P2139 Dodge Code - Throttle/Pedal Position Sensor/Switch 'D'/'F' Voltage Correlation
Quick Answer
The P2139 diagnostic trouble code for Dodge vehicles indicates an issue with the Throttle/Pedal Position Sensor/Switch 'D'/'F' Voltage Correlation. Common causes include Faulty throttle position sensor, Faulty pedal position sensor, Wiring or connection issues between the sensors and ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2139 Dodge indicates Throttle/Pedal Position Sensor/Switch 'D'/'F' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle position sensor, Faulty pedal position sensor, Wiring or connection issues between the sensors and ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2139 Dodge Description
The P2139 diagnostic trouble code for Dodge vehicles indicates an issue with the Throttle/Pedal Position Sensor/Switch 'D'/'F' Voltage Correlation. This code is often triggered when there is a discrepancy between the voltage signals from the throttle position sensor and the pedal position sensor. The throttle position sensor is responsible for monitoring the position of the throttle valve, which controls the airflow into the engine. The pedal position sensor, on the other hand, detects the position of the accelerator pedal and sends this information to the engine control module (ECM). When there is a voltage correlation issue between these sensors, it can lead to various performance problems in the vehicle.
Common Causes of P2139 Dodge
- Faulty throttle position sensor
- Faulty pedal position sensor
- Wiring or connection issues between the sensors and ECM
- ECM malfunction
- Corrosion or damage to sensor connectors
Symptoms of P2139 Dodge
- Rough idling
- Hesitation during acceleration
- Stalling
- Reduced fuel efficiency
- Increased emissions
How to Fix P2139 Dodge
- Diagnose the issue by using a scan tool to read the fault codes and check the voltage signals from the throttle and pedal position sensors.
- Inspect the wiring and connectors for any damage or corrosion. Repair or replace as necessary.
- Test the throttle position sensor and pedal position sensor using a multimeter to ensure they are functioning correctly.
- If the sensors are faulty, replace them with OEM or high-quality aftermarket parts.
- Clear the fault codes from the ECM and perform a test drive to verify that the issue has been resolved.
Cost to Fix P2139 Dodge
The typical repair costs for addressing a P2139 code on a Dodge vehicle can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check with local auto repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P2139 Dodge code?
Need more information on how to fix the P2139 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2139 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2139 Dodge Code
1. What does OBDII code P2139 mean for a Dodge vehicle?
P2139 indicates a voltage correlation issue between the throttle/pedal position sensors 'D' and 'F', which affects the vehicle's ability to measure throttle input accurately.
2. What are common symptoms of code P2139 in Dodge vehicles?
Symptoms include reduced engine performance, poor throttle response, engine hesitation, or activation of limp mode.
3. What causes P2139 in Dodge vehicles?
Common causes include faulty throttle position sensors, damaged wiring or connectors, or issues with the electronic throttle control system.
4. Can a dirty throttle body cause P2139?
Yes, a dirty or contaminated throttle body can disrupt the sensors' readings and lead to the P2139 code.
5. How do I diagnose P2139 in my Dodge?
Inspect the throttle/pedal position sensors, wiring, and connectors for damage or corrosion, and perform voltage tests to confirm sensor functionality.
6. Can I drive my Dodge with P2139?
Driving with P2139 is not recommended as it can lead to reduced engine performance or sudden loss of acceleration.
7. How can I fix code P2139 in a Dodge?
Repair steps may include cleaning the throttle body, replacing faulty sensors, fixing damaged wiring, or recalibrating the throttle control system.
8. Does P2139 require sensor replacement?
Not always; it could be a wiring issue or a need for cleaning and recalibration. Proper diagnosis is essential.
9. Will clearing the code fix P2139 permanently?
Clearing the code without addressing the underlying issue will only provide a temporary solution, and the code is likely to return.
10. How much does it cost to repair P2139 in a Dodge?
Costs vary based on the cause but typically range from $100 to $500 for parts and labor, depending on whether sensors, wiring, or other components need replacement.
Discuss the causes and fixes for P2139 Dodge OBDII Code
Code P2139 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.