor connector, or issues with the ECM.

4. Is it safe to drive my Scion with the P2240 code?

While the vehicle may still be drivable, ignoring the code can lead to poor fuel economy, increased emissions, and potential damage to other components like the catalytic converter.

5. How do I diagnose the P2240 code on my Scion?

Start by inspecting the A/F sensor wiring and connectors for damage or corrosion. Use a multimeter to check for continuity in the circuit and verify the sensor's functionality. A scan tool can also provide live data for further analysis.

6. Can a faulty A/F sensor trigger the P2240 code?

Yes, a malfunctioning air-fuel ratio sensor is one of the most common causes of this code.

7. What is Bank 2 in the context of the P2240 code?

Bank 2 refers to the side of the engine opposite Bank 1, typically the side that does not contain cylinder 1 in a V-engine layout.

8. How do I fix the P2240 code on a Scion?

Repairs may involve replacing the A/F sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming the ECM if necessary.

9. How much does it cost to repair a P2240 code on a Scion?

The cost depends on the specific issue but generally ranges from $200 to $500, including diagnostic and replacement costs for the A/F sensor if needed.

10. Can a vacuum leak cause the P2240 code?

A vacuum leak is not a direct cause of P2240, but it may contribute to air-fuel ratio issues, potentially affecting sensor readings and triggering related codes.

Discuss the causes and fixes for P2240 Scion OBDII Code

Submit a New Comment

Code P2240 Scion comments

No comments found for this page.