P2240 Honda Code - Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage
Quick Answer
The P2240 diagnostic trouble code for Honda vehicles indicates an issue with the Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage. Common causes include Faulty front air/fuel ratio sensor, Damaged sensor wiring or connectors, Engine vacuum leak. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2240 Honda indicates Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage.
- Common causes
- Common causes include Faulty front air/fuel ratio sensor, Damaged sensor wiring or connectors, Engine vacuum leak.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2240 Honda Description
The P2240 diagnostic trouble code for Honda vehicles indicates an issue with the Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage. This sensor is responsible for monitoring the air-fuel mixture in the exhaust system and providing feedback to the engine control module (ECM) to ensure optimal fuel delivery for combustion. When the voltage readings from this sensor are too high, it can indicate a potential problem with the sensor itself, the wiring, or the engine system.
Common Causes of P2240 Honda
- Faulty front air/fuel ratio sensor
- Damaged sensor wiring or connectors
- Engine vacuum leak
- Exhaust system leaks
- ECM software issues
Symptoms of P2240 Honda
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation or lack of power during acceleration
- Engine misfires
- Illuminated check engine light
How to Fix P2240 Honda
- Use an OBD-II scanner to retrieve the specific trouble code and confirm the diagnosis.
- Inspect the front air/fuel ratio sensor, wiring, and connectors for any visible damage or wear.
- Test the sensor's voltage output using a multimeter to determine if it is functioning within specifications.
- Replace the front air/fuel ratio sensor if it is found to be faulty, ensuring proper installation and calibration.
- Clear the trouble code from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P2240 Honda
The cost of repairing a Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage issue can vary depending on the specific vehicle make and model, as well as the location and labor rates of the auto repair shop. On average, the parts for this repair can range from $100 to $300, with labor costs adding an additional $100 to $200. Overall, the total repair cost can amount to approximately $200 to $500. It is recommended to consult with a trusted mechanic or dealership for a more accurate estimate based on your specific vehicle and location.
Tech Notes for P2240 Honda
2003–2005 Honda Accord V6s
2005 Honda Odysseys
2005 Honda Pilots
2006 Honda Ridgelines
To fix this problem, check the sensor wiring and connections for damage. If the sensor circuit is OK, and the DTC(s) come back after clearing them and doing a short test-drive, replace the A/F sensor. The replacement A/F sensors in Honda parts stock are an improved version over the original sensor.
When is the Code Detected?
Need more information about the P2240 Honda code?
Need more information on how to fix the P2240 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2240 Honda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2240 Honda Code
No Frequently Asked Questions about P2240 Honda Code found.
Discuss the causes and fixes for P2240 Honda OBDII Code
-
I have a 2004 V6 Honda Accord. I originally had two codes - P0154 and P2240. I looked at the front O2 sensor in the exhaust just behind the radiator and saw some green stiff in the connector. I cleaned with some alcohol and the P0154 code went away. I am still having the P2240 code. What do I do next. I understand there is a second front sensor. Where do I find it? Thanks for your help.
-
You don't need to look at the other sensor, because both codes are for the same sensor. The sensor you clean the connector. More than likely you have to replace the sensor to fix the problem, it's a very common problem.
P2240 Honda - Front Air/Fuel Ratio Sensor Bank 2 Sensor 1 IP Line High Voltage
Read more: https://www.autocodes.com/p22...
P0154 Honda - Front Air/Fuel Ratio Sensor Bank 2 Sensor 1
Read more: https://www.autocodes.com/p01...
-
I have this code on my 2004 Accord v6. I replaced the sensor and the code went away for a couple weeks. Now the code is back and I can tell my gas mileage is down. What's next?
-
Did you use a factory sensor?
If you did use factory sensor, then the next step is to check for intake leaks or leaking injectors, also make sure the sensor connector is clean.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.