P2138 2013 Toyota RAV4 Code - Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation
Quick Answer
The P2138 diagnostic trouble code (DTC) in a 2013 Toyota RAV4 indicates a problem with the Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation. Common causes include Faulty throttle pedal position sensor/switch 'D' or 'E', Wiring or connector issues in the throttle control system, ECM software or hardware malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2013 Toyota RAV4 indicates Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation.
- Common causes
- Common causes include Faulty throttle pedal position sensor/switch 'D' or 'E', Wiring or connector issues in the throttle control system, ECM software or hardware malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2013 Toyota RAV4 Description
The P2138 diagnostic trouble code (DTC) in a 2013 Toyota RAV4 indicates a problem with the Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation. This code specifically relates to a discrepancy between the voltage signals from two separate throttle position sensors or switches in the electronic throttle control system. In modern vehicles like the 2013 Toyota RAV4, the throttle pedal position sensor detects the position of the accelerator pedal and sends signals to the engine control module (ECM) to adjust the throttle opening accordingly. The ECM uses this information to control the engine's throttle opening and fuel injection for optimal performance and fuel efficiency.
Common Causes of P2138 2013 Toyota RAV4
- Faulty throttle pedal position sensor/switch 'D' or 'E'
- Wiring or connector issues in the throttle control system
- ECM software or hardware malfunction
- Throttle body malfunction or carbon buildup
- Accelerator pedal assembly issues
Symptoms of P2138 2013 Toyota RAV4
- Reduced engine power
- Sluggish acceleration
- Poor fuel efficiency
- Stalling or rough idling
How to Fix P2138 2013 Toyota RAV4
- Diagnose the specific cause of the voltage correlation issue by using a scan tool to check for any related trouble codes and perform a thorough inspection of the throttle control system.
- Test the throttle pedal position sensor/switch 'D' and 'E' for proper voltage signals and resistance values to determine if they are functioning correctly.
- Inspect the wiring harness and connectors for any signs of damage, corrosion, or loose connections. Repair or replace any faulty components as needed.
- Clean the throttle body to remove any carbon buildup that may be affecting its operation. If necessary, replace the throttle body.
- Reset the ECM and perform a throttle relearn procedure to recalibrate the throttle position sensor and ensure proper operation.
Cost to Fix P2138 2013 Toyota RAV4
The typical repair costs for addressing a P2138 code in a 2013 Toyota RAV4 can vary depending on the specific cause of the issue. In general, replacing a faulty throttle pedal position sensor or switch can cost between $100 and $200, while addressing wiring or connector issues may range from $50 to $150. Cleaning or replacing the throttle body can add another $100 to $300 to the total repair cost. Labor rates at auto repair shops typically range from $80 to $150 per hour, so the total cost can vary based on the time required for diagnosis and repair. It's advisable to consult with a qualified mechanic or dealership for a more accurate estimate based on your vehicle's specific needs and location.
Need more information about the P2138 2013 Toyota RAV4 code?
Need more information on how to fix the P2138 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2013 Toyota RAV4 Code
1. What does OBDII code P2138 on a 2013 Toyota RAV4 indicate?
The code P2138 indicates a Throttle Pedal Position Sensor/Switch 'D'/'E' Voltage Correlation issue in the vehicle.
2. What are the common symptoms of a P2138 error in a 2013 Toyota RAV4?
Common symptoms include reduced engine power, poor acceleration, stalling, and the vehicle going into limp mode.
3. What are the potential causes of the P2138 code in a 2013 Toyota RAV4?
Potential causes may include a faulty throttle position sensor, damaged wiring or connectors, issues with the throttle body, or a problem with the engine control module.
4. How can I diagnose the P2138 error in my 2013 Toyota RAV4?
Diagnostic steps may involve checking the throttle position sensor's voltage, inspecting wiring for damage, testing the throttle body, and scanning the vehicle's computer for other related fault codes.
5. How serious is the P2138 error code in a 2013 Toyota RAV4?
While the vehicle may still be operable with this code, it is crucial to address it promptly to avoid potential safety hazards and further damage to the engine or related components.
6. Can I drive my 2013 Toyota RAV4 with the P2138 code?
It is not recommended to drive the vehicle with the P2138 code present, as it can lead to performance issues and potentially unsafe driving conditions.
7. What are some repair tips for fixing the P2138 error in a 2013 Toyota RAV4?
Repair tips may include checking and cleaning throttle body connections, replacing the throttle position sensor, repairing damaged wiring, or resetting the engine control module.
8. How much does it cost to repair the P2138 code in a 2013 Toyota RAV4?
The cost of repair can vary depending on the specific cause of the issue, parts needed, and labor costs. It is advisable to consult with a mechanic for an accurate estimate.
9. Can I reset the P2138 code in my 2013 Toyota RAV4 without repairing the issue?
While you can clear the code using an OBDII scanner, it is essential to address the underlying problem to prevent the code from reoccurring and potentially causing further damage.
10. How can I prevent the P2138 code from appearing in my 2013 Toyota RAV4 in the future?
Regular maintenance, such as cleaning throttle components, checking wiring integrity, and addressing any related issues promptly, can help prevent the recurrence of the P2138 error code.
Discuss the causes and fixes for P2138 2013 Toyota RAV4 OBDII Code
Code P2138 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.