P213B Code - Exhaust Gas Recirculation Throttle Control Circuit 'B' Range/Performance
Quick Answer
The P213B code indicates a problem with the Exhaust Gas Recirculation (EGR) Throttle Control Circuit 'B', specifically relating to a range/performance issue. Common causes include Faulty EGR throttle control circuit wiring, Malfunctioning EGR valve, Clogged EGR passage. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P213B indicates Exhaust Gas Recirculation Throttle Control Circuit 'B' Range/Performance.
- Common causes
- Common causes include Faulty EGR throttle control circuit wiring, Malfunctioning EGR valve, Clogged EGR passage.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P213B Description
The P213B code indicates a problem with the Exhaust Gas Recirculation (EGR) Throttle Control Circuit 'B', specifically relating to a range/performance issue. The EGR system is designed to reduce nitrogen oxide emissions by recirculating a portion of the exhaust gases back into the engine's intake system. The throttle control circuit 'B' is responsible for regulating the EGR valve's position and ensuring proper flow of exhaust gases into the intake manifold.
Common Causes of P213B
- Faulty EGR throttle control circuit wiring
- Malfunctioning EGR valve
- Clogged EGR passage
- Electronic Control Module (ECM) issues
- Corrosion or poor connections in the EGR system components
Symptoms of P213B
- Check Engine Light illuminated
- Reduced engine performance
- Rough idle or stalling
- Increased fuel consumption
- Emissions test failure
How to Fix P213B
- Diagnose the specific cause of the P213B code using a scan tool to pinpoint the issue within the EGR system.
- Inspect the EGR throttle control circuit wiring for any breaks, frays, or loose connections. Repair or replace any damaged wiring.
- Check the EGR valve for proper operation and clean or replace it if necessary.
- Inspect the EGR passage for any blockages or carbon buildup and clean it out to ensure proper flow of exhaust gases.
- Test the ECM to ensure it is sending the correct signals to the EGR system and replace if faulty.
Cost to Fix P213B
The cost of repairing a P213B code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. On average, the repair costs for this issue can range from $200 to $500, including parts and labor. It's important to note that diagnosis time and labor rates can vary based on location, vehicle make and model, and engine type. It is recommended to obtain quotes from local auto repair shops for a more accurate estimate.
Need more information about the P213B code?
Need more information on how to fix the P213B code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P213B code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P213B Code
1. What are the common symptoms of OBDII code P213B?
- Common symptoms include reduced engine performance, rough idling, stalling, and possibly an illuminated Check Engine Light.
2. What are the possible causes of OBDII code P213B?
- The code P213B can be triggered by issues such as a faulty EGR throttle control sensor, wiring problems, a malfunctioning EGR valve, or a problem with the EGR system.
3. How can I diagnose the cause of OBDII code P213B?
- Diagnosing the code typically involves using a diagnostic scanner to retrieve the trouble codes, checking the EGR throttle control sensor and wiring for faults, and performing a thorough inspection of the EGR system components.
4. Can I drive my vehicle with OBDII code P213B?
- It is not recommended to drive your vehicle with code P213B as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.
5. How can I repair OBDII code P213B?
- Repairing code P213B involves addressing the root cause of the issue, which may include replacing a faulty EGR throttle control sensor, repairing damaged wiring, cleaning or replacing the EGR valve, or fixing any other related component.
6. Can a dirty EGR valve cause OBDII code P213B?
- Yes, a dirty or clogged EGR valve can cause insufficient flow through the EGR system, which may trigger code P213B. Regular maintenance and cleaning of the EGR valve can help prevent this issue.
7. Will resetting the Check Engine Light resolve OBDII code P213B?
- Simply resetting the Check Engine Light will not fix the underlying issue causing code P213B. It is important to diagnose and repair the root cause of the problem to prevent the code from reoccurring.
8. Are there any DIY tips for addressing OBDII code P213B?
- DIY tips for addressing code P213B may include checking and cleaning the EGR valve, inspecting the wiring for damage, and ensuring all connections are secure before seeking professional help if needed.
9. What role does the EGR system play in triggering OBDII code P213B?
- The EGR system's function is to reduce nitrogen oxide emissions by recirculating a portion of the exhaust gases back into the combustion chamber. Issues within this system, such as a faulty component or sensor, can lead to the triggering of code P213B.
10. Can a bad EGR throttle control sensor cause OBDII code P213B?
- Yes, a malfunctioning EGR throttle control sensor can cause code P213B by failing to accurately regulate the EGR system's operation, leading to performance issues and triggering the fault code.
Discuss the causes and fixes for P213B OBDII Code
Code P213B comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.