Engine-CodesChrysler – P2172 Chrysler

P2172 Chrysler Code - High Air Flow/ Vacuum Leak Detected Instantaneous Accumulation

Quick Answer

The P2172 Chrysler code indicates that a high air flow or vacuum leak has been detected in the intake system of the vehicle. Common causes include Cracked or disconnected vacuum hose, Faulty intake manifold gasket, Malfunctioning mass air flow sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2172 Chrysler indicates High Air Flow/ Vacuum Leak Detected Instantaneous Accumulation.
Common causes
Common causes include Cracked or disconnected vacuum hose, Faulty intake manifold gasket, Malfunctioning mass air flow sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P2172 Chrysler Description

The P2172 Chrysler code indicates that a high air flow or vacuum leak has been detected in the intake system of the vehicle. This means that there is an instantaneous accumulation of air in the system that is not accounted for by the engine control module. This issue can negatively impact the vehicle's performance, fuel efficiency, and emissions output.

OBDII Code P2172 Chrysler - High Air Flow/ Vacuum Leak Detected Instantaneous Accumulation
P2172 Chrysler Code - High Air Flow/ Vacuum Leak Detected Instantaneous Accumulation

Common Causes of P2172 Chrysler

  1. Cracked or disconnected vacuum hose
  2. Faulty intake manifold gasket
  3. Malfunctioning mass air flow sensor
  4. Problem with the throttle body
  5. Vacuum leak in the intake system

Symptoms of P2172 Chrysler

  1. Rough idle or stalling
  2. Reduced power and acceleration
  3. Increased fuel consumption
  4. Check Engine Light illuminated
  5. Hissing or whistling noise from the engine

How to Fix P2172 Chrysler

  1. Perform a visual inspection of the vacuum hoses and intake manifold gasket for any cracks or leaks.
  2. Test the mass air flow sensor and throttle body for proper operation and cleanliness.
  3. Use a smoke machine to detect any vacuum leaks in the intake system.
  4. Replace any damaged or faulty components, such as vacuum hoses, gaskets, sensors, or throttle body.
  5. Clear the fault code and perform a test drive to ensure the issue has been resolved.

Cost to Fix P2172 Chrysler

The typical repair costs for addressing a high air flow or vacuum leak detected code can range from $100 to $500, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is advisable to check local rates for a more precise estimate.

When is the Code Detected?

Based on calculated MAP, either both of the TP sensors have failed or the engine has a large vacuum leak.

Need more information about the P2172 Chrysler code?

Need more information on how to fix the P2172 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2172 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2172 Chrysler Code

No Frequently Asked Questions about P2172 Chrysler Code found.

Discuss the causes and fixes for P2172 Chrysler OBDII Code

  • I have this code. I changed the throttle body, Mass airflow sensor, and the battery. It was still stalling. So I brought it to the dealership. The said they did the PCM update. I am a girl and I am not sure if the mechanic was giving me a hard time because he didn’t think I knew what was going on but I asked him if he can check the MAP sensor and vacuum leaks. He said he checked the sensor already and it’s fine. He rolled his eyes about having to check the vacuum lines and said that wouldn’t be it. He claimed he checked them and they were fine. I get home and the car stalled again. I am so frustrated!!

  • I'm sorry you are having those problems; I know how frustrating that can be. Let me check if I can find more information for you. What model, year and engine size is your vehicle?