P2138 2015 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation
Quick Answer
The P2138 diagnostic trouble code (DTC) for a 2015 Toyota RAV4 indicates a problem with the Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation. Common causes include Faulty throttle pedal position sensor, Malfunctioning throttle position sensor, Wiring or connector issues in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2015 Toyota RAV4 indicates Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle pedal position sensor, Malfunctioning throttle position sensor, Wiring or connector issues in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2015 Toyota RAV4 Description
The P2138 diagnostic trouble code (DTC) for a 2015 Toyota RAV4 indicates a problem with the Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation. This code is specifically related to the correlation between the voltage signals from the throttle pedal position sensor and throttle position sensor. In modern vehicles, the throttle pedal position sensor detects the position of the accelerator pedal and sends this information to the engine control module (ECM). The throttle position sensor, on the other hand, monitors the actual position of the throttle plate in the throttle body.
Common Causes of P2138 2015 Toyota RAV4
- Faulty throttle pedal position sensor
- Malfunctioning throttle position sensor
- Wiring or connector issues in the sensor circuit
- ECM software or hardware problems
- Environmental factors such as moisture or corrosion affecting sensor operation
Symptoms of P2138 2015 Toyota RAV4
- Hesitation or lack of response when pressing the accelerator pedal
- Rough idling or unstable engine RPM
- Reduced engine power or acceleration
- Illumination of the Check Engine Light
- Stalling or difficulty starting the engine
How to Fix P2138 2015 Toyota RAV4
- Diagnose the specific sensor causing the issue using a diagnostic scan tool.
- Inspect the wiring and connectors for any damage or corrosion.
- Replace the faulty throttle pedal position sensor or throttle position sensor.
- Clear the DTC and perform a throttle relearn procedure to recalibrate the sensors.
- Test drive the vehicle to ensure the issue has been resolved and the code does not reappear.
Cost to Fix P2138 2015 Toyota RAV4
The cost of repairing a P2138 code on a 2015 Toyota RAV4 can vary depending on the specific cause of the issue. In general, replacing a throttle pedal position sensor or throttle position sensor can range from $100 to $300 for parts, with additional labor costs of $100 to $200. Overall, the total repair cost could be anywhere from $200 to $500. It's important to note that these are rough estimates, and actual costs may vary based on the location, labor rates, and any additional parts or services required. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate.
Need more information about the P2138 2015 Toyota RAV4 code?
Need more information on how to fix the P2138 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2015 Toyota RAV4 Code
1. What does the OBDII code P2138 mean on a 2015 Toyota RAV4?
The P2138 code indicates a voltage correlation issue between the throttle pedal position sensors 'D' and 'E,' which monitor the accelerator pedal's position.
2. What are the common symptoms of the P2138 code in a 2015 Toyota RAV4?
Symptoms include reduced engine power (limp mode), unresponsive acceleration, the check engine light turning on, and possible hesitation when pressing the accelerator.
3. What causes the P2138 code on a 2015 Toyota RAV4?
Common causes include a faulty accelerator pedal position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the vehicle's engine control module (ECM).
4. Can I drive my 2015 Toyota RAV4 with the P2138 code?
It’s not recommended to drive with this code active, as it may cause unpredictable acceleration or reduced power, which can compromise safety.
5. How do I fix the P2138 code on my 2015 Toyota RAV4?
Repairs may include replacing the accelerator pedal position sensor, repairing damaged wiring or connectors, or recalibrating the ECM if no hardware issues are found.
6. How much does it cost to fix the P2138 code on a 2015 Toyota RAV4?
Repair costs can range from $150 to $500, depending on whether the issue is the sensor, wiring, or throttle body.
7. Can a dirty throttle body cause the P2138 code on a 2015 Toyota RAV4?
While rare, a dirty throttle body can potentially cause correlation issues. Cleaning it may resolve the problem if the throttle body is contributing to the fault.
8. How do mechanics diagnose the P2138 code on a 2015 Toyota RAV4?
Mechanics use an OBDII scanner to retrieve the code, inspect the throttle pedal position sensors, check for wiring damage, and test the voltage signals from the sensors to confirm the issue.
9. Does the P2138 code mean the throttle pedal position sensor needs to be replaced?
Not always. While the sensor is a common cause, the issue could also be due to wiring, connectors, or a malfunction in the ECM.
10. Can a weak battery cause the P2138 code on a 2015 Toyota RAV4?
A weak or failing battery might contribute to voltage issues, but it’s not a common cause of this code. It’s worth checking the battery and charging system as part of the diagnosis.
Discuss the causes and fixes for P2138 2015 Toyota RAV4 OBDII Code
Code P2138 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.