P2164 Dodge Code - Throttle/Pedal Position Sensor 'B' Maximum Stop Performance
Quick Answer
The P2164 diagnostic trouble code for Dodge vehicles indicates an issue with the Throttle/Pedal Position Sensor 'B' Maximum Stop Performance. Common causes include Faulty throttle position sensor, Wiring or connector issues, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2164 Dodge indicates Throttle/Pedal Position Sensor 'B' Maximum Stop Performance.
- Common causes
- Common causes include Faulty throttle position sensor, Wiring or connector issues, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2164 Dodge Description
The P2164 diagnostic trouble code for Dodge vehicles indicates an issue with the Throttle/Pedal Position Sensor 'B' Maximum Stop Performance. This sensor is a crucial component of the vehicle's electronic throttle control system, which is responsible for regulating the amount of air entering the engine to control its speed and performance. The sensor works by measuring the position of the throttle pedal and sending this information to the engine control module (ECM) to adjust the throttle accordingly.
Common Causes of P2164 Dodge
- Faulty throttle position sensor
- Wiring or connector issues
- ECM malfunction
- Corrosion or damage to sensor components
- Electrical interference or short circuits
Symptoms of P2164 Dodge
- Sluggish acceleration
- Delayed throttle response
- Engine stalling
- Vehicle going into "limp mode"
- Reduced power while driving
How to Fix P2164 Dodge
- Perform a thorough diagnostic scan to confirm the P2164 code and pinpoint the exact cause of the issue.
- Inspect the throttle position sensor, wiring, and connectors for any signs of damage or corrosion.
- Test the sensor's functionality using a multimeter to determine if it is operating within the manufacturer's specifications.
- Replace the faulty throttle position sensor if necessary and retest the system to ensure proper functionality.
- Clear the diagnostic trouble codes from the ECM and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P2164 Dodge
The typical repair costs for addressing a Throttle/Pedal Position Sensor 'B' Maximum Stop Performance issue can vary depending on the specific cause of the problem and the parts and labor involved. In general, replacing a faulty throttle position sensor can cost anywhere from $100 to $300, including parts and labor. Additional costs may be incurred if wiring repairs or ECM reprogramming are necessary.
Need more information about the P2164 Dodge code?
Need more information on how to fix the P2164 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2164 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2164 Dodge Code
1. What does the OBDII code P2164 mean for a Dodge vehicle?
P2164 indicates an issue with the Throttle/Pedal Position Sensor 'B', specifically that the maximum stop position is not performing within expected parameters.
2. What are common symptoms of the P2164 code on a Dodge?
Symptoms may include poor throttle response, reduced engine power, stalling, or the check engine light turning on.
3. What causes the P2164 code to appear on a Dodge?
Common causes include a faulty throttle/pedal position sensor, damaged wiring or connectors, or issues with the throttle body assembly.
4. Can I drive my Dodge with the P2164 code active?
Driving with the P2164 code is possible but not recommended, as reduced throttle response and potential stalling could pose safety risks.
5. How do you diagnose the P2164 code on a Dodge?
Diagnosis typically involves using a scan tool to confirm the code, inspecting the throttle/pedal position sensor, checking for damaged wiring, and testing the throttle body.
6. How do you fix the P2164 code on a Dodge vehicle?
Repairs may involve replacing the throttle/pedal position sensor, repairing or replacing damaged wiring, or cleaning or replacing the throttle body.
7. What tools are needed to fix the P2164 code on a Dodge?
Tools may include a basic OBDII scanner, multimeter for testing circuits, and appropriate hand tools to remove and replace components.
8. Can cleaning the throttle body resolve the P2164 code on a Dodge?
Yes, in some cases, cleaning a dirty throttle body may resolve the issue if the sensor or throttle body movement is obstructed by debris.
9. How much does it cost to repair the P2164 code on a Dodge?
Repair costs vary, but replacing the throttle/pedal position sensor can range from $100 to $250, depending on labor and part prices.
10. Is the P2164 code related to other throttle position sensor codes?
Yes, P2164 might accompany other codes related to the throttle or pedal position sensors, indicating a broader throttle control issue.
Discuss the causes and fixes for P2164 Dodge OBDII Code
Code P2164 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.