P216E 2017 GMC Sierra Code - Cylinder 6 Injector High Control Circuit Low Voltage
Quick Answer
The diagnostic trouble code P216E for a 2017 GMC Sierra indicates an issue with the Cylinder 6 Injector High Control Circuit Low Voltage. Common causes include Faulty fuel injector, Wiring issue in the injector control circuit, Damaged connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P216E 2017 GMC Sierra indicates Cylinder 6 Injector High Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty fuel injector, Wiring issue in the injector control circuit, Damaged connector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P216E 2017 GMC Sierra Description
The diagnostic trouble code P216E for a 2017 GMC Sierra indicates an issue with the Cylinder 6 Injector High Control Circuit Low Voltage. This means that there is a problem with the injector control circuit for the fuel injector in cylinder 6 of the engine. The fuel injector is responsible for delivering the precise amount of fuel into the combustion chamber at the right time for optimal engine performance. When the control circuit voltage is low, it can lead to issues with fuel delivery, which can have a significant impact on the vehicle's performance.
Common Causes of P216E 2017 GMC Sierra
- Faulty fuel injector
- Wiring issue in the injector control circuit
- Damaged connector
- Problem with the engine control module (ECM)
- Electrical issues such as a short circuit or a bad ground connection
Symptoms of P216E 2017 GMC Sierra
- Rough idling
- Misfiring
- Hesitation or lack of power during acceleration
- Decreased fuel efficiency
- Engine stalling
How to Fix P216E 2017 GMC Sierra
- Diagnose the specific cause by performing a thorough inspection of the injector control circuit, fuel injector, wiring, and connectors.
- Test the fuel injector to determine if it is functioning correctly or needs to be replaced.
- Check the wiring and connectors for any damage or corrosion, repairing or replacing them as necessary.
- Verify the ECM operation and reprogram if needed.
- Clear the trouble code from the vehicle's computer and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P216E 2017 GMC Sierra
The typical repair costs for addressing a Cylinder 6 Injector High Control Circuit Low Voltage issue can vary depending on the specific cause and the parts needed for the repair. In general, the cost can range from $200 to $500 for parts and labor. However, it is essential to note that diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is recommended to check with local repair shops for a more accurate estimate. Labor rates typically range between $80 and $150 per hour, but rates may be higher in metropolitan areas or at dealerships and lower at independent shops.
Need more information about the P216E 2017 GMC Sierra code?
Need more information on how to fix the P216E 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P216E 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P216E 2017 GMC Sierra Code
1. What does the OBDII code P216E mean on a 2017 GMC Sierra?
P216E indicates a problem with the Cylinder 6 Injector High Control Circuit, specifically a low voltage condition.
2. What are the common symptoms of code P216E in a 2017 GMC Sierra?
Symptoms include rough idling, reduced engine performance, misfires in cylinder 6, and possibly the check engine light illuminating.
3. What causes the P216E code to appear on a GMC Sierra?
Common causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a failing injector driver module, or a malfunctioning ECM.
4. Can I drive my 2017 GMC Sierra with a P216E code?
Driving with this code is not recommended, as it can lead to further engine damage or reduced fuel efficiency due to improper cylinder performance.
5. How do I diagnose the P216E code on my GMC Sierra?
Start by inspecting the wiring and connectors for cylinder 6's fuel injector. Use a multimeter to check for proper voltage, and test the injector for continuity and functionality.
6. What tools are needed to fix the P216E code?
You may need a multimeter, OBDII scanner, fuel injector tester, and basic hand tools to inspect and repair the issue.
7. How much does it cost to repair a P216E code on a GMC Sierra?
Repair costs vary but can range from $150 to $400+ depending on whether the injector, wiring, or module needs replacement.
8. Is the P216E code related to other engine codes?
Yes, it can appear alongside misfire codes (P0306) or other injector circuit codes if multiple cylinders are affected.
9. Can a dirty fuel injector cause the P216E code?
While uncommon, a dirty or clogged injector may lead to improper operation and trigger the code. Cleaning the injector could help in such cases.
10. How can I prevent the P216E code from recurring?
Regular maintenance, such as inspecting wiring, using high-quality fuel, and cleaning the injectors, can help prevent injector circuit issues.
Discuss the causes and fixes for P216E 2017 GMC Sierra OBDII Code
Code P216E 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.