P2228 Chrysler Code - Barometric Pressure Sensor 'A' Circuit Low
Quick Answer
The P2228 code for Chrysler vehicles indicates a problem with the Barometric Pressure Sensor 'A' Circuit, specifically that the sensor is reading a lower than expected voltage. Common causes include Faulty barometric pressure sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2228 Chrysler indicates Barometric Pressure Sensor 'A' Circuit Low.
- Common causes
- Common causes include Faulty barometric pressure sensor, Damaged wiring or connectors in the sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2228 Chrysler Description
The P2228 code for Chrysler vehicles indicates a problem with the Barometric Pressure Sensor 'A' Circuit, specifically that the sensor is reading a lower than expected voltage. The barometric pressure sensor is responsible for measuring the atmospheric pressure outside the vehicle and providing this information to the engine control module (ECM). This data is crucial for the ECM to calculate the correct air-fuel mixture for optimal engine performance and emissions control.
Common Causes of P2228 Chrysler
- Faulty barometric pressure sensor
- Damaged wiring or connectors in the sensor circuit
- ECM malfunction
- Corrosion or water damage in the sensor or circuit
Symptoms of P2228 Chrysler
- Poor fuel efficiency
- Rough idling
- Hesitation during acceleration
- Engine stalling
- Failed emissions tests
How to Fix P2228 Chrysler
- Begin by conducting a visual inspection of the sensor, wiring, and connectors for any obvious signs of damage or corrosion.
- Use a multimeter to test the voltage output of the barometric pressure sensor to determine if it is within the specified range.
- If the sensor is faulty, replace it with a new OEM sensor to ensure accurate readings.
- Check and repair any damaged wiring or connectors in the sensor circuit.
- Clear the diagnostic trouble codes (DTCs) from the ECM using a scan tool and perform a test drive to ensure the issue has been resolved.
Cost to Fix P2228 Chrysler
The typical repair costs for addressing the P2228 code can vary depending on the specific cause of the issue. On average, replacing the barometric pressure sensor can cost between $100 and $200, while addressing wiring or connector issues may range from $50 to $150. Labor costs at auto repair shops typically range from $80 to $150 per hour. It's advisable to check with local repair shops for a more accurate estimate based on your vehicle make and model.
Need more information about the P2228 Chrysler code?
Need more information on how to fix the P2228 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2228 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2228 Chrysler Code
1. What are the common symptoms of OBDII code P2228 in a Chrysler vehicle?
- Common symptoms include poor engine performance, reduced fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P2228 in a Chrysler indicate?
- The code P2228 indicates a low circuit voltage in the Barometric Pressure Sensor 'A' in the Chrysler vehicle.
3. What are the possible causes of OBDII code P2228 in a Chrysler?
- Potential causes include a faulty barometric pressure sensor, damaged wiring or connectors, or issues with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P2228 in my Chrysler?
- You can diagnose the issue by performing a visual inspection of the sensor and its connections, testing the sensor's voltage, and using a scan tool to gather data from the ECM.
5. Can I continue to drive my Chrysler with OBDII code P2228?
- It is not recommended to continue driving with the code present, as it can lead to further engine damage and reduced performance.
6. How can I repair OBDII code P2228 in my Chrysler?
- Repair options may include replacing the barometric pressure sensor, repairing damaged wiring or connectors, or reprogramming the ECM.
7. Will resetting the check engine light resolve OBDII code P2228 in my Chrysler?
- Resetting the check engine light may temporarily turn it off, but the underlying issue causing the code will still need to be addressed to prevent it from reoccurring.
8. How much does it typically cost to repair OBDII code P2228 in a Chrysler?
- The cost of repairing OBDII code P2228 can vary depending on the specific cause, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P2228 in a Chrysler?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to replace the barometric pressure sensor or check wiring connections, but more complex repairs may require professional assistance.
10. How long does it take to repair OBDII code P2228 in a Chrysler?
- The repair time can vary based on the cause of the code and the complexity of the fix, but it typically takes a few hours to complete the repair.
Discuss the causes and fixes for P2228 Chrysler OBDII Code
Code P2228 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.