P2185 Dodge Code - Engine Coolant Temperature Sensor 2 Circuit High
Quick Answer
The P2185 diagnostic trouble code (DTC) for Dodge vehicles indicates that there is a problem with the Engine Coolant Temperature Sensor 2 Circuit being too high. Common causes include Faulty Engine Coolant Temperature Sensor, Wiring issues or electrical connection problems, Air pockets or low coolant level in the cooling system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2185 Dodge indicates Engine Coolant Temperature Sensor 2 Circuit High.
- Common causes
- Common causes include Faulty Engine Coolant Temperature Sensor, Wiring issues or electrical connection problems, Air pockets or low coolant level in the cooling system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2185 Dodge Description
The P2185 diagnostic trouble code (DTC) for Dodge vehicles indicates that there is a problem with the Engine Coolant Temperature Sensor 2 Circuit being too high. The engine coolant temperature sensor is a crucial component of the vehicle's engine management system, as it monitors the temperature of the engine coolant and provides this information to the engine control module (ECM). The ECM uses this data to adjust fuel delivery and ignition timing to ensure optimal engine performance, efficiency, and emissions control.
Common Causes of P2185 Dodge
- Faulty Engine Coolant Temperature Sensor
- Wiring issues or electrical connection problems
- Air pockets or low coolant level in the cooling system
- Cooling fan not functioning properly
- Thermostat stuck closed
Symptoms of P2185 Dodge
- Check engine light illuminated on the dashboard
- Engine running hotter than usual
- Decreased fuel efficiency
- Engine misfires or rough idle
- Poor acceleration or power loss
How to Fix P2185 Dodge
- Begin by diagnosing the issue using a scan tool to confirm the P2185 code and check the live data from the Engine Coolant Temperature Sensor.
- Inspect the sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
- Check the coolant level and bleed any air pockets from the cooling system. Ensure the cooling fan is working properly.
- Test the thermostat to see if it is stuck closed. Replace it if needed.
- Clear the DTC and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P2185 Dodge
The cost of repairing a P2185 Engine Coolant Temperature Sensor 2 Circuit High code can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of replacing the sensor itself can range from $50 to $150, while additional costs for parts and labor may bring the total repair bill to around $150 to $300. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to get a detailed estimate before proceeding with the repair.
Need more information about the P2185 Dodge code?
Need more information on how to fix the P2185 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2185 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2185 Dodge Code
1. What does the OBDII code P2185 mean for a Dodge vehicle?
P2185 indicates that the Engine Coolant Temperature (ECT) Sensor 2 is reporting a high voltage signal, suggesting a possible fault in the sensor or its circuit.
2. What are the symptoms of the P2185 code in a Dodge?
Common symptoms include overheating, poor fuel efficiency, engine misfires, difficulty starting, and the check engine light being illuminated.
3. What causes the P2185 code to appear?
Causes may include a faulty ECT sensor, damaged or corroded wiring, a bad electrical connection, or issues with the engine control module (ECM).
4. Can I drive my Dodge with a P2185 code?
Driving with a P2185 code is not recommended, as it can lead to engine overheating or other performance issues that may cause further damage.
5. How do I fix the P2185 code on my Dodge?
Repairs may involve replacing the ECT sensor, repairing or replacing damaged wiring, cleaning corroded connections, or reprogramming the ECM if necessary.
6. Where is the Engine Coolant Temperature Sensor 2 located in a Dodge?
The ECT Sensor 2 is typically located near the thermostat housing or on the engine block, depending on the Dodge model.
7. How much does it cost to repair a P2185 code in a Dodge?
Repair costs can range from $50 to $300, depending on whether the issue is with the sensor, wiring, or other components.
8. Can a bad thermostat cause the P2185 code?
While a bad thermostat is not a direct cause, it can contribute to abnormal temperature readings that may trigger this code.
9. How is the P2185 code diagnosed in a Dodge?
Diagnosis includes scanning the ECM, inspecting the ECT sensor and wiring, checking for correct voltage signals, and testing the cooling system components.
10. Will clearing the code fix the P2185 issue?
Clearing the code will reset the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2185 Dodge OBDII Code
Code P2185 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.