P2138 2012 Nissan Sentra Code - Accelerator Pedal Position Sensor Circuit Range/Performance
Quick Answer
The P2138 diagnostic trouble code (DTC) for a 2012 Nissan Sentra indicates a potential issue with the accelerator pedal position sensor circuit's range or performance. Common causes include Faulty accelerator pedal position sensor, Damaged or corroded wiring/connectors in the sensor circuit, ECM software or hardware issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2138 2012 Nissan Sentra indicates Accelerator Pedal Position Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Damaged or corroded wiring/connectors in the sensor circuit, ECM software or hardware issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P2138 2012 Nissan Sentra Description
The P2138 diagnostic trouble code (DTC) for a 2012 Nissan Sentra indicates a potential issue with the accelerator pedal position sensor circuit's range or performance. The accelerator pedal position sensor (APPS) is a component that detects and communicates the position of the accelerator pedal to the engine control module (ECM) to adjust fuel injection and ignition timing. When the ECM receives inconsistent or out-of-specification signals from the APPS, it triggers the P2138 code.
Common Causes of P2138 2012 Nissan Sentra
- Faulty accelerator pedal position sensor
- Damaged or corroded wiring/connectors in the sensor circuit
- ECM software or hardware issues
- Throttle body malfunction or calibration problems
- Environmental factors such as moisture intrusion or vibration damage
Symptoms of P2138 2012 Nissan Sentra
- Unresponsive or delayed throttle response
- Erratic acceleration or surging while driving
- Engine stalling or hesitation
- Illumination of the check engine light
- Vehicle entering limp mode
How to Fix P2138 2012 Nissan Sentra
- Diagnose the issue using a professional OBD-II scanner to confirm the P2138 code and identify the specific cause.
- Inspect the accelerator pedal position sensor, wiring, and connectors for any visible damage or corrosion. Replace any faulty components.
- Check the throttle body for proper operation and calibration. Clean or replace the throttle body if necessary.
- Clear the DTC and reset the ECM to recalibrate the accelerator pedal position sensor.
- Test drive the vehicle to ensure the issue has been resolved and the accelerator pedal responds correctly.
Cost to Fix P2138 2012 Nissan Sentra
The typical repair costs for addressing a P2138 code on a 2012 Nissan Sentra can range from $150 to $500, including parts and labor. However, the actual cost may vary depending on the specific cause of the issue, the need for component replacement, and the labor rates at the auto repair shop. It is advisable to consult with a professional mechanic to obtain an accurate estimate based on the vehicle's condition and location.
Need more information about the P2138 2012 Nissan Sentra code?
Need more information on how to fix the P2138 2012 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2138 2012 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2138 2012 Nissan Sentra Code
What does the OBDII code P2138 mean on a 2012 Nissan Sentra?
The P2138 code indicates that there is a problem with the Accelerator Pedal Position (APP) Sensor Circuit Range/Performance. This means that the signal received by the engine control module (ECM) from the APP sensor is out of the expected range or is performing poorly.
What symptoms might I notice if my 2012 Nissan Sentra has the P2138 code?
Symptoms of the P2138 code can include poor engine response when pressing the accelerator, engine stalling or hesitating, the engine entering "limp-home" mode, and the Check Engine Light turning on.
What causes the P2138 code to appear on a 2012 Nissan Sentra?
The P2138 code can be triggered by several issues, including faulty accelerator pedal position sensors, poor electrical connections at the accelerator pedal position sensor, damaged wiring in the APP sensor circuit, or faults within the ECM itself.
How can I fix the P2138 code on my 2012 Nissan Sentra?
To fix the P2138 code, start by inspecting the accelerator pedal position sensor and its connections for any signs of damage or loose connections. Replace the sensor if it appears faulty. Check the wiring for any damage or shorts, and repair as necessary. If the wiring and sensor are in good condition, consider having the ECM checked and possibly reprogrammed or replaced by a professional.
Is it safe to drive my 2012 Nissan Sentra with the P2138 code?
While you can technically still drive your vehicle, it is not advisable to do so with the P2138 code active. The vehicle may experience reduced performance, unexpected stalling, or go into limp mode, which can compromise your safety and the safety of others on the road.
Can a faulty APP sensor on a 2012 Nissan Sentra affect fuel economy?
Yes, a faulty APP sensor can affect fuel economy. If the sensor is not accurately measuring the position of the accelerator pedal, it can lead to improper fuel delivery, which in turn can decrease the vehicle's fuel efficiency.
What tools are needed to diagnose the P2138 code on a 2012 Nissan Sentra?
To diagnose the P2138 code, you will need an OBD-II scanner to read the code and monitor live data. Additionally, a digital multimeter can be useful for checking the integrity of the sensor and wiring.
How much does it typically cost to repair the P2138 code in a 2012 Nissan Sentra?
The cost to repair the P2138 code can vary widely depending on the underlying cause. If the issue is simply a loose connection or minor wiring repair, costs may be low. However, if the accelerator pedal position sensor or the ECM needs replacement, the repair could be more expensive, potentially ranging from $150 to $600.
Discuss the causes and fixes for P2138 2012 Nissan Sentra OBDII Code
Code P2138 2012 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.