P2170 Code - Exhaust Pressure Regulator Vent Solenoid Control Circuit Low
Quick Answer
The P2170 diagnostic trouble code (DTC) refers to the Exhaust Pressure Regulator Vent Solenoid Control Circuit Low. Common causes include Faulty Exhaust Pressure Regulator Vent Solenoid: The solenoid itself may be malfunctioning, causing the control circuit to read low voltage, Wiring Issues: Problems with the wiring connecting the solenoid to the vehicle's electrical system can lead to a low voltage reading, Corrosion or Poor Connection: Corrosion or a poor connection at the solenoid or in the wiring harness can disrupt the flow of voltage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2170 indicates Exhaust Pressure Regulator Vent Solenoid Control Circuit Low.
- Common causes
- Common causes include Faulty Exhaust Pressure Regulator Vent Solenoid: The solenoid itself may be malfunctioning, causing the control circuit to read low voltage, Wiring Issues: Problems with the wiring connecting the solenoid to the vehicle's electrical system can lead to a low voltage reading, Corrosion or Poor Connection: Corrosion or a poor connection at the solenoid or in the wiring harness can disrupt the flow of voltage.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2170 Description
The P2170 diagnostic trouble code (DTC) refers to the Exhaust Pressure Regulator Vent Solenoid Control Circuit Low. This code indicates that there is an issue with the control circuit for the exhaust pressure regulator vent solenoid, which is responsible for regulating the pressure in the exhaust system. The exhaust pressure regulator vent solenoid helps to control emissions and optimize engine performance by adjusting the exhaust gas recirculation (EGR) system. When the control circuit is reading a low voltage, it can lead to improper functioning of the solenoid, affecting the vehicle's emissions and performance.
Common Causes of P2170
- Faulty Exhaust Pressure Regulator Vent Solenoid: The solenoid itself may be malfunctioning, causing the control circuit to read low voltage.
- Wiring Issues: Problems with the wiring connecting the solenoid to the vehicle's electrical system can lead to a low voltage reading.
- Corrosion or Poor Connection: Corrosion or a poor connection at the solenoid or in the wiring harness can disrupt the flow of voltage.
- ECM/PCM Malfunction: A malfunction in the engine control module or powertrain control module can also trigger this code.
Symptoms of P2170
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in engine performance, such as reduced power or acceleration.
- Increased Emissions: A malfunction in the exhaust pressure regulator vent solenoid can lead to increased emissions from the vehicle.
- Rough Idling: The engine may idle roughly or inconsistently due to the improper regulation of exhaust pressure.
- Failed Emissions Test: If the issue is not addressed, it could potentially cause the vehicle to fail emissions testing.
How to Fix P2170
- Diagnose the Issue: Use a diagnostic scanner to read the trouble code and pinpoint the exact cause of the problem.
- Inspect Wiring and Connections: Check the wiring and connections related to the exhaust pressure regulator vent solenoid for any damage or corrosion.
- Test Exhaust Pressure Regulator Vent Solenoid: Test the solenoid itself to determine if it is functioning properly.
- Replace Solenoid or Repair Wiring: If the solenoid is faulty, replace it with a new one. If the issue lies with the wiring, repair or replace the damaged wiring.
- Clear Codes and Test Drive: After the repair is completed, clear the trouble codes from the vehicle's memory and take the car for a test drive to ensure the issue has been resolved.
Cost to Fix P2170
The cost to repair a P2170 code can vary depending on the cause of the issue and the specific vehicle. Typically, the parts required for this repair, such as a new exhaust pressure regulator vent solenoid, can range from $50 to $150. Labor costs can add another $80 to $150 per hour, and the total repair cost could be anywhere from $150 to $400. It's important to note that these are rough estimates, and actual costs may vary based on factors such as location, vehicle make and model, and the mechanic's rates.
Need more information about the P2170 code?
Need more information on how to fix the P2170 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2170 code diagnosed by a professional: Find a repair shop in your area
Code P2170 Information for Specific Makes
- P2170 Dodge — Exhaust Pressure Regulator Vent Solenoid Control Circuit Low
Frequently Asked Questions about P2170 Code
No Frequently Asked Questions about P2170 Code found.
Discuss the causes and fixes for P2170 OBDII Code
Code P2170 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.