P2138 Lexus Code - Throttle Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation
Quick Answer
The P2138 diagnostic trouble code for Lexus vehicles indicates an issue with the Throttle Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation. Common causes include Faulty throttle pedal position sensor, Wiring issues or corrosion, Sensor misalignment or calibration problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 Lexus indicates Throttle Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle pedal position sensor, Wiring issues or corrosion, Sensor misalignment or calibration problems.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 Lexus Description
The P2138 diagnostic trouble code for Lexus vehicles indicates an issue with the Throttle Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation. This means that there is a discrepancy or inconsistency in the voltage readings between these sensors, which are responsible for monitoring the position of the throttle pedal. The throttle pedal position sensors play a crucial role in the operation of the electronic throttle control system, which regulates the amount of air entering the engine based on the driver's input.
Common Causes of P2138 Lexus
- Faulty throttle pedal position sensor
- Wiring issues or corrosion
- Sensor misalignment or calibration problems
- Electronic control module (ECM) malfunction
- Intermittent electrical faults
Symptoms of P2138 Lexus
- Erratic throttle response
- Lack of power
- Hesitation or surging while driving
- Engine stalling
- Limp mode activation
How to Fix P2138 Lexus
- Diagnose the issue using a diagnostic scanner to confirm the P2138 code.
- Inspect the throttle pedal position sensor and wiring for any signs of damage or wear.
- Test the voltage readings from sensors 'D' and 'E' to identify any discrepancies.
- Replace any faulty sensors or repair wiring connections as needed.
- Clear the error code and reset the ECM to ensure the issue has been resolved.
Cost to Fix P2138 Lexus
The cost of repairing the Throttle Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation issue can vary depending on the extent of the problem and the specific components that need to be replaced. In general, the cost of parts for this repair can range from $100 to $300, while labor costs can add an additional $100 to $200. Overall, the total repair costs for addressing the P2138 code typically fall between $200 and $500. It is important to note that these estimates are rough guidelines and actual costs may vary based on the factors mentioned earlier.
Need more information about the P2138 Lexus code?
Need more information on how to fix the P2138 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 Lexus Code
1. What does the OBDII code P2138 mean on a Lexus?
P2138 indicates a voltage correlation issue between the Throttle Pedal Position Sensor/Switch 'D' and 'E', suggesting a potential problem with the accelerator pedal assembly or related wiring.
2. What are the common symptoms of code P2138 in a Lexus?
Common symptoms include reduced engine power, the vehicle going into "limp mode," delayed throttle response, or the illumination of the Check Engine Light.
3. What causes the P2138 code to appear on a Lexus?
The code is usually caused by a faulty throttle pedal position sensor, damaged or corroded wiring, poor connections, or a malfunction in the engine control module (ECM).
4. Can I drive my Lexus with the P2138 code?
It’s not recommended to drive with this code, as it may cause unpredictable throttle behavior or limit engine power, which can be unsafe in certain situations.
5. How can I fix the P2138 code on my Lexus?
Start by inspecting and cleaning the throttle pedal sensor connectors and wiring. If the issue persists, the throttle pedal assembly may need to be replaced or the ECM inspected.
6. How much does it cost to repair the P2138 code on a Lexus?
Repairs may cost between $100 and $300 for parts and labor, depending on whether the throttle pedal assembly or wiring needs replacement.
7. Can a dirty throttle body cause the P2138 code?
While a dirty throttle body can cause other throttle-related issues, it typically does not trigger the P2138 code, which is related to the pedal sensor.
8. What tools are needed to diagnose the P2138 code on a Lexus?
You’ll need an OBDII scanner, a multimeter to test voltage, and possibly wiring diagrams to inspect the sensor and connections.
9. Does the P2138 code always mean the throttle pedal sensor is bad?
No, the issue could also stem from wiring problems, corroded connectors, or a fault in the ECM.
10. How can I prevent the P2138 code from reoccurring on my Lexus?
Regularly inspect and clean the throttle pedal sensor connectors, avoid water exposure to the wiring, and ensure repairs are performed using quality parts.
Discuss the causes and fixes for P2138 Lexus OBDII Code
Code P2138 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.